Open Access Open Access  Restricted Access Subscription Access

Dynamic Analysis of Soft Hang-Off Riser in Deep Water, Coupling the Vibration of Lateral and Longitudinal Directions


Affiliations
1 State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Sichuan, Chengdu 610500, China
 

A dynamic analysis model of soft hang-off riser in deep water is developed to analyse the mechanical behaviour of a drilling riser. In this model, the riser is suspended by the tensioner at one end and is free at the other end. The movement of the riser can be considered as a process coupling the vibration of lateral and longitudinal directions. The model is studied using finite element method and verified by the results of ABAQUS and a similar experiment. The riser deformation, bending moment and longitudinal vibration in a well from the South China Sea are analysed and influences of lower marine riser package weight, evacuation and current velocities, desired track of the drilling platform, and length of the hang-off drilling riser on drilling riser deformation are discussed. The results are of significant importance for the practical operation of soft hang-off drilling riser during evacuation.

Keywords

Deep Water, Drilling Riser, Dynamic Analysis, Soft Hang-Off.
User
Notifications
Font Size

  • Xu, L., Zhou, J., Wang, R., Jiang, S. and Sheng, L., Analysis of deep water drilling platform evacuation from imminent typhoons with riser hang-off in South China Sea. China Offshore Oil and Gas, 2015, 27(3), 101–107.
  • Mao, L., Liu, Q., Zhou, S., Wang, G. and Fu, Q., Deep water drilling riser mechanical behaviour analysis considering actual riser string configuration. J. Nat. Gas Sci. Eng., 2016, 33, 240–254.
  • Fan, H., Li, C., Wang, Z., Xu, L., Wang, Y. and Feng, X., Dynamic analysis of a hang-off drilling riser considering internal solitary wave and vessel motion. J. Nat. Gas Sci. Eng., 2017, 37, 512– 522.
  • Steddum, R., The management of long, suspended strings of tubulars from floating drilling vessels. In Offshore Technology Conference, Houston, Texas, 2003.
  • Sheng, L., Xu, L., Zhou, J., Jiang, S. and Li, X., Experience on deep-water drilling riser about hang-off modes in typhoon condition of South China Sea. In Offshore Technology Conference, Kuala Lumpur, Malaysia, 2016.
  • Wu, W., Wang, J., Tian, Z., Fu, S., Liu, Z. and Luo, J., Dynamical analysis on drilling riser evacuated in hard hang-off mode. In International Ocean and Polar Engineering Conference, Busan, South Korea, 2014.
  • Liu, X., Chen, G., Chang, Y., Fu, J. and Ji, J., Weak point and operation analysis of deep-water drilling riser system in typhoon condition. International Society of Offshore and Polar Engineers, San Francisco, USA, 2017.
  • Wang, Y., Cao, J., Sha, Y., Duan, M., Wang, D., Dong, Y. and Zhou, Y., SCR hang-off system selection considerations and criteria. International Society of Offshore and Polar Engineers, Hawaii, USA, 2011.
  • Ambrose, B. D., Grealish, F. and Whooley, K., Soft hangoff method for drilling risers in ultra deep-water. In Offshore Technology Conference, Houston, Texas, 2001.
  • Long, J. R., Steddum, R. and Young, R. D., Analysis of a 6000-ft riser during installation and storm hangoff. In Offshore Technology Conference, Houston, Texas, 1983.
  • Dai, W., Gao, F. and Bai, Y., FEM analysis of deep-water drilling risers under the operability and hang-off working conditions. J. Mar. Sci. Appl., 2009, 8(2), 156–162.
  • Yasukawa, H., Ozaki, M. and Tanabe, A., Tension variation and limiting wave height of a deep sea drilling riser in hang-off mode. J. Jpn Soc. Nav. Archit. Ocean Eng., 2009, 1997(182), 187–198.
  • Burgdorf Jr, O., Evaluation of axial and lateral modal superposition for general 3d drilling riser analysis. In Offshore Technology Conference, Houston, Texas, 1996.
  • Liu, X., Chen, G., Chang, Y., Liu, K., Zhang, L. and Xu, L., Analyses and countermeasures of deep-water drilling riser grounding accidents under typhoon conditions. Pet. Exp. Dev., 2013, 40(6), 791–795.
  • Qi, J., A study on structure dynamics and vortex shedding vibration of drilling risers under hang off mode. Shanghai Jiao Tong University, Shanghai, China, 2015.
  • Wang, J., Duan, M., He, T. and Jing, C., Numerical solutions for nonlinear large deformation behaviour of deep-water steel lazywave riser. Ships Offshore Struct., 2014, 9(6), 655–668.
  • Xing, Y. and Liang, K., Nonlinear vibration analysis of longitudinal– transverse coupled beam. J. Beijing Univ. Aeronaut. Astronaut., 2015, 41(8), 1359–1366.
  • Morison, J. R., The force exerted by surface waves on piles. J. Petrol. Technol., 1950, 189(5), 149–154.
  • Han, S. M. and Benaroya, H., Non-linear coupled transverse and axial vibration of a compliant structure, part 1: formulation and free vibration. J. Sound Vibr., 2000, 237(5), 837–873.
  • Liu, J., Zhao, H., Liu, Q., He, Y., Wang, G. and Wang, C., Dynamic behaviour of a deep-water hard suspension riser under emergency evacuation conditions. Ocean Eng., 2018, 150, 138– 151.
  • Fang, H. C., Dong, S. P., Jin, F. and Xu, X. P., Experiment and study of the drag coefficient for drilling riser. Oil Field Equip., 1987, 15(2), 1–6.
  • Wang, S. Q. and Liang, B. C., Wave Mechanics for Ocean Engineering, Ocean University of China Press, Qindao, China, 2013.
  • Brekke, J., Soles, J., Wishahy, M. and Stahl, M., Drilling riser management for a DP drillship in large, rapidly – Developing sea states in deepwater, Society of Petroleum Engineers, Dallas, Texas, 2004.

Abstract Views: 401

PDF Views: 112




  • Dynamic Analysis of Soft Hang-Off Riser in Deep Water, Coupling the Vibration of Lateral and Longitudinal Directions

Abstract Views: 401  |  PDF Views: 112

Authors

Liangjie Mao
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Sichuan, Chengdu 610500, China
Song Zeng
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Sichuan, Chengdu 610500, China
Qingyou Liu
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Sichuan, Chengdu 610500, China

Abstract


A dynamic analysis model of soft hang-off riser in deep water is developed to analyse the mechanical behaviour of a drilling riser. In this model, the riser is suspended by the tensioner at one end and is free at the other end. The movement of the riser can be considered as a process coupling the vibration of lateral and longitudinal directions. The model is studied using finite element method and verified by the results of ABAQUS and a similar experiment. The riser deformation, bending moment and longitudinal vibration in a well from the South China Sea are analysed and influences of lower marine riser package weight, evacuation and current velocities, desired track of the drilling platform, and length of the hang-off drilling riser on drilling riser deformation are discussed. The results are of significant importance for the practical operation of soft hang-off drilling riser during evacuation.

Keywords


Deep Water, Drilling Riser, Dynamic Analysis, Soft Hang-Off.

References





DOI: https://doi.org/10.18520/cs%2Fv116%2Fi9%2F1533-1543