Artificial Intelligent Systems and Machine Learning

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Network Data Logging with Nut Runner Machines Using PLC in Automobile Industry


Affiliations
1 Department of ECE, Agni College of Technology, Chennai, India
     

   Subscribe/Renew Journal


The main objective of this project is to interface the nut runner machine in the tightening system with the master computer. Nut runner is a torque tightening machine. It is used to tighten the bolts which are very complex by manual tightening. By this interfacing, it can collect and store all the data from the machine including torque, angle, and status of the tightening bolts, in accordance with the engine number. For the interfacing purpose, it uses a hardware component called PROFIBUS. PROFIBUS is a process field bus it has a special feature that is, it can collect and store all the resultant data into the master computer. By using a software interface Win CC flexible and hardware interface SIMATIC net card and includes Visual basics to display all the data.


Keywords

PROFIBUS DP, Siemens SIMATIC S7 300, Win CC Flexible, Visual Basics Script, Nut Runner Tightening.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 341

PDF Views: 6




  • Network Data Logging with Nut Runner Machines Using PLC in Automobile Industry

Abstract Views: 341  |  PDF Views: 6

Authors

K. Bhuvana
Department of ECE, Agni College of Technology, Chennai, India
R. Gomathy
Department of ECE, Agni College of Technology, Chennai, India
R. Harini Devi
Department of ECE, Agni College of Technology, Chennai, India
M. Ishwariya
Department of ECE, Agni College of Technology, Chennai, India
R. Maheswari
Department of ECE, Agni College of Technology, Chennai, India

Abstract


The main objective of this project is to interface the nut runner machine in the tightening system with the master computer. Nut runner is a torque tightening machine. It is used to tighten the bolts which are very complex by manual tightening. By this interfacing, it can collect and store all the data from the machine including torque, angle, and status of the tightening bolts, in accordance with the engine number. For the interfacing purpose, it uses a hardware component called PROFIBUS. PROFIBUS is a process field bus it has a special feature that is, it can collect and store all the resultant data into the master computer. By using a software interface Win CC flexible and hardware interface SIMATIC net card and includes Visual basics to display all the data.


Keywords


PROFIBUS DP, Siemens SIMATIC S7 300, Win CC Flexible, Visual Basics Script, Nut Runner Tightening.