Open Access Open Access  Restricted Access Subscription Access

Investigation of the Trail Environment to Enhance the Efficiency of the Solar Cell through Pre-Installation Study


Affiliations
1 Department of Physics, Birla Institute of Technology, Mesra, Ranchi, 835 215, India
 

This research investigates the performance of solar photovoltaic modules in real-world climatic conditions at various locations in India using MATLAB simulation. The study utilizes a single-diode model and a detailed simulation of a solar PV module to analyze the P-V and I-V characteristics of the module on a monthly basis. The month-wise power output is evaluated in relation to temperature and solar irradiance under various weather conditions. To model the PV module, the input parameters such as solar irradiance and temperature were first determined, and an appropriate PV panel model was selected based on the complexity and accuracy required. The PV panel model was then set up in MATLAB and run to generate the output data. The simulated results were compared to the verified data sheet of the JAM60S10-350/MR module, demonstrating that the simulation accurately represents the PV solar module's performance curve. The study aims to identify the most efficient locations for installing solar PV modules for optimal efficiency. Different models such as single-diode, two-diode, and PV system model can be used to model PV panels depending on the specific conditions being simulated and the level of accuracy required.

Keywords

Irradiance, MATLAB Modeling, Renewable Energy, Solar Photovoltaic, Solar Simulation.
User
Notifications
Font Size

  • Shahzad B K & Yousaf M, Coal fired power plants: Emission problems and controlling techniques, J Earth Sci Clim Change, 8(404) (2017) 2, DOI:10.4172/2157-7617.1000404.
  • Perera F, Pollution from fossil-fuel combustion is the leading environmental threat to global pediatric health and equity:Solutions exist, Int J Environ Res Public Health, 15(1) (2018) 16.
  • Bansal H O & Goyal P, Enablers and barriers of electric vehicle in india: A review, in 2020 IEEE Int Symon Sus Ener Sig Proc Cyb Sec iSSSC (Gunupur Odisha, India) 2020, 1–5.
  • MNRE “Physical Progress”, 2021, [www.mnre.gov.in (21 January 2022)]
  • Miyan M, Growth of the renewable energy in India, Int J Pure Appl Res, 3(1) (2018) 1–7.
  • BP Statistical review of world energy, 2022. [www.bp.com (3 January 2023)]
  • "Physical Progress (Achievements)"- [www.mnre.gov.in (3 January 2023)]
  • Amit K, Sharma R, Pransu G & Boxman R L, Evaluation of the Photo Electrode Degradation in Dye Sensitized Solar Cells, Russ J Electrochem, 55 (2019) 829–40, DOI:10.1134/S1023193519090039
  • Sharma R, Amit K, Barhai P K & Boxmann R L, Evaluating the performance of dye-sensitized solar cell with various key components such as electrodes, dyes, and electrolytes, Proc Int Conf Nanoelect Cir Comm Sys (Springer Singapore) 2017, 371–379, DOI: 10.1007/978-981-10-2999-8_31.
  • Kumar A & Sharma R, The role of pressure to quantify the defects and its effect on the morphology of graphene layers, Surf Rev Lett, 25(02) (2018) 1850055, DOI:10.1142/S0218625X18500555
  • Assadi M K, Bakhoda S, Saidur R & Hanaei H, Recent progress in perovskite solar cells, Renew Sust Energ Rev, 81 (2018) 2812–2822, DOI:10.1016/j.rser.2017.06.088
  • Qin X, Zhao Z, Wang Y, Wu J, Jiang Q & You J, Recent progress in stability of perovskite solar cells, J Semicond, 38(1) (2017) 011002, DOI: 10.1088/1674-4926/38/1/011002
  • Nasr A, Theoretical model for observation of the conversion efficiency into quantum dot solar cells, J Energy Eng, 142(1) (2016) 04015002, DOI: 10.1061/(ASCE)EY.1943-7897.0000262
  • El-Aassere M A, Performance optimization of bilayer organic photovoltaic cells, J Optoelectron Adv Mater, 18 (2016) 775–84.
  • Chakraborty N, Sharma R, Singh R K, Mukherjee S K & Sharma N, PEDOT: PSS-doped graphene oxide as an alternative to hole transport material and transparent conducting electrode, Nano, 17 (2022) 2250115, DOI: 10.1142/S1793292022501156
  • Aldali Y, Celik A & Muneer T, Modeling and experimental verification of solar radiation on a sloped surface, photovoltaic cell temperature, and photovoltaic efficiency, J Energy Eng, 139(1) (2013) 8–11, DOI:10.1061/(ASCE)EY.1943-7897.0000082
  • Hanen S, Mohamed B A & Hekmet S, Effect of electrical model, temperature, and generation rate on the photovoltaic module parameters, J Energy Eng, 142(3) (2016) 04015024,DOI:10.1061/(ASCE)EY.1943-7897.0000282
  • Nguyen X H & Nguyen M P, Mathematical modeling of photovoltaic cell/module/arrays with tags in matlab/simulink, Environ Syst Res, 4 (2015) 1–13, DOI:10.1186/s40068-015-0047-9
  • Fara L, Moraru A G, Sterian P, Bobei A P, Diaconu A & Fara S, Building integrated photovoltaic (BIPV) systems in Romania, monitoring, modelling and experimental validation, J Optoelectron Adv Mater, 15 (2013) 125–130.
  • Fara S, Sterian P, Fara L & Iancu M, Influence of the optical parameters of the quantum well solar cells upon conversion efficiency, J Optoelectron Adv Mater, 12 (2010) 129–134.
  • Rekioua D & Matagne E, Optimization of Photovoltaic Power Systems: Modelization, Simulation and Control, (Springer Science & Business Media) 2012.
  • Rahman M H, Akter S & Chowdhury S, Evaluation of power performance of solar module using two diode model with MATLAB simulation, Adv J Grad Res, 13(1) (2023) 8–17, DOI:10.21467/ajgr.13.1.8-17
  • Jha V, Generalized modelling of PV module and different PV array configurations under partial shading condition, Sustain Energy Technol Assess, 56 (2023) 103021, DOI: 10.1016/j.seta.2023.103021
  • Das S K, Sinha M K & Prasad A K, Designing and simulation of double stage grid-linked PV system using MATLAB/Simulink, Proc in 2020 Rec adv in Power Sys EPREC (Springer Nature Singapore, Singapore) 2023, 169–195, DOI: 10.1007/978-981-19-6605-7_13
  • Koondhar M A, Laghari I A, Asfaw B M, Kumar R R & Lenin A H, Experimental and simulation-based comparative analysis of different parameters of PV module, Sci Afr, 16 (2022) e01197.
  • Kumar R & Singh S K, Solar Photovoltaic Modeling and Simulation: As a renewable energy solution, Energy Rep, 4 (2018) 701–712, DOI:10.1016/j.egyr.2018.09.008
  • Rahim N A, Ping H W & Selvaraj J, Photovoltaic module modeling using simulink/matlab, Procedia Environ Sci, 17 (2013) 537–546.
  • Patel J & Sharma G, Modeling and simulation of solar photovoltaic module using Matlab/simulink, Int J Res Eng Technol, 2(3) (2013) 2319–1163.
  • Yatimi H & Aroudam E H, A Detailed Study and modeling of photovoltaic module under real climatic conditions, Int J Electron Elect Eng, 3(3) (2015) 171–176.
  • Abdel Hady R, Modeling and simulation of a micro grid-connected solar pv system, Water Sci, 31(1) (2017) 1–10, DOI:10.1016/j.wsj.2017.04.001
  • Fara L & Craciunescu D, Output analysis of stand-alone PV systems: modeling, simulation and control, Energy Procedia, 112 (2017) 595–605, DOI:10.1016/j.egypro.2017.03.1125
  • Singh P, Mandpura A K & Yadav V K, Power forecasting in photovoltaic system using hybrid ANN and wavelet transform based method, J Sci Ind Res, 82(1) (2022) 63–74, DOI: 10.56042/jsir.v82i1.69939
  • Stefan D, Matlab/Simulink solar cell model based on electrical parameters at only one operating condition, 18th Int Conf on Sys Theory Cont Comp ICSTCC (Sinaia, Romania) 2014, 709–714, DOI: 10.1109/icstcc.2014.6982501
  • Green M A. Solar cells: operating principles, technology, and system applications, (Englewood Cliffs.) 1982.
  • Luque A & Hegedus, S, Handbook of photovoltaic science and engineering, 1st edn, (John Wiley & Sons) 2011.
  • McEvoy A & Markvart T, Practical handbook of photovoltaics: fundamentals and applications, 2nd Edn, (Elsevier) 2003.
  • List of SRRA Stations with Co-ordinate’s - Phase II. [www.niwe.res.in (21 January 2022)]

Abstract Views: 75

PDF Views: 61




  • Investigation of the Trail Environment to Enhance the Efficiency of the Solar Cell through Pre-Installation Study

Abstract Views: 75  |  PDF Views: 61

Authors

Manu PriyaDarshani
Department of Physics, Birla Institute of Technology, Mesra, Ranchi, 835 215, India
Ritu Shaw
Department of Physics, Birla Institute of Technology, Mesra, Ranchi, 835 215, India
Rishi Sharma
Department of Physics, Birla Institute of Technology, Mesra, Ranchi, 835 215, India

Abstract


This research investigates the performance of solar photovoltaic modules in real-world climatic conditions at various locations in India using MATLAB simulation. The study utilizes a single-diode model and a detailed simulation of a solar PV module to analyze the P-V and I-V characteristics of the module on a monthly basis. The month-wise power output is evaluated in relation to temperature and solar irradiance under various weather conditions. To model the PV module, the input parameters such as solar irradiance and temperature were first determined, and an appropriate PV panel model was selected based on the complexity and accuracy required. The PV panel model was then set up in MATLAB and run to generate the output data. The simulated results were compared to the verified data sheet of the JAM60S10-350/MR module, demonstrating that the simulation accurately represents the PV solar module's performance curve. The study aims to identify the most efficient locations for installing solar PV modules for optimal efficiency. Different models such as single-diode, two-diode, and PV system model can be used to model PV panels depending on the specific conditions being simulated and the level of accuracy required.

Keywords


Irradiance, MATLAB Modeling, Renewable Energy, Solar Photovoltaic, Solar Simulation.

References