Current Science

Open Access Open Access  Restricted Access Subscription Access

Stable and upgraded horizontal datum for India


Affiliations
1 Indian Institute of Technology, Kanpur 208 016 GFZ German Research Centre for Geosciences, 14473 Potsdam, Germany, India
2 Indian Institute of Technology, Kanpur 208 016, India
3 GFZ German Research Centre for Geosciences, 14473 Potsdam; Institute of Geodesy and Geoinformation Science, Technische Universität Berlin, 10623 Berlin, Germany
 

A precise datum is significant as a starting or reference point for a multitude of activities like floodplain maps, property boundaries, civil surveys, precise agriculture, crustal deformation and climate studies, and works requiring consistent coordinates. A large nation like India, with almost its own tectonic plate, must have a well-defined network of horizontal datum for determining accurate and reliable 3D positioning for every user, anywhere and anytime. This article discusses the significance, methodology of realization and transformation, applications and static/dynamic coordinates for paving the way for a National Horizontal Datum in India

Keywords

Geodetic Survey, Horizontal Datum, Reference Frame, Tectonic Plate, Three-dimensional Positioning
User
Notifications
Font Size

  • DMA, Geodesy for the Layman. DMA Technical Report 80-003, The Defense Mapping Agency, 1983, pp. 29–39.

  • Lee, Y. J., Lee, H. K. and Jung, G. H., Realization of New Korean Horizontal Geodetic Datum: GPS observation and network adjustment. In Proceedings of the Korean Institute of Navigation and Port Research Conference, Seoul, Korea, 2006, pp. 529–534.

  • National Research Council, Precise Geodetic Infrastructure: National Requirements for a Shared Resource, National Academies Press, Washington, DC, USA, 2010.

  • Schweiger, V., Lilje, M. and Sarib, R., GNSS CORS – reference frames and services. In Proceedings of the Seventh FIG Regional Conference, Hanoi, Vietnam, October 2009.

  • Hu, G., Jia, M. and Dawson, J., Report on the Asia Pacific Reference Frame (APREF) Project. Geoscience Australia, Record 2019/17, 2019.

  • Petit, G. and Luzum, B., IERS Conventions (2010), Verlag des Bundesamts fur Kartographie und Geodasi. Frankfurt am Main, 2010.

  • Caccamise II, J. D., Positioning a nation for the future: modernizing the United States National Spatial Reference System. In SIRGAS 25 Year Symposium, Aguascalientes, Mexico, October 2018.

  • Haasdyk, J., Donnelly, N., Harrison, C., Rizos, C., Roberts, C. and Stanaway, R., Options for modernising the Geocentric Datum of Australia. In Proceedings of Research@ Locate, 2014, vol. 14, pp. 72–85.

  • Snay, R. A. and Soler, T., Continuously operating reference station CORS: history, applications, and future enhancements. J. Survey. Eng., 2008, 134(4).

  • Intergovernmental Committee on Surveying and Mapping (ICSM), Geocentric Datum of Australia 2020 Technical Manual. Commonwealth of Australia (Geoscience Australia), Australia, 2018, vol. 1.2, pp. 1–77.

  • Cai, J., The systematic analysis of the transformation between the German geodetic reference system (DHDN, DHHN) and the ETRF system (DTREF91). Earth Planets Space, 2000, 52, 947–952.

  • Dostal, J., Geodetic activities in Germany. In PosKEN Workshop, Bruges, Belgium, October 2018.

  • Schwieger, V., An example of terrestrial reference frame realisation, Germany. In IAG/FIG Commission 5/ICG Technical Seminar, Rome, Italy, May 2012.

  • Raman, A. and Balakrishnan, V., The spark that fired the Great Trigonometrical Survey of India: the triangulation survey made between Fort St. George (13°08′N) and Mangalore (12°91′N) by William Lambton in the early 1800s. Curr. Sci., 2020, 118(1), 147–154.

  • Agrawal, N. K., Geodetic Infrastructure of India. In Website of Coordinates, 2005; https://mycoordinates.org/geodetic-infrastructurein-india/all/1/ (accessed on 13 September 2021).

  • Singh, S. K., Coordinate transformation between Everest and WGS84 datum – a parametric approach. Geodetic and Research Branch, Survey of India, Dehradun, 2002.

  • Mueller, I. I., Spherical and Practical Astronomy: As Applied to Geodesy, F. Ungar Pub. Co, New York, USA, 1969.

  • Kumar, M., World geodetic system 1984: a modern and accurate global reference frame. Mar. Geodesy, 1988, 12(2), 117–126; doi: 10.1080/15210608809379580.

  • Carlson, E. E., How to transition to the United States 2022 National Coordinate System without getting left behind. In Workshop on Applications of Global Navigation Satellite System, United Nations Office for Outer Space Affairs, Fiji, June 2019.

  • Rizos, C., Multi-constellation GNSS/RNSS from the perspective of high accuracy users in Australia. J. Spat. Sci., 2008, 53(2), 29–63.

  • International GNSS Service (IGS), IGS site guidelines, July 2015; https://kb.igs.org/hc/enus/article_attachments/202277487/IGS_Site_ Guidelines_July_2015.pdf.

  • Bruyninx, C., Roosbeek, F., Habrich, H., Weber, G., Kenyeres, A. and Stangl, G., The EUREF Permanent Network Report, Royal Observatory, Belgium, 2000.

  • Bruyninx, C., Legrand, J., Fabian, A. and Pottiaux, E., GNSS metadata and data validation in the EUREF Permanent Network. GPS Solut., 2019, 23, 106.

  • van Mierlo, J., Difficulties in defining the quality of geodetic networks. In Survey Control Networks, Schriftenr. Fils. Stud. Verm. HS Bw, 1982, vol. 7, pp. 259–274.

  • Intergovernmental Committee on Surveying and Mapping (ICSM), Guideline for the adjustment and evaluation of survey control: special publication 1, Commonwealth of Australia (Geoscience Australia), 2014, vol. 2.1.

  • Altamimi, Z. et al., The terrestrial reference frame and the dynamic Earth. Eos, Trans., AGU, 2001, 82(25), 273–279.

  • Bosy, J., Global, regional and national geodetic reference frames for geodesy and geodynamics. Pure Appl. Geophys., 2014, 171, 783–808.

  • Thi, H. P., Quoc, D. N., Hoai, T. T. T., The, H. P. and Thi, N. L., Determination of the relationship between Vietnam coordinate reference system (VN-2000) and ITRS, WGS84 and PZ-90. In E3S Web of Conferences, EDP Sciences 2019, vol. 94, p. 03014.

  • Interactive map of ITRF2014 network; https://www.iers.org/ IERS/EN/DataProducts/ITRF/map/itrfmap.html (accessed on 3 November 2021).

  • Boucher, C. and Altamimi, Z., Memo: specifications for reference frame fixing in the analysis of a EUREF GPS campaign. ETRS 89. IGN, 2011, version 8.

  • Dawson, J. and Woods, A., ITRF to GDA94 coordinate transformations. J. Appl. Geodesy, 2010, 4(4), 189–199.

  • Poutanen, M. and Hakli, P., Future of National Reference Frames – from static to kinematic. Geodesy Cartogr., Pol. Acad. Sci., 2018, 67(1), 117–129.

  • Bllck, G. and Stanaway, R., Four dimensional deformation models for terrestrial reference frames. In IAG/FIG Commission 5/ICG Technical Seminar, Rome, Italy, May 2012. 34. Azhari, M. et al., Semi-kinematic geodetic reference frame based on the ITRF2014 for Malaysia. J. Geod. Sci., 2020, 10, 91–109.

  • Blick, G. and Grant, D., The implementation of a semi-dynamic datum in New Zealand – ten years on. In Proceedings of FIG Congress 2010, Sydney, Australia, April 2010.

  • Simons, W. J. et al., A decade of GPS in Southeast Asia: resolving Sundaland motion and boundaries. J. Geophys. Res.: Solid Earth, 2007, 112(B6).

  • European Global Navigation Satellite Systems Agency, GSA GNSS Market Report. Publications Office of the European Union, Luxembourg, 2019, issue 6.

  • European Global Navigation Satellite Systems Agency, GNSS Market Report. Publications Office of the European Union, Luxembourg, 2017, issue 5.

  • Federation of Indian Chambers of Commerce and Industry (FICCI), Geospatial technologies in India: select success stories, 2017.

  • Drewes, H., Frequent epoch reference frames instead of instant station positions and constant velocities. In SIRGAS Symposium, Mendoza, Argentina, November 2017.

  • Bruyninx, C. et al., The European Reference Frame: maintenance and products. In Geodetic Reference Frames, International Association of Geodesy Symposia, Springer, Berlin, 2009, vol. 134, pp. 131–136.

  • DST, Draft National Geospatial Policy, Department of Science and Technology, Government of India, New Delhi, 2021.


Abstract Views: 358

PDF Views: 144




  • Stable and upgraded horizontal datum for India

Abstract Views: 358  |  PDF Views: 144

Authors

Sujata Dhar
Indian Institute of Technology, Kanpur 208 016 GFZ German Research Centre for Geosciences, 14473 Potsdam, Germany, India
Nagarajan Balasubramanian
Indian Institute of Technology, Kanpur 208 016, India
Onkar Dikshit
Indian Institute of Technology, Kanpur 208 016, India
Harald Schuh
GFZ German Research Centre for Geosciences, 14473 Potsdam; Institute of Geodesy and Geoinformation Science, Technische Universität Berlin, 10623 Berlin, Germany

Abstract


A precise datum is significant as a starting or reference point for a multitude of activities like floodplain maps, property boundaries, civil surveys, precise agriculture, crustal deformation and climate studies, and works requiring consistent coordinates. A large nation like India, with almost its own tectonic plate, must have a well-defined network of horizontal datum for determining accurate and reliable 3D positioning for every user, anywhere and anytime. This article discusses the significance, methodology of realization and transformation, applications and static/dynamic coordinates for paving the way for a National Horizontal Datum in India

Keywords


Geodetic Survey, Horizontal Datum, Reference Frame, Tectonic Plate, Three-dimensional Positioning

References





DOI: https://doi.org/10.18520/cs%2Fv123%2Fi1%2F43-51