Current Science

Open Access Open Access  Restricted Access Subscription Access

Compound Feed Production for Livestock


Affiliations
1 Department of Farm Engineering, Institute of Agricultural Sciences, Banaras Hindu University, Varanasi 221 005, India
2 Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur 131 001, India
 

Dairying is an important source of subsidiary income to small/marginal farmers and agricultural labourers. Cattle feeding practices are generally traditional and most of the feed comes from grazing. However, due to shortage of feed, there has been a gradual shift from traditional feed pattern to compound feed (CF). For livestock it is either in the form of mash, feed block or feed pellets. With added advantages, the feed block and feed pellets are more popular than the mash. In India, CF is produced at the industrial level. The CFmaking machines are classified as feed block-making machines and feed pellet-making machines; these are further classified as manually operated, electrical and IC engine-powered machines. The feed pelleting machines available in the market are expensive and thus unaffordable by livestock farmers. If small-scale animal producers have access to a domestically developed pellet mill technology that is low cost yet dependable, then it reduces the dependency on the high cost of commercial feeds available in the market and makes dairy farming more profitable by taking advantages of different feedstuff available at cheap prices, especially during harvest when high-quality ingredients available at low prices.

Keywords

Compound Feed Production, Dairy Farming, Feed Blocks and Pellets, Livestock.
User
Notifications
Font Size

  • Anon., Establishment of cattle feed manufacturing and processing unit, agro and food processing, Project profile presented in Vibrant Gujarat 2017 by the Directorate of animal husbandry, Agriculture and Co-operation Department, Government of Gujarat, 2017.

  • Ahuja, V., Asian livestock: challenges, opportunities and the response. In Proceedings of an International Policy Forum, Bangkok, Thailand, 16 and 17 August 2012, pp. 78–85.

  • Manoj, P. K., Cattle feed industry in India: a macro perspective. Int. J. Business, Manage. Soc. Sci., 2015, 4, 96–101.

  • Makkar, H. P. S., Feed and fodder challenges for Asia and the pacific. Asian livestock: challenges, opportunities and the response. In Proceedings of an International Policy Forum, Bangkok, Thailand, 16–17 August 2010, pp. 82–97.

  • FAO, Successes and failures with animal nutrition practices and technologies in developing countries. In Proceedings of the FAO Electronic Conference, Rome, Italy, 10–15 September 2011, pp. 1–30.

  • FAO, Balanced feeding for improving livestock productivity – increase in milk production and nutrient use efficiency and decrease in methane emission. In Proceedings of the FAO Animal Production and Health, Rome, Italy, 1–5 October 2012, pp. 31–38.

  • Anon., The prospects and challenges ahead for Indian animal feed industry at 50 years of its existence; http://benisonmedia.com/theprospectsandchallengesaheadforindiananimalfeedindustryat50yearsofitsexistence/ (accessed on 31 August 2016).

  • Okewole, O. T. and Igbeka, J. C., Effect of some operating parameters on the performance of a pelleting press. Agric. Eng. Int. CIGR J., 2016, 18, 326–338.

  • John, M. P. and Manoj, P. K., Prospects of cattle feed industry in India and strategies for utilizing the market potential: a study in Kerala with a focus on factors influencing buyer behaviour. Int. J. Business Gen. Manage., 2014, 3, 1–12.

  • Anon., The pelleting process. California Pellet Mill Co; http:// www.cpm.net/ (accessed on 7 September 2016).

  • Ambalkar, P. P., Shakya, B. R., Bargale, P. C. and Tamhankar, M. B., Status of pelleting technology for integrated aquaculture and livestock feed. Agric. Eng. Today, 2015, 39, 41–46.

  • Salem, H. B. and Nefzaoui, A., Feed blocks as alternative supplements for sheep and goats. Small Ruminant Res., 2003, 49, 275– 288.

  • Indian Standard (IS 2052:2009). Compound feeds for cattle (FAD 5: Livestock Feeds, Equipment and Systems) – specification (4th revision). Amendment No. 1, November 2010, pp. 2–3.

  • Khan, M., Pathak, A. K. and Singh, S., Formulation and preparation of densified complete feed blocks with and without condensed tannins: impact on performance of Haemonchus contortus infected goats. J. Anim. Res., 2017, 7, 431–439.

  • Sharma, T., Feed processing as complete feed block for sustainable animal production in arid and semi-arid regions. In Short course on ‘feeding of livestock during drought and scarcity’, Division of Animal Sciences and Forage Production, Central Arid Zone Research Institute, Jodhpur, ICAR, 2006, pp. 46–53.

  • Kepner, R. A., Bainer, R. and Barger, E. L., Principle of Farm Machinery, CBS Publishers and Distributors Pvt Ltd, New Delhi, 2005, 3rd edn, p. 361.

  • Nwaokocha, C. N. and Akinyemi, O. O., Development of a dual mode laboratory sized pelletizing machine. Leonardo J. Sci., 2008, 1, 22–29.

  • Kaliyan, N. and Morey, R. V., Densification characteristics of corn stover and switchgrass. Trans. ASABE, 2009, 52, 907– 920.

  • Romallosa, A. R. D. and Cabarles, J. C., Design and evaluation of a pellet mill for animal feed production. Multidiscip. Res. J., 2011, 6, 1–17.

  • Zainuddin, M. F., Rosnaha, S., Mohd Noriznana, M. and Dahlan, I., Effect of moisture content on physical properties of animal feed pellets from pineapple plant waste. Agric. Agric. Sci. Proc., 2014, 2, 224–230.

  • Odesola, I. F., Kazeem, R. A. and Ehumadu, N. C., Design and construction of a fish feed extruder. Int. J. Sci. Eng. Res., 2016, 7, 1378–1386.

  • Gabriel, U. U., Akinrotimi, O. A., Bekibele, D. O., Onunkwo, D. N. and Anyanwu. P. E., Locally produced fish feed: potentials for aquaculture development in sub-Saharan Africa. Afr. J. Agric. Res., 2007, 2, 287–295.

  • Anon., Alltech global feed survey – 2015; www.alltech.com (assessed on 22 September 2016).

  • Bohra, H. C., Patel, A. K., Rohilla, P. P., Mathur, B. K., Patil, N. V. and Misra, A. K., Feed production technologies for sustainable livestock production in arid areas. Central Arid Zone Research Institute, Jodhpur, 2012, pp. 1–38.

  • Anon., Pellet Mill Manual; http://www.gemco-machine.com/ (accessed on 20 July 2016).

  • Gao, W., Liu, Q., Zhao, R. and Gu, S., Optimize design on the key parts of ring die fuel pellet machine. Adv. Mater. Res., 2014, 860– 863, 2707–2711.

  • Burmamu, B. R., Aliyu, B. and Tya, T. S. K., Development of a manually operated fish feed pelleting machine. Int. J. Res. Eng. Adv. Technol., 2015, 2, 23–32.

  • Chikwado, U. K., Development and performance test of poultry feed mixing and pelleting machine. Int. J. Sci. Res., 2013, 4, 1161–1166.

  • Kaankuka, T. K. and Osu, D. T., Development of a revolving die and roller fish feed pelletizer. Int. J. Eng. Innov. Res., 2013, 2, 105–110.


Abstract Views: 436

PDF Views: 137




  • Compound Feed Production for Livestock

Abstract Views: 436  |  PDF Views: 137

Authors

D. J. Shrinivasa
Department of Farm Engineering, Institute of Agricultural Sciences, Banaras Hindu University, Varanasi 221 005, India
S. M. Mathur
Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur 131 001, India

Abstract


Dairying is an important source of subsidiary income to small/marginal farmers and agricultural labourers. Cattle feeding practices are generally traditional and most of the feed comes from grazing. However, due to shortage of feed, there has been a gradual shift from traditional feed pattern to compound feed (CF). For livestock it is either in the form of mash, feed block or feed pellets. With added advantages, the feed block and feed pellets are more popular than the mash. In India, CF is produced at the industrial level. The CFmaking machines are classified as feed block-making machines and feed pellet-making machines; these are further classified as manually operated, electrical and IC engine-powered machines. The feed pelleting machines available in the market are expensive and thus unaffordable by livestock farmers. If small-scale animal producers have access to a domestically developed pellet mill technology that is low cost yet dependable, then it reduces the dependency on the high cost of commercial feeds available in the market and makes dairy farming more profitable by taking advantages of different feedstuff available at cheap prices, especially during harvest when high-quality ingredients available at low prices.

Keywords


Compound Feed Production, Dairy Farming, Feed Blocks and Pellets, Livestock.

References





DOI: https://doi.org/10.18520/cs%2Fv118%2Fi4%2F553-559