Current Science

Open Access Open Access  Restricted Access Subscription Access

On-The-Go Position Sensing and Controller Predicated Contact-Type Weed Eradicator


Affiliations
1 Biological Systems Engineering, Washington State University, Pullman, WA 99164, United States
2 Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur 721 302, India
3 ICAR-Central Institute of Agricultural Engineering, Bhopal 462 038, India
4 CAR-Central Potato Research Institute, Shimla 171 001, India
 

This article presents a robust contact-type weed eradicator based on position sensing, digital image processing and microcontroller for weed control in row crops. The imaging system determines the weed density between the crop rows using an image analyser developed in Visual Studio Open computer vision platform for use under varying illumination levels. Graphic user interface was developed for parametric adjustments of the image analyser. The image analyser conducts image analysis after image acquisition and the data is sent via computer serial to microcontroller for pulse width modulation controlled chemical release. Solenoid valves are employed for liquid release on sponge rollers. The contact-type technique overcomes losses due to chemical drift and percolation resulting in an efficient application. The machine locomotion sensing is done through an inductive type proximity switch. The developed system was calibrated in laboratory, followed by extensive field tests. The average weeding efficiency reported was 90.30% with lowest plant damage of 5.74% and 7.91% and high yield coefficients of 26.15 g/plant and 581.74 g/plant in two selected crops of groundnut and maize plantation. The technology saved about 79.50% of herbicide marking it as a robust and eco-friendly technology.

Keywords

Contact Application, Graphic User Interface, Image Analyser, Locomotion Sensing, Microcontroller, Weed Density.
User
Notifications
Font Size

  • Mada, D. A. and Medugu, A. I., Study on environmental impact of pesticides application with agricultural sprayers in southern Adamawa state, Nigeria. IOSR J. Engg., 2014, 4(8), 05–11.

  • Christensen, S., Heisel, T. and Walter, M., Patch spraying in cereals. In Proceedings of the Second International Weed Control Congress, Denmark, Copenhagen, 1996, pp. 963–968.

  • Sprague, M. A. and Triplett, G. B. (eds), In No-tillage and Surface-tillage Agriculture, Wiley, New York, 1986, pp. 1–18.

  • Wyse, D. L. and Habstritt, C., A roller herbicide applicator. In Proceedings of Northern Central Weed Control Conference, St Louis, Missouri, 1977, 32, pp. 144–145.

  • Gaultney, L. D., Gibson, H. G., Holt, H. and Krutz, G. W., Rightoffway woody brush control with herbicide roller application. Trans. ASAE, 1984, 27(3), 701–705.

  • Messersmith, C. G. and Lym, R. G., Roller application of picloram for leafy spurge control in pastures. Weed Sci., 1985, 33, 258–262.

  • Cohen, A. and Shaked, S., Carpet recirculating glyphosate applicator for row crops. Phytoparasitica, 1982, 10(4), 278.

  • Mayeux Jr, H. S. and Crane, A. R., Application of herbicides on rangelands with a carpeted roller: control of golden weeds (Isocoma spp.) and false broom weed (Ericameria austrotexana). Weed Sci., 1984, 32, 845–849.

  • Welker, W. V., A hand roller wiper for lawns and gardens. In Proceedings of 39th Annual Meeting of the Northeastern Weed Science Society, USDA-ARS, 1985, p. 259.

  • Tewari, V. K. and Mittra, B. N., Low-cost herbicide applicating machine with weeder attachment (IITWAM-82). In Ninth Conference of the Asian-Pacific Weed Science Society, Metro Manila, Philippines, 1982, pp. 424–427.

  • Tewari, V. K., Kumar, A. A., Nare, B., Satya Prakash and Tyagi, A., Microcontroller based roller contact type herbicide applicator for weed control under row crops. Comput. Electron. Agric., 2014, 104, 40–45.

  • Bulanon, D. M., Kataoka, T., Ota, Y. and Hiroma, T., A segmentation algorithm for the automatic recognition of Fuji apples at harvest. Biosys. Eng., 2002, 83(4), 405–412.

  • Graniatto, P. M., Navone, H. D., Verdes, P. F. and Ceccatto, H. A., Weed seeds identification by machine vision. Comput. Electron. Agric., 2002, 33, 91–103.

  • Carrara, M., Comparetti, A., Febo, P. and Orlando, S., Spatially variable rate herbicide application on durum wheat in Sicily. Biosys. Eng., 2004, 87(4), 387–392.

  • Paice, M. E. R., Miller, P. C. H. and Day, W., Control requirements for spatially selective herbicide sprayers. Comput. Electron. Agric., 1996, 14(2–3), 163–177.

  • Thompson, J. F., Stafford, J. V. and Miller, P. C. H., Potential for automatic weed detection and selective herbicide application. Crop Prot., 1991, 10, 254/259.

  • Tian, L., Development of a sensor-based precision herbicide application system. Comput. Electron. Agric., 2002, 36(2–3), 133–149.

  • Thorp, K. R. and Tian, L. F., Performance study of variable-rate herbicide applications based on remote sensing imagery. Biosys. Eng., 2004, 88(1), 35–47.

  • Giles, D. K. and Comino, J. A., Variable flow control for pressure atomization nozzles. Trans. SAE, J. Comm. Vehicles, 1989, 98(2), 237–249.

  • Han, S., Hendrickson, L. and Ni, B., A variable rate application system for sprayers. In Proceedings of the Fifth International Conference on Precision Agriculture, ASA, CSSA, and SSSA, Madison, WI, USA, 2000.

  • Viswanath, C. S., Handbook of Agriculture, Indian Council of Agricultural Research, New Delhi, India, 2002, pp. 263–295.


Abstract Views: 373

PDF Views: 143




  • On-The-Go Position Sensing and Controller Predicated Contact-Type Weed Eradicator

Abstract Views: 373  |  PDF Views: 143

Authors

Abhilash Kumar Chandel
Biological Systems Engineering, Washington State University, Pullman, WA 99164, United States
V. K. Tewari
Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur 721 302, India
Satya Prakash Kumar
ICAR-Central Institute of Agricultural Engineering, Bhopal 462 038, India
Brajesh Nare
CAR-Central Potato Research Institute, Shimla 171 001, India
Aditya Agarwal
Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur 721 302, India

Abstract


This article presents a robust contact-type weed eradicator based on position sensing, digital image processing and microcontroller for weed control in row crops. The imaging system determines the weed density between the crop rows using an image analyser developed in Visual Studio Open computer vision platform for use under varying illumination levels. Graphic user interface was developed for parametric adjustments of the image analyser. The image analyser conducts image analysis after image acquisition and the data is sent via computer serial to microcontroller for pulse width modulation controlled chemical release. Solenoid valves are employed for liquid release on sponge rollers. The contact-type technique overcomes losses due to chemical drift and percolation resulting in an efficient application. The machine locomotion sensing is done through an inductive type proximity switch. The developed system was calibrated in laboratory, followed by extensive field tests. The average weeding efficiency reported was 90.30% with lowest plant damage of 5.74% and 7.91% and high yield coefficients of 26.15 g/plant and 581.74 g/plant in two selected crops of groundnut and maize plantation. The technology saved about 79.50% of herbicide marking it as a robust and eco-friendly technology.

Keywords


Contact Application, Graphic User Interface, Image Analyser, Locomotion Sensing, Microcontroller, Weed Density.

References





DOI: https://doi.org/10.18520/cs%2Fv114%2Fi07%2F1485-1494