Indian Journal of Pure and Applied Physics

Open Access Open Access  Restricted Access Subscription Access

Mechanical Testing of Hybrid LM30 Metal Matrix Composite Fabricated through Stir Casting Route


Affiliations
1 Department of Mechanical Engineering, National Institute of Technology, Delhi, 110 040, India
2 Academy of Scientific and Innovative Research, Ghaziabad, 201 002, India
 

Metal Matrix Composites (MMCs) are one of the strongest contenders for the application that demands excellent mechanical and physical properties. Aluminium Metal Matrix Composites (Al MMCs) are reinforced materials with improved mechanical and physical properties as compared to the base material. Composite material made through the stir casting process possesses higher elastic modulus, wear resistance, strength, and fatigue resistance. In the present research work, LM30 alloy is chosen as a matrix material and is reinforced with Zircon Dioxide (ZrO2), Rice Husk Ash (RHA), and Tungsten Carbide (W.C.). A stir casting setup is used to fabricate the three different composites. Composite A, Composite B, and Composite C have the composition of (LM30/5%WC/5%ZrO2/10%RSH), (LM30/10%WC/5%ZrO2/5RSH), (LM30/5%WC/10%ZrO2-/5% RHA), respectively. Further, mechanical testing, which includes tensile, compressive, hardness, and Charpy impact tests, has been conducted. It has been found that Composite B possesses the highest hardness, maximum tensile, and compressive strength among all three composite materials.

Keywords

Stir Casting, LN30 Metal Matrix Composite, Tensile Test, Compressive Test, Hardness, Charpy Test.
User
Notifications
Font Size

  • Thangarasu A, Murugan N, Dinahara I & Vijay S J, Indian Acad Sci, 37 (2012) 579.

  • Asuquo L O, Bassey E N & Ihoms A P, J Mech Indus Res, 1 (2013) 27.

  • Mallikarjuna G B, Rao K V S & Jaypraksh R H, Int J Mech Eng Robot Res, 1 (2012).

  • Katelyn H, Unlu N, Goller G, Öveçoğlua M L & Henein H, Comp Part A: Appl Sci Manuf, 42 (2011) 812.

  • Zachary A & Mohsen O S, Ceram Int J, 38 (2012) 4263.

  • Mandal D & Viswanathan S, Mater Character, 86, (2013) 21.

  • Vencl A, Bobic I, Arostegue S, Bobic B, Marinkovic A & Babic M, J Alloys Compd, 506 (2010) 631.

  • Rehman, Das S & Dixit D, Tribol Int J, 51 (2012) 36.

  • Wei J N, Cheng H F, Zhang Y F, Han F S, Zhou Z C & Shui J P, Mater Sci Eng, 325 (2002) 444.

  • Before O, Long S, Cayron C, Kuebler J & Buffat P A, Comp Sci Technol, 67 (2007) 737.

  • Gu F & Aguilar M, Comp Sci Technol, 64 (2004) 1959.

  • Huber T, Degischer H P, Lefranc G & Schmitt T, Comp Sci Technol, 66 (2006) 2206.

  • Uyyuru R K, Surappa M K & Brusethaug S, Tribol Int J, 40 (2007) 365.

  • Ahlatci H, Kocer T, Candan E & Huseyin C, Tribol Int J, 39 (2016) 213.

  • Gu J, Zhang X, Gu M, Gu M & Wang X, J Alloys Compd, 372 (2004) 304.

  • Gui M & Kang S B, Mater Lett, 51 (2001) 396.

  • Kaynak C & Boyle S, Mater Des, 27 (2006) 776.

  • Singh I B, Singh M, Das S & Gupta A K, Indian J Chem Technol, 19 (2012) 385.

  • Gandhi B K, Borse S V, Wear, 257 (2004) 73.

  • Polanský R, Kadlec P, Slepička P, Kolská Z & Švorčík V, Polym Testing, 78 (2019) 105993,

  • Das S & Prasad S V, Wear, 33 (1989) 173.

  • Singh R K, Telang A & Das S, Trans Nonferrous Met Soc, 30 (2020) 65.

  • Zamani R, Mirzadeh H & Emmy M, Mater Sci Eng A, 726 (2018) 10.

  • Rajak D K, Kumaraswamidhas L A, Das S, Kumaran S S, J Alloys Compd, 656 (2016) 218.

  • Sekhar R & Singh T P, J Mater Res Technol, 4 (2015) 197.

  • Sharma S, Nanda T & Pandey O P, Wear, 426 (2019) 27.

  • Sathish T, Saravanan S & Vijayan V, Mater Res Innovat, 24 (2020).

  • Akbar H I, Surojo E, Ariawan D & Prabowo A R, Res Eng, 6 (2020).


Abstract Views: 131

PDF Views: 97




  • Mechanical Testing of Hybrid LM30 Metal Matrix Composite Fabricated through Stir Casting Route

Abstract Views: 131  |  PDF Views: 97

Authors

Vivek Joshi
Department of Mechanical Engineering, National Institute of Technology, Delhi, 110 040, India
Leeladhar Nagdeve
Department of Mechanical Engineering, National Institute of Technology, Delhi, 110 040, India
Girija Moona
Academy of Scientific and Innovative Research, Ghaziabad, 201 002, India
Harish Kumar
Department of Mechanical Engineering, National Institute of Technology, Delhi, 110 040, India

Abstract


Metal Matrix Composites (MMCs) are one of the strongest contenders for the application that demands excellent mechanical and physical properties. Aluminium Metal Matrix Composites (Al MMCs) are reinforced materials with improved mechanical and physical properties as compared to the base material. Composite material made through the stir casting process possesses higher elastic modulus, wear resistance, strength, and fatigue resistance. In the present research work, LM30 alloy is chosen as a matrix material and is reinforced with Zircon Dioxide (ZrO2), Rice Husk Ash (RHA), and Tungsten Carbide (W.C.). A stir casting setup is used to fabricate the three different composites. Composite A, Composite B, and Composite C have the composition of (LM30/5%WC/5%ZrO2/10%RSH), (LM30/10%WC/5%ZrO2/5RSH), (LM30/5%WC/10%ZrO2-/5% RHA), respectively. Further, mechanical testing, which includes tensile, compressive, hardness, and Charpy impact tests, has been conducted. It has been found that Composite B possesses the highest hardness, maximum tensile, and compressive strength among all three composite materials.

Keywords


Stir Casting, LN30 Metal Matrix Composite, Tensile Test, Compressive Test, Hardness, Charpy Test.

References