Current Science

Open Access Open Access  Restricted Access Subscription Access

Importance and Sensitivity of Variables Defining Throw and Flyrock in Surface Blasting by Artificial Neural Network Method


Affiliations
1 CSIR-Central Institute of Mining and Fuel Research, Regional Centre Unit-I, MECL Complex, Seminary Hills, Nagpur 440 006, India
2 Department of Mining Engineering, Indian Institute of Technology (ISM), Dhanbad 826 015, India
 

Rock breakage by explosives is followed by throw or heaving the broken material and occasional flyrock. Heaving is a desired feature of blasting for efficient mucking. However, flyrock is a rock fragment that travels beyond the designated distance from a blast in surface mines, and poses a threat to adjacent habitats. Here, we decipher the importance and sensitivity of the variables and factors used to establish the predictive regime of throw with more emphasis on flyrock. The data collected were modelled using artificial neural network approach. The importance and sensitivity of variables and factors were delineated so that they are in tune with the rationale of the outcome of the blast. A combinatory approach was devised to arrive at minimal variables and factors to reduce the statistical redundancy, and to propose a rational predictive regime for throw and flyrock in surface mines.

Keywords

Artificial Neural Network, Blasting, Flyrock, Throw, Surface Mines.
User
Notifications
Font Size

  • Raina, A. K., Murthy, V. M. S. R. and Soni, A. K., Flyrock in bench blasting: a comprehensive review. Bull. Eng. Geol. Environ., 2014, 73(4), 1199–1209.

  • Bajpayee, T., Rehak, T. R., Mowrey, G. and Ingram, D., A summary of fatal accidents due to flyrock and lack of blast area security in surface mining, 1989 to 1999. Proceedings of the 28th Annual Conference on Explosives and Blasting Technique, ISEE, 10–13 February 2002, Las Vegas, 2, pp. 105–118.

  • Singh, D. P. and Sastry, V. R., Rock fragmentation by blasting influence of joint filling material. J. Exp. Eng., 1986, 3(5), 18–27.

  • Raina, A. K., Murthy, V. M. S. R. and Soni, A. K., Flyrock in surface mine blasting: understanding the basics to develop a predictive regime. Curr. Sci., 2015, 108(4), 660–665.

  • Schneider, L., Back to basics: flyrock (Part 1 – Safety and Causes). J. Exp. Eng., 1996, 13(9), 18–20.

  • Kricak, L., Kecojevic, V., Negovanovic, M., Jankovic, I. and Zekovic, D., Environmental and safety accidents related to blasting operation. Am. J. Environ. Sci., 2012, 8(4), 360–365.

  • Trivedi, R., Singh, T. N. and Raina, A. K., Prediction of blastinduced flyrock in Indian limestone mines using neural networks. J. Rock Mech. Geotech. Eng., 2014, 6(5), 447–454.

  • Faradonbeh, R. S., Armaghani, D. J. and Monjezi, M., Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique. Bull. Eng. Geol. Environ., 2016, 75(3), 993–1006.

  • Fletcher, L. R. and D’Andrea, D. V., Control of flyrock in blasting, Proceedings of the 12th Annual Conference on Explosives and Blasting Technique, ISEE, 9–14 February 1986, Cleveland, pp. 167–175.

  • Gupta, R. N., Surface blasting and its impact on environment. In Impact of Mining on Environment (eds Trivedy, R. K. and Sinha, M. P.), Ashish Publishing House, New Delhi, pp. 23–24.

  • Workman, J. L. and Calder, P. N., Flyrock prediction and control in surface mine blasting, 1994; http://docs.isee.org/ISEE/Support/Proceed/General/94Gen/9406g.pdf

  • Davies, P. A., Risk based approach to setting of flyrock danger zones for blasting sites, transactions of the institute of mines and metals, May–August 1995, pp. 96–100.

  • Adhikari, G. R., Studies on flyrock at limestone quarries. Rock Mech. Rock Eng., 1999, 32(4), 291–301.

  • Richards, A. and Moore, A., Flyrock control – by chance or design. Proceedings of the 30th Annual Conference on Explosives and Blasting Technique, ISEE, 2004, vol. 1, pp. 335–348.

  • Kecojevic, V. and Radomsky, M., Flyrock phenomena and area security in blasting-related accidents. Saf. Sci., 2005, 43(9), 739–750.

  • Little, T. N., Flyrock risk. Proceedings of EXPLO Conference, Wollongong, NSW, 3–4 September 2007, pp. 35–43.

  • Verakis, H. and Lobb, T., Flyrock revisited an ever present danger in mine blasting, 2007; http://docs.isee.org/ISEE/Support/Proceed/General/ 07GENV1/ 07v109g.pdf

  • Little, T. N. and Blair, D. P., Mechanistic Monte Carlo models for analysis of flyrock risk. Rock Fragmentation by Blasting (ed. Sanchidrián), Taylor & Francis, 2010, pp. 641–647.

  • Amini, H., Gholami, R., Monjezi, M., Torabi, S. R. and Zadhesh, J., Evaluation of flyrock phenomenon due to blasting operation by support vector machine. Neural Comput. Appl., 2011, 21(8), 2077–2085.

  • Ghasemi, E., Sari, M. and Ataei, M., Development of an empirical model for predicting the effects of controllable blasting parameters on flyrock distance in surface mines. Int. J. Rock Mech. Min. Sci., 2012, 52, 163–170.

  • Mishra, A. K. and Mallick, D. K., Analysis of blasting related accidents with emphasis on flyrock and its mitigation in surface mines. Rock Fragmentation by Blasting (eds Singh, P. K. and Sinha, A.), Taylor and Francis, London, 2013, pp. 555–561.

  • Lundborg, N., The hazards of fly rock in rock blasting. Swedish Detonic research foundation, Report DS, 1974, p. 12.

  • Roth, J. A., A model for the determination of flyrock range as a function of shot condition, US Department of Commerce, NTIS Report No. PB81222358, 1979, p. 61.

  • St George, J. D. and Gibson, M. F. L., Estimation of flyrock travel distances: a probabilistic approach, AusIMM EXPLO 2001 Conference, Hunter Valley, 2001, pp. 409–415.

  • McKenzie, C. K., Flyrock Range and Fragment Size Prediction, 2009; http://docs.isee.org/ISEE/Support/Proceed/General/09GENV2/09v206g.pdf

  • Monjezi, M., Bahrami, A. and Varjani, A. Y., Simultaneous prediction of fragmentation and flyrock in blasting operation using artificial neural networks. Int. J. Rock Mech. Min. Sci., 2010, 47, 476–480.

  • Stojadinovic, S., Pantovic, R. and Zikic, M., Prediction of flyrock trajectories for forensic applications using ballistic flight equations. Int. J. Rock Mech. Min. Sci., 2011, 48, 1086–1094.

  • Rezaei, M., Monjezi, M. and Varjani, Y. A., Development of a fuzzy model to predict flyrock in surface mining. Saf. Sci., 2011, 49, 298–305.

  • Ghasemi, E., Amini, H., Ataei, M. and Khalokakaei, R., Application of artificial intelligence techniques for predicting the flyrock distance caused by blasting operation. Arab J. Geosci., 2012; doi:10.1007/s12517-012-0703-6,10.

  • Monjezi, M., Dehghani, H., Singh, T. N., Sayadi, A. R. and Gholinejad, A., Application of TOPSIS method for selecting the most appropriate blast design. Arab J. Geosci., 2012, 5, 95–101.

  • Khandelwal, M. and Monjezi, M., Prediction of flyrock in open pit blasting operation using machine learning method. Int. J. Min. Sci. Technol., 2013, 23(3), 313–316.

  • Lilly, P. A., An empirical method of assessing rock mass blastability. Proceedings AusIMM/IE, Australian Newman Combined Group Large Open Pit Mines Conf., 1986, pp. 41–44, 89–92.


Abstract Views: 358

PDF Views: 143




  • Importance and Sensitivity of Variables Defining Throw and Flyrock in Surface Blasting by Artificial Neural Network Method

Abstract Views: 358  |  PDF Views: 143

Authors

A. K. Raina
CSIR-Central Institute of Mining and Fuel Research, Regional Centre Unit-I, MECL Complex, Seminary Hills, Nagpur 440 006, India
V. M. S. R. Murthy
Department of Mining Engineering, Indian Institute of Technology (ISM), Dhanbad 826 015, India

Abstract


Rock breakage by explosives is followed by throw or heaving the broken material and occasional flyrock. Heaving is a desired feature of blasting for efficient mucking. However, flyrock is a rock fragment that travels beyond the designated distance from a blast in surface mines, and poses a threat to adjacent habitats. Here, we decipher the importance and sensitivity of the variables and factors used to establish the predictive regime of throw with more emphasis on flyrock. The data collected were modelled using artificial neural network approach. The importance and sensitivity of variables and factors were delineated so that they are in tune with the rationale of the outcome of the blast. A combinatory approach was devised to arrive at minimal variables and factors to reduce the statistical redundancy, and to propose a rational predictive regime for throw and flyrock in surface mines.

Keywords


Artificial Neural Network, Blasting, Flyrock, Throw, Surface Mines.

References





DOI: https://doi.org/10.18520/cs%2Fv111%2Fi9%2F1524-1531