Open Access Open Access  Restricted Access Subscription Access

Ancient High-Carbon Steel from Southern Tamil Nadu, India: Microstructural and Elemental Analysis


Affiliations
1 Indian Institute of Technology Gandhinagar, Palaj, Gandhinagar 382 355, India
2 Department of Maritime History and Marine Archaeology, Tamil University, Thanjavur 613 010, India
 

There have been claims of early use of high-carbon steel in South India. Still, the antiquity, elemental composition and steelmaking process have not been explored adequately. The high carbon steel was known in the Iron Age or early historical period. However, the large-scale use of such steel was prevalent only in the medieval times. This article examines the presence of steel and its metallographic features in the iron artifacts retrieved from two archaeological sites, namely Ambal and Vallam, Tamil Nadu, India, with occupational evidence from the Iron Age to the medieval period through a number of scientific tests. Metallographic as well as mechanical tests were performed to identify the morphology and measure the strength respectively. Similarly, the chemical composition was determined to quantify the alloying elements in the material. The slag was exposed on the etched surface of the sample cut from axe. Microscopy and chemical composition analysis showed very fine bright dendrites of wüstite in the iron slag. The deterioration of samples was confirmed in microscopic and composition analysis. The result shows that the inhabitants of ancient Ambal and the Vallam were equipped with iron smelting technology and had the knowledge of steelmaking in the Iron Age.

Keywords

Chemical Composition, High-Carbon Steel, Iron Slag, Mechanical Test, Microstructure.
User
Notifications
Font Size

  • Balasubramaniam, R. and Prabhakar, V. N., On technical analysis of characters of the oldest Delhi Iron Pillar inscription. Curr. Sci., 2007, 92, 1709–1719.
  • Srinivasan, S. and Ranganathan, S., Wootz steel: an advanced material of the ancient world. Iron Steel Herit. India, 1997, 69–82.
  • Ghosh, A. and Panigrahi, K. C., Pottery of Ahichchatra (UP). Anc. India, 1946, 1, 37–59.
  • Gordon, D. H., Excavations at Hastinapura and other explorations in the upper Ganga and Sutlej basins, 1950–52. By B. B. Lal. pp. 151, 73 plates, 37 figs. Ancient India, Bulletin of the Archaeological Survey of India, Nos. 10 and 11, 1954–5. Price (complete number) Rs 9 to 14s. Antiquity, 1957.
  • Voysey, H. W., Description of the manufacture of steel in Southern India. J. Asiat. Soc. Bengal, 1832, 1, 245–247.
  • Sasisekaran, B., Metallurgy and metal industry in ancient Tamil Nadu – an archaeological study. Indian J. Hist. Sci., 2002, 37, 17– 29.
  • Srinivasan, S., Indian iron and steel, with special reference to southern India. World Iron, 2013, 83–90.
  • Prokop, P. and Suliga, I., Two thousand years of iron smelting in the Khasi Hills, Meghalaya, North East India. Curr. Sci., 2013, 104, 761–768.
  • David, N., Heimann, R., Killick, D., and Wayman, M., Between bloomery and blast furnace: Mafa iron-smelting technology in North Cameroon. Afr. Archaeol. Rev., 1989, 7, 183–208.
  • Srinivasan, S. and Ranganathan, S., The Significance of Wootz Steel to the History of Materials Science, 2011.
  • Selvakumar, V., Archaeological of the Lower Kaveri Valley: Excavation at Ambal, Nagapattinam District, Tamil Nādu, 2015– 16. Unpubl. Rep., 2020, 21–48.
  • Banerjee, N. R., The Iron Age in India. Ph D thesis, University of Calcutta, 1962.
  • Chakrabarti, D., The beginning of iron in India. Antiquity, 1976.
  • Shaffer, J. G., The Indo-Aryan invasions: cultural myth and archaeological reality. In The People of South Asia People South Asia, Springer, Boston, MA, 1984.
  • Tewari, R., The origins of iron-working in India: new evidence from the Central Ganga Plain and the Eastern Vindhyas. AntiquityOxford, 2003, 77, 536–545.
  • Uesugi, A., An overview on the Iron Age in South Asia. In International Symposium on the Iron Age in South Asia Osaka, 2018, pp. 3–9.
  • Jaikishan, S. and Balasubramaniam, R., Evidences for wootz steel in Northern Telangana – S Jaikishan & R Balasubramaniam.pdf. Indian J. Hist. Sci., 2007, 42, 461–480.
  • Selvakumar, V. et al., Iron Age-Early Historic and Iron Age-Early Historic and Medieval Settlements in the Lower Kaveri Valley: a preliminary report of the Archaeological Excavation at Ambal (2015–16), Nagapattinam District, Tamil Nadu. Puratattva, 2016, 46, 168–174.
  • Johansen, P. G. and Bauer, A. M., Beyond culture history at Maski: land use, settlement and social differences in Neolithic through Medieval South India. Archaeol. Res. Asia, 2015, 1, 6–16.
  • Park, J. S., Rajan, K. and Ramesh, R., High-carbon steel and ancient sword-making as observed in a double-edged sword from an Iron Age megalithic burial in Tamil Nadu, India. Archaeometry, 2020, 62, 68–80.
  • Wadsworth, J. and Sherby, O. D., On the Bulat-Damascus steels revisited. Prog. Mater. Sci., 1980, 25, 35–68.
  • Verhoeven, J., Pattern formation in wootz Damascus steel swords and blades. Indian J. Hist. Sci., 2007, 42(4), 559–574.
  • Juleff, G., An ancient wind-powered iron smelting technology in Sri Lanka. Nature, 1996, 379, 60–63.
  • Selvakumar, V., Archaeology of the Lower Kaviri Delta, on the East Coast of Tamil Nadu: Early Historic Settlement System, 2007.
  • Selvakumar, V., Sangam Age Settlements of Punalnaatu or Kaviri Naatu, 2010.
  • Selvakumar, V., Buddhism and Devaara Temples in the Lower Kaveri Valley. In Lecture Delivered at the 10th Annual Meeting of the Tamil Heritage Foundation, Chennai, 2011.
  • Suresh, S., Nannilam Vattarath Tholliyal, Tamil University, Thanjavur, Tamil Nadu, 2008.
  • Rajan, K. and Ramji, M. S., Palaeolithie sites in Kaveri River Valley of Ariyalur Region, Tamil Nadu. Man Environ., 2009, XXXIV, No. 29.
  • Selvakumar, V., Rajaguru, S. N. and Jhaldiyal, R., Palaeolithic occupation of southern Tamil Nadu, India: new evidence from south of the river Kaveri. Quat. Int., 2012, 269, 74–86.
  • Sailesh, M., Kaveri-Arasalarruppaguthiyin Varalaarum Tholliyalum, Tamil University, Thanjavur, Tamil Nadu, 2013.
  • Gayathri, C. R., Recent Archaeological findings in Tiruvarur region. In 25th Annual Meetings of Tamil Nadu Archaeological Society, Rajapalayam, 2015.
  • Selvakumar, V., History of numbers and fractions and arithmetic calculations in the Tamil region: some observations. HuSS Int. J. Res. Humanit. Soc. Sci., 2016, 3, 27.
  • Subbarayalu, Y., An aspect of the revenue system of the Cholas. Proc. Indian Hist. Congr., 1984, 45, 172–176.
  • Sukhanov, D. А. and Plotnikova, N. V., Mechanical properties of xviii century Persian Bulat Steel compared with modern tool steels. Metallurgist, 2020, 63, 1192–1203.
  • Park, J. S. and Rehren, T., Large-scale 2nd to 3rd century AD bloomery iron smelting in Korea. J. Archaeol. Sci., 2011, 38, 1180–1190.
  • Selskienė, A., Examination of smelting and smithing slags formed in bloomery iron-making process. Chemija, 2007, 18, 22–28.

Abstract Views: 472

PDF Views: 175




  • Ancient High-Carbon Steel from Southern Tamil Nadu, India: Microstructural and Elemental Analysis

Abstract Views: 472  |  PDF Views: 175

Authors

Amit Kumar Singh
Indian Institute of Technology Gandhinagar, Palaj, Gandhinagar 382 355, India
Alok Kumar Kanungo
Indian Institute of Technology Gandhinagar, Palaj, Gandhinagar 382 355, India
V. Selvakumar
Department of Maritime History and Marine Archaeology, Tamil University, Thanjavur 613 010, India
Amit Arora
Indian Institute of Technology Gandhinagar, Palaj, Gandhinagar 382 355, India

Abstract


There have been claims of early use of high-carbon steel in South India. Still, the antiquity, elemental composition and steelmaking process have not been explored adequately. The high carbon steel was known in the Iron Age or early historical period. However, the large-scale use of such steel was prevalent only in the medieval times. This article examines the presence of steel and its metallographic features in the iron artifacts retrieved from two archaeological sites, namely Ambal and Vallam, Tamil Nadu, India, with occupational evidence from the Iron Age to the medieval period through a number of scientific tests. Metallographic as well as mechanical tests were performed to identify the morphology and measure the strength respectively. Similarly, the chemical composition was determined to quantify the alloying elements in the material. The slag was exposed on the etched surface of the sample cut from axe. Microscopy and chemical composition analysis showed very fine bright dendrites of wüstite in the iron slag. The deterioration of samples was confirmed in microscopic and composition analysis. The result shows that the inhabitants of ancient Ambal and the Vallam were equipped with iron smelting technology and had the knowledge of steelmaking in the Iron Age.

Keywords


Chemical Composition, High-Carbon Steel, Iron Slag, Mechanical Test, Microstructure.

References





DOI: https://doi.org/10.18520/cs%2Fv121%2Fi2%2F239-247