Artificial Intelligent Systems and Machine Learning

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Energy Management Using Rubber Anaconda


Affiliations
1 Dept. of EEE, Narasu's Sarathy Institute of Technology, Salem, Tamil Nadu, India
     

   Subscribe/Renew Journal


In our enhancing world power production is very less and the power production causes many factors. So we should manage power with efficient way and should reduce power wastage. Use the power in proper manner. And also we need a source that will not affect our environment. Need of power in our world is very high, so for producing electricity some renewable energy sources are required. This type of renewable source is "RUBBER ANACONDA". Wave power is used to produce electricity from this rubber anaconda.
This is one of the renewable energy using wave power. In this a rubber tube is used to produce power. In the rubber tube both ends are closed and one end of the tube connected with turbine and generator. Wave energy from the sea is converted inside the rubber as kinetic energy. This kinetic energy is used to drive the turbine and the turbine shaft is connected with the generator from that we produce electricity. This electricity is taken outside via cable.
The production of power by using this anaconda is very low cost. Electricity produced from anaconda is capable of supplying power for more than 2000 houses. Since water in the sea will not shrunken till the end of the mankind, the production of power will be continuous. But the main thing is this project still in research phase.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 221

PDF Views: 4




  • Energy Management Using Rubber Anaconda

Abstract Views: 221  |  PDF Views: 4

Authors

P. Venkata Ganesh
Dept. of EEE, Narasu's Sarathy Institute of Technology, Salem, Tamil Nadu, India
P. Yashwanth
Dept. of EEE, Narasu's Sarathy Institute of Technology, Salem, Tamil Nadu, India
P. Sudarsan
Dept. of EEE, Narasu's Sarathy Institute of Technology, Salem, Tamil Nadu, India
E. Arunprakash
Dept. of EEE, Narasu's Sarathy Institute of Technology, Salem, Tamil Nadu, India

Abstract


In our enhancing world power production is very less and the power production causes many factors. So we should manage power with efficient way and should reduce power wastage. Use the power in proper manner. And also we need a source that will not affect our environment. Need of power in our world is very high, so for producing electricity some renewable energy sources are required. This type of renewable source is "RUBBER ANACONDA". Wave power is used to produce electricity from this rubber anaconda.
This is one of the renewable energy using wave power. In this a rubber tube is used to produce power. In the rubber tube both ends are closed and one end of the tube connected with turbine and generator. Wave energy from the sea is converted inside the rubber as kinetic energy. This kinetic energy is used to drive the turbine and the turbine shaft is connected with the generator from that we produce electricity. This electricity is taken outside via cable.
The production of power by using this anaconda is very low cost. Electricity produced from anaconda is capable of supplying power for more than 2000 houses. Since water in the sea will not shrunken till the end of the mankind, the production of power will be continuous. But the main thing is this project still in research phase.