Current Science

Open Access Open Access  Restricted Access Subscription Access

Improvement on the Characteristics of Transformer Oil using Nanofluids


Affiliations
1 Department of Electrical and Electronics Engineering, Anna University, Regional Campus, Coimbatore 641 046, India
2 Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, India
 

Transformers play an important role in transmission and distribution systems. Even to this day, 75% of high-voltage transformer failure is the outcome of improper dielectric insulation. The reliable operation and ageing characteristics of the transformers mainly depend on the insulation material. Mineral oil has been used as an insulation and coolant for almost a century in power transformers. Due to the development of extra high voltage and to cope with the increasing demand in voltage level, a nanofluids-based transformer oil is proposed here. In this work, nanoparticles such as aluminium oxide, molybdenum disulphide and titanium dioxide are used with transformer oil to analyse the various critical characteristics like dielectric strength, acidity, interfacial tension, viscosity, flash point and fire point of the power transformer. The observed results show that the proposed nanofluids-based transformer oil provides better performance than the normal transformer oil.
User
Notifications
Font Size

  • Liu, M. S., Lin, M. C. C., Huang, I. T. and Wang, C. C., Chem. Eng. Technol., 2006, 29(1), 72–77.

  • Jin, H., Andritsch, T., Tsekmes, I. A., Kochetov, R., Morshuis, P. H. F. and Smit, J. J., IEEE Trans. Dielect. Electr. Insul., 2014, 21(3), 1100–1108.

  • Thabet, A., Allam, M. and Shaaban, S. A., IET Gener., Transm. Distrib., 2017, 12(5), 1171–1176.

  • Oommen, T. V., Claiborne, C. C. and Mullen, J. T., In Proceedings of the Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, Rosemont, IL, USA, 1997, pp. 465–468.

  • Bartley, W. H., In Proceedings of the Weidmann-ACTI 5th Annual Technical Conference on New Diagnostic Concepts for Better Asset Management, Albuquerque, NM, USA, November 2006, pp. 1–7.

  • Okabe, S., Kaneko, S., Kohtoh, M. and Amimoto, T., IEEE Trans. Dielectr. Electr. Insul., 2010, 17(1), 302–311.

  • Choi, S. U. S., In The Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition, San Francisco, USA, ASME, FED 231/MD 66, 1995, pp. 99–105.

  • Joshil, A. and Kumar, S., NDT&E Inter., 2005, 38, 459–461.

  • Rafiq, M., Lv, Y. Z., Zhou, Y., Ma, K. B., Wang, W., Li, C. R. and Wang, Q., Renew. Sust. Energy Rev., 2015, 52, 308–324.

  • Das, S. K., Choi, S., Yu, W. and Pradeep, T., Nanofluids: Science and Technology, John Wiley, 2008, vol. 21, pp. 5–8.

  • Jama, M., Singh, T., Gamaleldin, S. M., Koc, M., Samara, A., Isaifan, R. J. and Atieh, M. A., J. Nanomater., 2016, 1, 1–23.

  • Yu, W. and Xie, H., J. Nanomater., 2012, 5, 17.

  • Das, S. K., Choi, S. U. and Patel, H. E., Heat Transfer Eng., 2006, 27(10), 3–19.

  • Segal, V., Hjorstberg, A., Rabinovich, A., Nattrass, D. and Raj, K., IEEE International Symposium on Electrical Insulation, Arlington, VA, USA, 1998, pp. 619–622.

  • Okabe, S., Kaneko, S., Kohtoh, M. and Amimoto, T., IEEE Trans. Dielectr. Electr. Insul., 2010, 17(1), 302–311.

  • Sumathi, S. and Subburaj, P., Asian J. Res. Soc. Sci. Hum., 2017, 7(2), 678–690.

  • Lee, J. C., Seo, H. S. and Kim, Y. J., Int. J. Therm. Sci., 2012, 62, 29–33.

  • Du, B., Li, J., Wang, F., Yao, W. and Yao, S., J. Nanomater., 2015, 4, 1–9.

  • Segal, V., Rabinovich, A., Nattrass, D., Raj, K. and Nunes, A., J. Magn. Magn. Mater., 2000, 215, 513–515.

  • Kopcansky, P., Tomco, L., Marton, K., Koneracka, M., Potocova, I. and Timko, M., J. Magn. Magn. Mater., 2004, 276, 2377–2378.

  • Chiesa, M. and Das, S. K., Colloids Surf. A, 2009, 335, 88–97.

  • Pfaff, G. and Reynders, P., Chem. Rev., 1999, 99, 1963–1981.

  • Yeh, Y. C., Tseng, T. T. and Chang, D. A., J. Am. Ceram. Soc., 1989, 72, 1472–1475.

  • Awati, P. S., Awate, S. V., Shah, P. P. and Ramaswamy, V., Catal. Commun., 2003, 4, 393–400.

  • Moafi, H. F., Shojaie, A. F. and Zanjanchi, M. A., Appl. Surf. Sci., 2010, 256, 4310–4316.

  • Tsevis, A., Spanos, N., Koutsoukos, P. G., Linde, A. J. and Lykleme, J., J. Chem. Soc., Faraday Trans., 1998, 94, 295–300.

  • Shojaie, A. F. and Loghmani, M. H., Chem. Eng. J., 2010, 157, 263–269.

  • Pourabbas, B. and Jamshidi, B., Chem. Eng. J., 2008, 138(1–3), 55–62.

  • Cotton, A. F., Wilkinson, G., Bochmann, M. and Murillo, C. A., Advanced Inorganic Chemistry, John Wiley, USA, 1999.

  • Choudhary, R., Khurana, D., Kumar, A. and Subudhi, S., J. Exp. Nanosci., 2017, 12(1), 140–151.

  • Yu, W. and Xie, H., J. Nanomater., 2012, 4, 1–17.

  • Wang, X.-Q. and Mujumdar, A. S., Braz. J. Chem. Eng., 2008, 25(4), 631–648.

  • Chiesa, M. and Das, S. K., J. Colloids Surf. A, 2009, 335, 1–3.

  • Martin, D. and Wang, Z. D., IEEE Trans. Dielectr. Electr. Insul., 2008, 15(4), 1044–1050.

  • Dissado, La. and Fothergill, J. C., IEEE Trans. Dielectr. Electr. Insul., 2004, 11(5), 737–738.

  • Timko, M. and Marton, K., Czech. J. Phys., 2004, 54, 654–657.

  • Timko, M., Herchl, F. and Marton, K., In Proceedings of the CSMAG’07 Conference, 2008, vol. 113, no. 1, pp. 569–572.

  • Kopcanský, P., Tomco, L., Marton, K., Koneracka, M., Potocova, I. and Timko, M., J. Magn. Magn. Mater., 2004, 272, 2377–2378.

  • Segal, V., Hjortsberg, A., Rabinovich, A., Nattrass, D. and Raj, K., In Conference Record of the 1998 IEEE International Symposium on Electrical Insulation (Cat. No. 98CH36239), 1998, vol. 2, pp. 619–622.

  • IEC 156, Insulating Liquids – Determination of the Breakdown Voltage at Power Frequency – Test Method, 1995, 2nd edn.

  • Wadhwa, C. L., High Voltage Engineering, New Age International, 2007.

  • Du, Y. F., Lv, Y. Z., Wang, F. C., Li, X. X. and Li, C. R., In Electrical Insulation (ISEI), Conference Record of the 2010 IEEE International Symposium, San Diego, CA, USA, 2010, pp. 1–3.

  • Fallah-Shojaie, A., Tavakoli, A., Ghomashpasand, M. and Hoseinzadeh, S., In 21st Iranian Conference on Electrical Engineering, ICEE, 2013.

  • Pugazhendhi, S. C., In International Conference on High Voltage Engineering and Application, Shanghai, China, 2012, vol. 9, pp. 207–210.

  • Chandini, G. and Karthik, R., In International Conference on Circuits, Power and Computing Technologies, Nagercoil, India, ICCPCT, 2014, pp. 370–376.

  • ASTM D974. Standard test method for determining acidity of oil.

  • ASTM D971. Standard test method for determining inferential tension of oil.

  • ASTM D93. Standard test method for determining flash point of oil.

  • Kumar, T. A., Pradyumna, G. and Jahar, S., J. Environ. Res. Dev., 2012, 7, 768–777.

  • IS 1448 (P-25):1976. Standard for measuring viscosity of oil.


Abstract Views: 374

PDF Views: 158




  • Improvement on the Characteristics of Transformer Oil using Nanofluids

Abstract Views: 374  |  PDF Views: 158

Authors

S. Sumathi
Department of Electrical and Electronics Engineering, Anna University, Regional Campus, Coimbatore 641 046, India
R. Rajesh
Department of Instrumentation and Control Engineering, Sri Krishna College of Technology, Coimbatore 641 042, India

Abstract


Transformers play an important role in transmission and distribution systems. Even to this day, 75% of high-voltage transformer failure is the outcome of improper dielectric insulation. The reliable operation and ageing characteristics of the transformers mainly depend on the insulation material. Mineral oil has been used as an insulation and coolant for almost a century in power transformers. Due to the development of extra high voltage and to cope with the increasing demand in voltage level, a nanofluids-based transformer oil is proposed here. In this work, nanoparticles such as aluminium oxide, molybdenum disulphide and titanium dioxide are used with transformer oil to analyse the various critical characteristics like dielectric strength, acidity, interfacial tension, viscosity, flash point and fire point of the power transformer. The observed results show that the proposed nanofluids-based transformer oil provides better performance than the normal transformer oil.

References





DOI: https://doi.org/10.18520/cs%2Fv118%2Fi1%2F29-33