Current Science

Open Access Open Access  Restricted Access Subscription Access

Study on Sensitivity Analysis Method of Slope Stability Based on Sweden Arc Method


Affiliations
1 College of Hydraulic and Environmental Engineering, China Three Gorges University, Yichang 443003, China
2 Wudongde Engineering Construction Department of China Three Gorges Construction Management Co, Ltd, Chengdu 610000, China
3 College of Civil and Transportation Engineering, Hohai University, Nanjing 210029, China
 

In this study, an attempt has been made to analyse the impact of different parameters (such as bulk density, cohesive force, internal angle of friction, angle of slip surface and pore water pressure) on the safety factor of a given slope. The analysis was done using the Swedish Arc method. Meanwhile, the sensitivity ratios between different parameters were determined by taking the partial derivatives of non-dimensional parameters. A typical case study with a uniform slope was considered to verify the efficiency of the provided method. The results showed that the change in failure path had a significant impact on the sensitivity ratio of parameters. In the meantime, unstable slopes will have higher value of sensitivity ratio in the shear strength parameters (tan φ and c). The sensitivity analysis method introduced in this article eliminated the crude assumptions made on the conventional approach. The advantage of this analytical method is that both the safety factor and the sensitivity ratio can be computed simultaneously, for slopes with any given slip surface. It is believed that the results will have an indispensible role in understanding and capturing the nature of geotechnical problems.

Keywords

Non-Dimensional, Partial Derivative, Sensitivity Ratio, Sensitivity Analysis.
User
Notifications
Font Size

  • Zhang, W.-G. and Liu, Y., Main factor sensitivity analysis based on response surface model updating of port crane structure. J. Coastal Res., 2015, 73, 166–172.

  • Singh, N. and McFarland, E. W., Leveled cost of energy and sensitivity analysis for the hydrogen-bromine flow battery. J. Power Sources, 2015, 288, 187–198.

  • De Staelen, R. H. and Beddek, K., Sensitivity analysis and variance reduction in a stochastic non-destructive testing problem. Int. J. Comput. Math., 2015, 92(9), 1874–1882.

  • Ma, C. F., Li, X. and Wang, S. G., A global sensitivity analysis of soil parameters associated with back scattering using the advanced integral equation model. IEEE T. Geosci. Remote, 2015, 53(10), 5613–5623.

  • Schattler, H. and Ledzewicz, U., Fields of extremals and sensitivity analysis for multi-input bilinear optimal control problems. Discrete Cont. DYN-A, 2015, 35(9), 4611–4638.

  • Boyaghchi, F. A. and Molaie, H., Sensitivity analysis of exergy destruction in a real combined cycle power plant based on advanced exergy method. Energ. Convers. Manage., 2015, 99, 374–386.

  • Bodjona, K. and Lessard, L., Load sharing in single-lap bonded/bolted composite joints. Part II: global sensitivity analysis. Compos. Struct., 2015, 129, 276–283.

  • Bonstrom, H. and Corotis, R. B., Optimizing portfolio loss reduction using a first-order reliability method sensitivity analysis. Struct. Infrastruct. E, 2015, 11(9), 1190–1198.

  • Park, W., Park, J. and Kim, H. K., Candidate model construction of a cable-stayed bridge using parameterized sensitivity-based finite element model updating. Struct. Infrastruct. E, 2015, 11(9), 1163–1177.

  • Pianosi, F., Sarrazin, F. and Wagener, T., A MATLAB toolbox for global sensitivity analysis. Environ. Modell. Softw., 2015, 70, 80–85.

  • Chastaing, G. and LeGratiet, L., ANOVA Decomposition of conditional Gaussian processes for sensitivity analysis with dependent oinputs. J. Stat. Comput. Sim., 2015, 85(11), 2164–2186.

  • Li, D. Q., Jiang, S. H., Cao, Z. J., Zhou, W., Zhou, C. B. and Zhang, L. M., A multiple response-surface method for slope reliability analysis considering spatial variability of soil properties. Eng. Geol., 2015, 187, 60–72.

  • Wan, L. P., Liu, J., Zhao, Z. Y., Dong, Y. H. and Cheng, Z., Layered sensitivity analysis and weight determination of rock slope stability impacting factors. Water Resour. Hydr. Eng., 2015, 43(3), 59–62.

  • He, B. G., Gao, Q. and Liu, F., Orthogonal analysis and numerical simulation on influential factors of freeway slope stability. Chinese J. Geotech. Eng., 2015, 27(6), 716–719.

  • Toronto Rocscience Inc., Rocscience Slide, Version 6.0 (Toronto).

  • Toronto Rocscience Inc.. Slide Verification Manual[R], Rocscience Inc., Toronto, 2003.


Abstract Views: 406

PDF Views: 119




  • Study on Sensitivity Analysis Method of Slope Stability Based on Sweden Arc Method

Abstract Views: 406  |  PDF Views: 119

Authors

Jing Yu Zhang
College of Hydraulic and Environmental Engineering, China Three Gorges University, Yichang 443003, China
Liang Peng Wan
Wudongde Engineering Construction Department of China Three Gorges Construction Management Co, Ltd, Chengdu 610000, China
Guo Yong Duan
College of Civil and Transportation Engineering, Hohai University, Nanjing 210029, China

Abstract


In this study, an attempt has been made to analyse the impact of different parameters (such as bulk density, cohesive force, internal angle of friction, angle of slip surface and pore water pressure) on the safety factor of a given slope. The analysis was done using the Swedish Arc method. Meanwhile, the sensitivity ratios between different parameters were determined by taking the partial derivatives of non-dimensional parameters. A typical case study with a uniform slope was considered to verify the efficiency of the provided method. The results showed that the change in failure path had a significant impact on the sensitivity ratio of parameters. In the meantime, unstable slopes will have higher value of sensitivity ratio in the shear strength parameters (tan φ and c). The sensitivity analysis method introduced in this article eliminated the crude assumptions made on the conventional approach. The advantage of this analytical method is that both the safety factor and the sensitivity ratio can be computed simultaneously, for slopes with any given slip surface. It is believed that the results will have an indispensible role in understanding and capturing the nature of geotechnical problems.

Keywords


Non-Dimensional, Partial Derivative, Sensitivity Ratio, Sensitivity Analysis.

References





DOI: https://doi.org/10.18520/cs%2Fv113%2Fi11%2F2097-2104