Artificial Intelligent Systems and Machine Learning

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Implementation of Input Parallel Output Series QRC fed DC Servo Drive


Affiliations
1 JNTU and S.V. University, Tirupati, India
2 Department of Electrical Engineering, S.V. University, Tirupati, A.P., India
3 Electrical and Electronics Engineering Department, Jerusalem College of Engineering, Chennai, India
     

   Subscribe/Renew Journal


This paper deals with the implementation of input parallel, output series QRC fed DC servo drive. The salient feature of QRC is that the switching devices can be either switched on at zero voltage or switched off at zero current, so that switching losses are zero ideally. Switching stresses are low, volumes are low and the power density is high. This property imparts high efficiency and high power density to the converters. The output of QRC is regulated by varying the switching frequency of the converter. Hence it is called Frequency modulated Zero current/zero voltage switching quasi resonant converter. The present work deals with the simulation and implementation of DC Servo motor fed from Input parallel output series ZCS—QRC. Simulation results show that the ZCS-QRC’s have low total harmonic distortion. Input parallel output series QRC fed DC servo drive is simulated and the results are presented. This converter is proposed for DC servo motors with higher voltage rating. The experimental results are compared with the simulation results.

Keywords

Input Parallel Output Series Converter (IPOSC), Interleaved Buck Converter (IBC), Pulse Width Modulation (PWM), Quasi Resonant Converter (QRC).
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 220

PDF Views: 3




  • Implementation of Input Parallel Output Series QRC fed DC Servo Drive

Abstract Views: 220  |  PDF Views: 3

Authors

K. Narasimha Rao
JNTU and S.V. University, Tirupati, India
V. C. Veera Reddy
Department of Electrical Engineering, S.V. University, Tirupati, A.P., India
S. Rama Reddy
Electrical and Electronics Engineering Department, Jerusalem College of Engineering, Chennai, India

Abstract


This paper deals with the implementation of input parallel, output series QRC fed DC servo drive. The salient feature of QRC is that the switching devices can be either switched on at zero voltage or switched off at zero current, so that switching losses are zero ideally. Switching stresses are low, volumes are low and the power density is high. This property imparts high efficiency and high power density to the converters. The output of QRC is regulated by varying the switching frequency of the converter. Hence it is called Frequency modulated Zero current/zero voltage switching quasi resonant converter. The present work deals with the simulation and implementation of DC Servo motor fed from Input parallel output series ZCS—QRC. Simulation results show that the ZCS-QRC’s have low total harmonic distortion. Input parallel output series QRC fed DC servo drive is simulated and the results are presented. This converter is proposed for DC servo motors with higher voltage rating. The experimental results are compared with the simulation results.

Keywords


Input Parallel Output Series Converter (IPOSC), Interleaved Buck Converter (IBC), Pulse Width Modulation (PWM), Quasi Resonant Converter (QRC).