A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
R, Hanumantharaya
- Mechanical and wear behaviour of flyash reinforced epoxy composites
Authors
1 School of Mechanical Engineering, REVA University, Bengaluru, IN
2 Department of Automobile Engineering, Malnad College of Engineering, Hassan, IN
3 Department of Mechanical Engineering, Sahyadri College of Engineering, Mangalore, Karnataka,, IN
Source
Journal of Mines, Metals and Fuels, Vol 69, No 12A (2021), Pagination: 78-83Abstract
In this research, a flyash/epoxy composite was fabricated using conventional hand layup method. The mechanical and tribological behaviour of composite was investigated by changing the volume of flyash to 5, 10 and 15% vol. The mechanical properties such as compression strength, hardness, impact strength and tensile strengths were determined as per ASTM standards. Results reveal that the mechanical properties, such as density, tensile strength and the compression strength increased as the amount of flyash increased up to a critical point, decreased with further increment in percentage of flyash. Tribological results reveal that, when the percentage of flyash is increased there is a significant decrease in wear volume loss. The minimum wear loss is observed at the optimum values for loads 15N, speed 300rpm and distance is 300mKeywords
Boron carbide, flyash, hybrid composites, hand layupReferences
- Liu, Y., Du, H., Liu, L. and Leng, J. (2014): Shape memory polymers and their composites in aerospace applications: a review. Smart Materials and Structures, 23(2), 023001.
- Yu, Z., Niu, X., Liu, Z. and Pei, Q. (2011): Intrinsically stretchable polymer light emitting devices using carbon nanotube polymer composite electrodes. Advanced materials, 23(34), 3989-3994.
- Lau, K. T., Gu, C. and Hui, D. (2006): A critical review on nanotube and nanotube/nanoclay related polymer composite materials. Composites PartB: Engineering, 37(6), 425-436.
- Patankar, S. N. and Kranov, Y. A. (2010): Hollow glass microsphere HDPE composites for low energy sustainability. Materials Science and Engineering: A, 527(6), 1361-1366.
- Vishwanath, B., Verma, A. P., Rao, C. V. S. K. and Gupta, R. K. (1993). Effect of different matrices on wear characteristics of glass woven roving/polymer composites. Composites, 24(4), 347-353.
- Thostenson, E. T., Ren, Z. and Chou, T. W. (2001): Advances in the science and technology of carbon nanotubes and their composites: a review. Composites science and technology, 61(13), 1899-1912.
- Singla, M. and Chawla, V. (2010): Mechanical properties of epoxy resin– flyash composite. Journal of Minerals & Materials Characterization & Engineering, 9(3), 199-210.
- Subham, P. and Tiwari, S. K. (2013): Effect of flyash concentration and its surface modification on fiber reinforced epoxy composite 2s mechanical properties. IJSER, 4, 1173-1180.
- Hanumantharaya, R., Sogalad, I., Basavarajappa, S. and Patel, G. M. (2019). Modelling and optimisation of adhesive bonded joint strength of composites for aerospace applications. International Journal of Computational Materials Science and Surface Engineering, 8(3-4), 167-184.
- Rangaswamy, H., Sogalad, I., Basavarajappa, S. and Chandrashekarappa, M. P. G. (2019): A comprehensive modelling, analysis and optimisation of adhesive bonded single lap glass fibre reinforced composite joints. International Journal of Materials Engineering Innovation, 10(4), 286-309.
- Rangaswamy, H., Sogalad, I., Basavarajappa, S., Acharya, S. and Manjunath Patel, G. C. (2020). Experimental analysis and prediction of strength of adhesive-bonded single-lap composite joints: Taguchi and artificial neural network approaches. SN Applied Sciences, 2, 1-15.
- Venkatesha, B. K. and Saravanan, R. (2020): Effect of Cenosphere Addition on Mechanical Properties of Bamboo and E-Glass Fiber Reinforced Epoxy Hybrid Composites. International Journal of Vehicle Structures and Systems, 12(4), 447-451. https://doi.org/ 10.4273/ijvss.12.4.18
- Hanumantharaya, R., Sogalad, I. and Basavarajappa, S. (2020): Investigations on the influence of nano reinforcement on strength of adhesively bonded joints. Materials Today: Proceedings.
- Mohammed Razzaq, A., Majid, D. L., Ishak, M. R. and Basheer, U. M. (2017): Effect of flyash addition on the physical and mechanical properties of AA6063 alloy reinforcement. Metals, 7(11), 477.
- Tang, Q., Liu, Y., Gu, F. and Zhou, T. (2016): Solidification/stabilization of flyash from a municipal solid waste incineration facility using Portland cement. Advances in Materials Science and Engineering.
- Mahesha, N. S., Hanumantharaya, R.,Mahesh, B. D., Ramakrishna, D. P. Shivakumar, K. M. (2016): Tribological wear behaviour of AISI 630 (17-4 PH) stainless steel hardened by precipitation hardening. American Journal of Materials Science, 6(4A), 6-14.
- Hanumantharaya, R., Vaishak, N. L., Davanageri, M. B., Quadros, J. D., and Premkumar, B. G. (2018): Mechanical and Tribological Wear Behaviour of Epoxy Hybrid Composites. Materials Today: Proceedings, 5(2), 7947-7953.
- Gull, S., Wani, S. B. and Amin, I. Exploring optimum percentage of fly-ash as a replacement of cement for enhancement of concrete properties.
- Venkatesha, B. K., Pramod Kumar, S. K., Saravanan, R. and Ishak, A. (2020): Tension Fatigue Behaviour of Woven Bamboo and Glass Fiber Reinforced Epoxy Hybrid Composites. IOP Conference Series: Materials Science and Engineering, 1003 0120187 https://doi.org/ 10.1088/1757-899x/1003/1/012087
- Chairman, C. A., Babu, S. K., DuraiSelvam, M. and Balasubramanian, K. R. (2011). Investigation on twobody abrasive wear behaviour of titanium carbide filled glass fabric-epoxy composites-a Box-Behnken approach. International Journal of Engineering, Science and Technology, 3(4).
- Mohan, N., Natarajan, S. and KumareshBabu, S. P. (2010): Investigation on two-body abrasive wear behaviour of silicon carbide filled glass fabric-epoxy composites. Journal of Minerals and Materials Characterization and Engineering, 9(03), 231.
- Venkatesha, B. K., Saravanan R and Anand Babu, K. (2021): Effect of Moisture Absorption on Woven Bamboo/Glass Fiber Reinforced Epoxy Hybrid Composites, Materials Today Proceedings, 45 (part I), 216-221. https://doi.org/10.1016/j.matpr.2020.10.421
- A Critical Review on Nanoparticle Filled Adhesives for Structural Applications
Authors
1 School of Mechanical Engineering, REVA University, Bengaluru, Karnataka, India., IN
2 Department of Automobile Engineering, Malnad College of engineering, Hassan, Karnataka, India., IN
3 Department of Mechanical Engineering, Sahyadri College of Engineering, Mangalore, Karnataka, India., IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 10A (2022), Pagination: 88-93Abstract
The objective of this review paper is to highlight some of the noteworthy research that has been done on the use of nanoparticles (NPs) to improve the performance of adhesively bonded joints (ABJs) against delamination initiation and propagation. Various nanoparticle applications, such as carbon-based, ceramic-based, and mineral-based nanoparticles, are covered. Interlaminar shear strength, fracture toughness, and fracture energy are the major parameters that have been considered for enhancing FRP delamination and fatigue resistance.The reported results indicatethat the inclusion of NPs in polymeric matrices leads to improvement of various material properties,even though some discrepancies in the results have been noted. Notwithstanding, additional researchis required to address some of the issues that have not yet been tackled.
Keywords
Nanoparticles, Adhesives, Structural Application.References
- Cheng, J., & Taheri, F. (2006). A smart single-lap adhesive joint integrated with partially distributed piezoelectric patches. International Journal of Solids and Structures, 43(5), 1079-1092.
- Cheng, J., Taheri, F., & Han, H. (2006). Strength improvement of a smart adhesive bonded joint system by partially integrated piezoelectric patches. Journal of Adhesion Science and technology, 20(6), 503-518.
- Kinloch, A. J., & Taylor, A. C. J. Materials Sci. Letters, vol. 22, 1439-1442 (2003) Mechanical and Fracture Properties of Epoxy/Inorganic Micro-and Nano-composites.
- Korotcenkov, G. “Fundamentals of Sensing Materials Volume 2: Nanostructured Materials.” (2010).
- Yue, Z. R., Jiang, W., Wang, L., Gardner, S. D., & Pittman Jr, C. U. (1999). Surface characterization of electrochemically oxidized carbon fibers. Carbon, 37(11), 1785-1796.
- Meng, L., Fan, D., Zhang, C., Jiang, Z., & Huang, Y. (2013). The effect of oxidation treatment by KClO3/H2SO4 system on intersurface performance of carbon fibers. Applied surface science, 268, 225-230.
- Yu, S., Tong, M. N., & Critchlow, G. (2010). Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates. Materials & Design, 31, S126-S129.
- Jojibabu, P., Jagannatham, M., Haridoss, P., Ram, G. J., Deshpande, A. P., &Bakshi, S. R. (2016). Effect of different carbon nano-fillers on rheological properties and lap shear strength of epoxy adhesive joints. Composites Part A: Applied Science and Manufacturing, 82, 53-64.
- Irshidat, M. R., & Al-Saleh, M. H. (2017). Repair of heat-damaged RC columns using carbon nanotubes modified CFRP. Materials and Structures, 50(2), 1-11.
- Bikiaris, D., Vassiliou, A., Chrissafis, K., Paraskevopoulos, K. M., Jannakoudakis, A., &Docoslis, A. (2008). Effect of acid treated multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene. Polymer Degradation and Stability, 93(5), 952-967.
- Otto, D. P. (2007). Synthesis, characterization and pharmaceutical application of selected copolymer nano-particles (Doctoral dissertation, North-West University).
- Gude, M. R., Prolongo, S. G., Gómez-del Río, T., & Ureña, A. (2011). Mode-I adhesive fracture energy of carbon fibre composite joints with nanoreinforced epoxy adhesives. International Journal of Adhesion and Adhesives, 31(7), 695-703.
- Bhowmik, S., Benedictus, R., Poulis, J. A., Bonin, H. W., & Bui, V. T. (2009). High-performance nanoadhesive bonding of titanium for aerospace and space applications. International Journal of Adhesion and Adhesives, 29(3), 259-267.
- Hedia, H. S., Allie, L., Ganguli, S., &Aglan, H. (2006). The influence of nanoadhesives on the tensile properties and Mode-I fracture toughness of bonded joints. Engineering fracture mechanics, 73(13), 1826-1832.
- Razavi, S. M. J., Ayatollahi, M. R., Giv, A. N., & Khoramishad, H. (2018). Single lap joints bonded with structural adhesives reinforced with a mixture of silica nano-particles and multi walled carbon nanotubes. International Journal of Adhesion and Adhesives, 80, 76-86.
- Fereidoon, A., Kordani, N., Rostamiyan, Y., Ganji, D. D., &Ahangari, M. G. (2010). Effect of carbon nanotubes on adhesion strength of e-glass/epoxy composites and alloy aluminium surface. World Appl Sci J, 9(2), 204-210.
- Khan, U., May, P., Porwal, H., Nawaz, K., & Coleman, J. N. (2013). Improved adhesive strength and toughness of polyvinyl acetate glue on addition of small quantities of graphene. ACS applied materials & interfaces, 5(4), 1423-1428.
- Mukharjee, B. B., &Barai, S. V. (2014). Influence of nano-silica on the properties of recycled aggregate concrete. Construction and Building Materials, 55, 29-37.
- Kinloch, A. J., Lee, J. H., Taylor, A. C., Sprenger, S., Eger, C., & Egan, D. (2003). Toughening structural adhesives via nano-and micro-phase inclusions. The Journal of Adhesion, 79(8-9), 867-873.
- Zhou, H., Liu, H. Y., Zhou, H., Zhang, Y., Gao, X., & Mai, Y. W. (2016). On adhesive properties of nano-silica/epoxy bonded single-lap joints. Materials & Design, 95, 212-218.
- Hsieh, T. H., Kinloch, A. J., Taylor, A. C., & Sprenger, S. (2011). The effect of silica nano-particles and carbon nanotubes on the toughness of a thermosetting epoxy polymer. Journal of Applied Polymer Science, 119(4), 2135-2142.
- Mody, V. V., Siwale, R., Singh, A., & Mody, H. R. (2010). Introduction to metallic nano-particles. Journal of Pharmacy and Bioallied Sciences, 2(4), 282.
- Al-Harthi, M., Kahraman, R., Yilbas, B., Sunar, M., & Aleem, B. A. (2004). Influence of water immersion on the single-lap shear strength of aluminum joints bonded with aluminum-powder-filled epoxy adhesive. Journal of adhesion science and technology, 18(15-16), 1699-1710.
- Gilbert, E. N., Hayes, B. S., & Seferis, J. C. (2003). Nano alumina modified epoxy based film adhesives. Polymer Engineering & Science, 43(5), 1096-1104.
- Hussain, Z., Tahir, S., Mahmood, K., ALIa, A., ARSHAD, M., Ikram, S., ... &Uddassir, Y. (2020). Synthesis and Characterization of Silver Nano-particles With Epoxy Resin Composites. Digest Journal of Nanomaterials and Biostructures, 15(3), 873-883.
- NecatiAtaberk The effect of Cu nano-particle adding on to epoxy-based adhesive and adhesion properties. Sci Rep 10, 11038 (2020). https://doi.org/10.1038/s41598-020-68162-4
- Prolongo, S. G., Burón, M., Gude, M. R., Chaos-Morán, R., Campo, M., &Ureña, A. (2008). Effects of dispersion techniques of carbon nano-fibers on the thermo-physical properties of epoxy nanocomposites. Composites Science and Technology, 68(13), 2722-2730.
- Xu, L. R., Li, L., Lukehart, C. M., & Kuai, H. (2007). Mechanical characterization of nano-fiber-reinforced composite adhesives. Journal of nanoscience and nanotechnology, 7(7), 2546-2548.
- Prolongo, S. G., Gude, M. R., Sanchez, J., &Ureña, A. (2009). Nanoreinforced epoxy adhesives for aerospace industry. The Journal of Adhesion, 85(4-5), 180-199.
- Gibson, T., Rice, B., Ragland, W., Silverman, E. M., Peng, H., Strong, K. L., & Moon, D. (2005). Formulation and evaluation of carbon nano-fiber-based conductive adhesives. SAMPE-2005.
- Rafiee, M. A., Rafiee, J., Wang, Z., Song, H., Yu, Z. Z., & Koratkar, N. (2009). Enhanced mechanical properties of nanocomposites at low graphene content. ACS nano, 3(12), 3884-3890.
- Rafiee, M. A., Rafiee, J., Srivastava, I., Wang, Z., Song, H., Yu, Z. Z., &Koratkar, N. (2010). Fracture and fatigue in graphene nanocomposites. small, 6(2), 179-183.
- Chandrasekaran, S., Sato, N., Tölle, F., Mülhaupt, R., Fiedler, B., & Schulte, K. (2014). Fracture toughness and failure mechanism of graphene based epoxy composites. Composites Science and Technology, 97, 90-99.
- Ahmadi-Moghadam, B., Sharafimasooleh, M., Shadlou, S., & Taheri, F. (2015). Effect of functionalization of graphene nanoplatelets on the mechanical response of graphene/epoxy composites. Materials & Design (1980-2015), 66, 142-149.
- Walker, L. S., Marotto, V. R., Rafiee, M. A., Koratkar, N., & Corral, E. L. (2011). Toughening in graphene ceramic composites. ACS nano, 5(4), 3182-3190.
- Zeng, Y., Liu, H. Y., Mai, Y. W., & Du, X. S. (2012). Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles. Composites Part B: Engineering, 43(1), 90-94.
- Hsieh, T. H., Kinloch, A. J., Masania, K., Sohn Lee, J., Taylor, A. C., & Sprenger, S. (2010). The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nano-particles. Journal of materials science, 45(5), 1193-1210.
- Kelkar, A. D., Mohan, R., Bolick, R., &Shendokar, S. (2010). Effect of nano-particles and nano-fibers on Mode I fracture toughness of fiber glass reinforced polymeric matrix composites. Materials Science and Engineering: B, 168(1-3), 85-89.
- Zhou, H., Du, X., Liu, H. Y., Zhou, H., Zhang, Y., & Mai, Y. W. (2017). Delamination toughening of carbon fiber/epoxy laminates by hierarchical carbon nanotube-short carbon fiber interleaves. Composites Science and Technology, 140, 46-53.
- Yan, N., Xia, H., Zhan, Y., & Fei, G. (2013). New Insights into Fatigue Crack Growth in Graphene Filled Natural Rubber Composites by Microfocus Hard X Ray Beamline Radiation. Macromolecular Materials and Engineering, 298(1), 38-44.