Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Development of Supervisory Control and Data Acquisition System for India’s First High Temperature Superconducting Cable Testing


Affiliations
1 Indian Institute of Technology Kharagpur, Kharagpur - 721302, West Bengal, India
2 SuperQ Technologies India Pvt. Ltd., Bengaluru - 560045, Karnataka, India
     

   Subscribe/Renew Journal


High Temperature Superconductor (HTS) based power cable is a technological marvel which can transmit bulk power over large distances without any joule heating as compared to a conventional copper cable, owing to its zero DC resistance in superconducting state. However, to maintain this superconducting state, the cable must be at a temperature below its critical temperature under self-field. Commonly used HTS material includes BSCCO (Tc = 110 K) and YBCO (Tc = 93 K) and thus, requires cryogenic liquid nitrogen (77 K) for attaining superconductivity. Further, the voltage drops across the various joints such as joint box and current leads in the termination unit must be monitored to ensure optimal operation of the cable. This demands for sophisticated instrumentation operating under extreme low cryogenic temperatures for safe operation, performance monitoring, cryogenic measurements, and control of the HTS power cable cryogenic process. This paper presents the instrumentation scheme followed for testing India’s first 6-meter HTS power cable. The instrumentation scheme involves housing of the various temperature sensors and location of voltage tapping, current measurement, cryogen flow measurements, operation of control valves, operation and measurement of high vacuum system, stray field measurement, insulation resistance measurement and dielectric measurements for cable are the important parameters for the successful operation of HTS power cable. To perform data logging NI-DAQ and LabVIEW software was used to develop in-house Supervisory Control and Data Acquisition (SCADA) system. This paper discusses intrinsic aspects of complete instrumentation and developed SCADA system for HTS power cable

Keywords

Cryogenic Instrumentation, HTS Cable, LabVIEW, SCADA, Sensors.
User
Subscription Login to verify subscription
Notifications
Font Size

  • www.electrical-engineering-portal.com [Internet]. 2013 Aug. [cited 2021 Sep 28]. Available from: Available: https:// electrical-engineering-portal.com/total-losses-in-power- distribution-and-transmission-lines-1
  • www.cnbctv18.com [Internet]. 2018 Jul.. [cited 2021 Sep 28]. Available from: https://www.cnbctv18.com/market/ data/around-22-of-electricity-produced-in-india-is-lostin- distribution-188541.htm
  • www.economictimes.indiatimes.com [Internet]. 2021 Jan. [cited 2021 Sep 28]. Available from: https://economictimes. indiatimes.com/industry/energy/power/ economic-survey-flags-high-td-losses-in-power-sector/ articleshow/80585965.cms?from=mdr
  • Xiao XY, Liu Y, Jin JX, Li CS, Xu FW. Hts applied to power system: Benefits and potential analysis for energy conservation and emission reduction. IEEE Transactions on Applied Superconductivity. 2016, 26(7):1–9. https://doi.org/10.1109/TASC.2016.2594800 DOI: https://doi.org/10.1109/TASC.2016.2594800
  • Wesche R, Anghel A, Jakob B, Pasztor G, Schindler R, Vécsey G. Design of superconducting power cables. Cryogenics. 1999; 39:767–75. https://doi.org/10.1016/S0011-2275(99)00098-3 DOI: https://doi.org/10.1016/S0011-2275(99)00098-3
  • Sudheer T, Sarkar M, Gour AS, Rao VV, Rao BN.Development and testing of a High Temperature Superconducting (HTS) cable for smart grid applications; 2017. DOI: https://doi.org/10.1109/CATCON.2017.8280211
  • Malozemoff P, Yuan J, Rey CM. High-temperature superconducting AC cables for power grid applications. In Superconductors in the Power Grid, Christopher Rey (editor), Woodhead Publishing, Elsevier Ltd.; 2015. p. 261–80. https://doi.org/10.1016/B978-1-78242-029-3.00005-4 DOI: https://doi.org/10.1016/B978-1-78242-029-3.00005-4
  • Yang J, Zhang Z, Yin X, Tang Y, Li J. The development of protection and monitoring system for high temperature superconducting cable. 39th International Universities Power Engineering Conference, 2004. UPEC 2004; 2004. p. 709–12.
  • Yang J, Zhang Z, Yin X. Development of a new protection device for high temperature superconducting power cable. 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century; 2008. p. 1–5. https://doi.org/10.1109/PES.2008.4596449 DOI: https://doi.org/10.1109/PES.2008.4596449
  • Murthy MVK, Murthy SS, Srinivasan K, Kanniah M. Cool-down studies on vacuum insulated cryogenic transfer lines. Cryogenics. 1976; 16(7):409–12. https://doi. org/10.1016/0011-2275(76)90053-9 DOI: https://doi.org/10.1016/0011-2275(76)90053-9
  • Chen et al. Sub-cooled liquid nitrogen test system for cooling HTS synchronous motor. IEEE Transactions on Applied Superconductivity. 2011 Jun; 22(3). https://doi. org/10.1109/TASC.2011.2174558 DOI: https://doi.org/10.1109/TASC.2011.2174558
  • De Souza I, Sarkar, A, Anand A, Sarkar M, Kumar JS, Singh A. Calibration of a Cryogenic Turbine based Volumetric Flow Meter (CTVFM) using sub-cooled liquid nitrogen and solution for its practical issues. IEEE Sensors 21. https://doi.org/10.1109/JSEN.2021.3065309 DOI: https://doi.org/10.1109/JSEN.2021.3065309
  • Bernier S, Parpal J-L, David E, Jean D, Lalancette D. Dependence of the dielectric properties of polyethylene insulation subject to water ingress with and without electrical aging. 2009 IEEE Electrical Insulation Conference; 2009. https://doi.org/10.1109/EIC.2009.5166351 DOI: https://doi.org/10.1109/EIC.2009.5166351
  • Zong X, Han Y, Zhang J, Yang M, Ma T. Thermo-insulation characteristics of PPLP used for superconducting cable. IOP Conference Series: Materials Science and Engineering. 2020. https://doi.org/10.1088/1757-899X/768/6/062099 DOI: https://doi.org/10.1088/1757-899X/768/6/062099
  • www.rockwin.com. [Internet]. Aug 2020. [cited 2020 Sep 9]. Available from: http://rockwin.com/flow-inline.htm .
  • www.ni.com [Internet]. Mar 2015. [cited 2021 Sep 20]. Available from: https://www.ni.com/pdf/manuals/ 374067a_02.pdf
  • www.ni.com [Internet]. Sep 2021. [cited 2021 Sep 20]. Available from: https://www.ni.com/pdf/manuals/ 375206b_02.pdf
  • www.ni.com [Internet]. Mar 2021. [cited 2021 Sep 20]. Available from: https://www.ni.com/pdf/manuals/ 375905a_02.pdf
  • Gour AS, Thadela S, Rao VV. Cold electronics based 128 Temperature Sensor Interface with 14 leads for testing of High Tc superconducting cable. Progress in Superconductivity and Cryogenics. 2018; 20(1):11–14.

Abstract Views: 141

PDF Views: 0




  • Development of Supervisory Control and Data Acquisition System for India’s First High Temperature Superconducting Cable Testing

Abstract Views: 141  |  PDF Views: 0

Authors

Isaac de Souza
Indian Institute of Technology Kharagpur, Kharagpur - 721302, West Bengal, India
Abhik Sarkar
SuperQ Technologies India Pvt. Ltd., Bengaluru - 560045, Karnataka, India
Maalika Sarkar
Indian Institute of Technology Kharagpur, Kharagpur - 721302, West Bengal, India
Abhay Singh Gour
Indian Institute of Technology Kharagpur, Kharagpur - 721302, West Bengal, India
Vutukuru Vasudeva Rao
Indian Institute of Technology Kharagpur, Kharagpur - 721302, West Bengal, India

Abstract


High Temperature Superconductor (HTS) based power cable is a technological marvel which can transmit bulk power over large distances without any joule heating as compared to a conventional copper cable, owing to its zero DC resistance in superconducting state. However, to maintain this superconducting state, the cable must be at a temperature below its critical temperature under self-field. Commonly used HTS material includes BSCCO (Tc = 110 K) and YBCO (Tc = 93 K) and thus, requires cryogenic liquid nitrogen (77 K) for attaining superconductivity. Further, the voltage drops across the various joints such as joint box and current leads in the termination unit must be monitored to ensure optimal operation of the cable. This demands for sophisticated instrumentation operating under extreme low cryogenic temperatures for safe operation, performance monitoring, cryogenic measurements, and control of the HTS power cable cryogenic process. This paper presents the instrumentation scheme followed for testing India’s first 6-meter HTS power cable. The instrumentation scheme involves housing of the various temperature sensors and location of voltage tapping, current measurement, cryogen flow measurements, operation of control valves, operation and measurement of high vacuum system, stray field measurement, insulation resistance measurement and dielectric measurements for cable are the important parameters for the successful operation of HTS power cable. To perform data logging NI-DAQ and LabVIEW software was used to develop in-house Supervisory Control and Data Acquisition (SCADA) system. This paper discusses intrinsic aspects of complete instrumentation and developed SCADA system for HTS power cable

Keywords


Cryogenic Instrumentation, HTS Cable, LabVIEW, SCADA, Sensors.

References





DOI: https://doi.org/10.33686/prj.v18i1.222159