Open Access Open Access  Restricted Access Subscription Access

New single VDCC Based Electronically Adjustable FDNR using Grounded Capacitances


Affiliations
1 Department of Electronics and Communication Engineering, National Institute of Technology Jamshedpur 831 014, India
2 Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi 110 025, India
3 Department of Electronics and Communication Engineering, Inderprastha Engineering College, Ghaziabad 201 010, India
4 School of Engineering, King Mongkut's Instituteof Technology Ladkrabang, Bangkok 10520,

A FDNR (Frequency Dependent Negative Resistance) simulator has been presented, which uses single Voltage Differencing Current Conveyor (VDCC) along with two grounded capacitances to realize the pure FDNR function. The proposed FDNR simulator places itself as one of the most compact circuit architecture present in the available literature. It is a resistor-less realization and finds no requirement of any active/passive component/parameter matching to realize the FDNR behaviour. The presented analysis shows that the proposed circuit remains always stable under the effect of parasitics irrespective of any values of circuit parameters, which is not witnessed in many previously reported FDNRs. The usability of realized synthetic FDNR has been checked through validation of developed higher-order CDR filters by using the proposed FDNR. To verify the designed circuits, the presented configurations have been simulated under the PSPICE simulation environment. The experimental results are shown for the commercial ICs (AD844 and CA3080) based physical realization of described FDNR.
User
Notifications
Font Size

Abstract Views: 74




  • New single VDCC Based Electronically Adjustable FDNR using Grounded Capacitances

Abstract Views: 74  | 

Authors

Mayank Srivastava
Department of Electronics and Communication Engineering, National Institute of Technology Jamshedpur 831 014, India
Kapil Bhardwaj
Department of Electronics and Communication Engineering, National Institute of Technology Jamshedpur 831 014, India
Dinesh Prasad
Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi 110 025, India
Ramendra Singh
Department of Electronics and Communication Engineering, Inderprastha Engineering College, Ghaziabad 201 010, India
Worapong Tangsrirat
School of Engineering, King Mongkut's Instituteof Technology Ladkrabang, Bangkok 10520,

Abstract


A FDNR (Frequency Dependent Negative Resistance) simulator has been presented, which uses single Voltage Differencing Current Conveyor (VDCC) along with two grounded capacitances to realize the pure FDNR function. The proposed FDNR simulator places itself as one of the most compact circuit architecture present in the available literature. It is a resistor-less realization and finds no requirement of any active/passive component/parameter matching to realize the FDNR behaviour. The presented analysis shows that the proposed circuit remains always stable under the effect of parasitics irrespective of any values of circuit parameters, which is not witnessed in many previously reported FDNRs. The usability of realized synthetic FDNR has been checked through validation of developed higher-order CDR filters by using the proposed FDNR. To verify the designed circuits, the presented configurations have been simulated under the PSPICE simulation environment. The experimental results are shown for the commercial ICs (AD844 and CA3080) based physical realization of described FDNR.