Current Science

Open Access Open Access  Restricted Access Subscription Access

Prediction of Total Load Transport of an Indian Alluvial River to Estimate Unmeasured Bed Load through an Alternative Approach


Affiliations
1 Civil Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat 395 007, India
 

Predicting sediment transport in a natural stream is essential to adequately design different hydraulic structures like bridge piers, dam, causeway, etc., having a long service life. The prediction of sediment transport is a challenging task keeping in view the dynamic conditions of stream flow, which in turn depends upon a number of continuously and randomly changing flow parameters, channel parameters and fluid properties and thus no uniform mathematical or physical relationship can be adopted for prediction of sediment transport. The available empirical solutions, based mostly on regression, vary largely from one site condition to other. In India the bed load data is rarely measured and thus the availability of total load data for Indian alluvial river is virtually non existent and therefore a true empirical relationship cannot be developed for predicting total load in Indian streams. The present study aims to bridge this gap through a three-prong approach to predict the total load of an alluvial river (Shetrunji River). The unavailable (unmeasured) bed load data is computed using firstly, selected bed load transport equations and secondly, using Maddock’s estimation. These computed total load (computed bed load plus observed suspended load) are compared with the total load transport predicted using Yang’ 1973 and Yang’ 1979 Unit Stream Power (USP) equations. It was found that the best prediction of total load is obtained for Yang’1973 equation, when Shields (1936) bed load formula is used to compute bed load or when bed load is taken as 5% of observed suspended load. This methodology can be applied to predict the total load of rivers with reasonably good accuracy even in the absence of unmeasured bed load.

Keywords

Alluvial Rivers, Bed Load, Empirical Relationship, Sediment Transport, Suspended Load.
User
Notifications
Font Size

  • Garde, R. J. and Ranga Raju, K. G., Mechanics of Sediment Transportation and Alluvial Stream Problems, New Age International (P) Limited, New Delhi, 2000, 3rd edn.

  • Shields, A., Application of similarity principles and turbulence research to bed-load movement. Mitteilungen derPruessischen Versuchsanstalt fuer Wasserbau and Schiffbau, Berlin, 1936, vol. 26, pp. 5–24.

  • Einstein, H. A., The bedload function for sediment transport in open channel flow. US Department of Agriculture Soil Conservation Technical Bulletin, No. 1026, 1950.

  • Bagnold, R. A., An approach to the sediment transport problem from general physics. US Geological Survey, Professional Paper 422-J, 1966.

  • Parker, G., Hydraulic geometry of active gravel rivers. J. Hydraul. Eng., 1979, 105(9), 1185–1201.

  • Swamee, P. K. and Ojha, C. S. P., Bed load and suspended load transport of non-uniform sediments. J. Hydraul. Eng., 1991, 117(6), 774–787.

  • Julien, P. Y., River Mechanics, Cambridge University Press, 2002, p. 434.

  • Recking, A., A simple method for calculating reach-averaged bed load transport. J. Hydraul. Eng., 2013, 139(1); doi:10.1061.

  • Parker, G., Kilingeman, P. C. and Mclean, D. G., Bed load and size distribution in paved gravel-bed streams. J. Hydraul. Div. (ASCE), 1982, 108(4), 544–571.

  • Misri, R. L., Ranga Raju, K. G. and Garde, R. J., Bed load transport of coarse non-uniform sediments. J. Hydraul. Eng., 1984, 110(3), 312–328.

  • Samaga, B. R., Ranga Raju, K. G. and Garde, R. J., Bed load transport of sediment mixtures. J. Hydraul. Eng., 1986, 112(11), 1003–1018.

  • Mittal, M. K., Porey, P. D. and Ranga Raju, K. G., Bed load transport of non-uniform sediments. In Proceedings of the Euromech 262 Colloquium on Sand Transport in Rivers, Estuaries and the Sea, CRC Press, Wallingford, UK, 1990.

  • Bridge, J. S. and Bennett, S. J., A model for the entrainment and transport of sediment grains of mixed sizes, shapes and densities. Water Resour. Res., 1992, 28(2), 337–363.

  • Patel, P. L. and Ranga Raju, K. G., Fraction wise calculation of bed load transport. J. Hydraul. Res., 1996, 34(3), 363–379.

  • Fang, D. and Yu, G. L., Bed load transport in cobble-bed rivers. In Proceedings of International Water Resources Engineering Conference, Memphis, USA, 1998.

  • Blench, T., Mobile-Bed Fluvialogy, A Regime Theory Treatment of Canals and Rivers for Engineers and Hydrologists, The University of Alberta Press, Alberta, Canada, 1969.

  • Kennedy, R. G., Prevention of silting in irrigation canals. Proc. Inst. Civ. Eng., 2015, 119(1895), 281–290.

  • Lacey, G., Stable channel in alluvium. Proc. Inst. Civ. Eng., 2015, 229(1930), 259–292.

  • Shen, H. W. and Hung, C. S., An engineering approach to total bed-material load by regression analysis. In Proceedings of the Sedimentation Symposium, Berkeley, USA, 1972, pp. 14-1–14-17.

  • Karim, M. F. and Kennedy, J. F., Means of coupled velocity and sediment-discharge relationships for rivers. J. Hydraul. Eng., 1990, 116(8), 973–996.

  • Toffaletti, F. B., Definitive computations of sand discharge in rivers. J. Hydraul. Div. (ASCE), 1969, 95(HY I), 225–246.

  • Colby, B. R. and Hembree, C. H., Computation of total sediment discharge, Niobrara River near Cody, Nebraska. US Geological Survey Water Supply, Paper no. 1357, 1955.

  • Ackers, P. and White, W. R., Sediment transport: a new approach and analysis. J. Hydraul. Div. (ASCE), 1973, 99(HY11), 2041–2060.

  • Yang, C. T., Incipient motion and sediment transport. J. Hydraul. Div. (ASCE), 1973, 99(HY10), 1679–1704.

  • Yang, C. T., Unit stream power and sediment transport. J. Hydraul. Div. (ASCE), 1979, 98(HY10), 1805–1826.

  • Yang, C. T., Unit stream power equation for gravel. J. Hydraul. Eng. (ASCE), 1984, 110(12), 1783–1797.

  • Vanoni, V. A., Predicting Sediment Discharge in Alluvial Channels, Water Supply and Management, Pergamon Press, Oxford, UK, 1978, pp. 399–417.

  • Waikhom, S. I., Prajapati, N. H. and Yadav, S. M., Evaluation of unit stream power approach for predicting total load transport rate. In Proceedings, Conference on Hydraulics, Water Resources, Coastal and Environmental Engineering, IIT Roorkee, 2015.

  • Hassanzadeh, H., Faiznia, S., ShafaiBajestan, M. and Motamed, A., Estimate of sediment transport rate at Karkheh River in Iran using selected transport formulas. World Appl. Sci. J., 2011, 13(2), 376–384.

  • Nakato, T., Tests of selected sediment-transport formulas. J. Hydraul. Eng., 1990, 116(3), 362–379.

  • Yang, C. T. and Molinas, A., Sediment transport and unit stream power equation. J. Hydraul. Div. (ASCE), 1982, 108(6), 774–793.

  • Thomas, T., Jaiswal, R. K., Galkate, R. V. and Singh, S., Estimation of revised capacity in Shetrunji Reservoir using remote sensing and GIS. In J. Indian Water Resour. Soc., 2009, 29(3).

  • Maddock, T., In Sediment Engineering, Manuals and Reports on Engineering Practice (ed. Vanoni, V. A.), ASCE, New York, USA, 2006, vol. 54.

  • Nagy, H. M., Watanabe, K. and Hirano, M., Prediction of sediment load concentration in rivers using artificial neural network model. J. Hydraul. Eng., 2002, 128(6), 588–595.

  • Sinnakaudan, S. K., Ab Ghani, A., Ahmad, M. S. S. and Zakaria, N. A., Multiple linear regression model for total bed material load prediction. J. Hydraul. Eng. (ASCE), 2006, 132(5), 521–528.

  • Lane, E. W. and Borland, W. M, Estimating bed load transport, American Geophysical Union, 1951, vol. 32, issue 1, pp. 121–123.

  • Vanoni, V. A. (ed.), Sediment Engineering, Manuals and Reports on Engineering Practice, ASCE, New York, USA, 2006, vol. 54.

  • Yang, C. T., Sediment Transport: Theory and Practice, McGraw Hill Series in Water Resources and Environment, McGraw Hill, New York, USA, 1996.

  • Waikhom, S. I. and Yadav, S. M., Testing of Maddock’s approximate estimation of bed load for rivers. In Proceedings of National Conference on Water Resources and Flood Management, Surat, Gujarat, India, 2016.


Abstract Views: 313

PDF Views: 148




  • Prediction of Total Load Transport of an Indian Alluvial River to Estimate Unmeasured Bed Load through an Alternative Approach

Abstract Views: 313  |  PDF Views: 148

Authors

Sahita I. Waikhom
Civil Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat 395 007, India
S. M. Yadav
Civil Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat 395 007, India

Abstract


Predicting sediment transport in a natural stream is essential to adequately design different hydraulic structures like bridge piers, dam, causeway, etc., having a long service life. The prediction of sediment transport is a challenging task keeping in view the dynamic conditions of stream flow, which in turn depends upon a number of continuously and randomly changing flow parameters, channel parameters and fluid properties and thus no uniform mathematical or physical relationship can be adopted for prediction of sediment transport. The available empirical solutions, based mostly on regression, vary largely from one site condition to other. In India the bed load data is rarely measured and thus the availability of total load data for Indian alluvial river is virtually non existent and therefore a true empirical relationship cannot be developed for predicting total load in Indian streams. The present study aims to bridge this gap through a three-prong approach to predict the total load of an alluvial river (Shetrunji River). The unavailable (unmeasured) bed load data is computed using firstly, selected bed load transport equations and secondly, using Maddock’s estimation. These computed total load (computed bed load plus observed suspended load) are compared with the total load transport predicted using Yang’ 1973 and Yang’ 1979 Unit Stream Power (USP) equations. It was found that the best prediction of total load is obtained for Yang’1973 equation, when Shields (1936) bed load formula is used to compute bed load or when bed load is taken as 5% of observed suspended load. This methodology can be applied to predict the total load of rivers with reasonably good accuracy even in the absence of unmeasured bed load.

Keywords


Alluvial Rivers, Bed Load, Empirical Relationship, Sediment Transport, Suspended Load.

References





DOI: https://doi.org/10.18520/cs%2Fv113%2Fi06%2F1120-1128