ICTACT Journal on Communication Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Performance Investigation of Optical Transmission System using DCF-EDFA Techniques


Affiliations
1 Department of Electronics Engineering, Rajasthan Technical University, India
     

   Subscribe/Renew Journal


In this paper, a single channel optical system is proposed with dispersion compensation fiber techniques. Dispersion compensation method restricts the pulse broadening consequence of transmitted pulse in optical systems. To overcome dispersion trouble; dispersion compensation scheme modeled for investigate the performance of optical system. The proposed model is designed for 10Gbps with nonreturn- to-zero (NRZ) modulation format with erbium doped fiber amplifier (EDFA) over a length of 15km single mode fiber (SMF) and 3km dispersion compensation fiber (DCF). The performance of designed model is analyzed in terms of output power (dBm), gain (dB), noise figure (dB), Q-factor, BER and Eye-diagrams by varying the fiber length (km), input power (dBm) and attenuation constant (dB/km). The simulation is carried out in Opti-System7.0 simulator.

Keywords

Bit Error Rate, Dispersion Compensation Fiber, Erbium Doped Fiber Amplifier, Non-Return-to-Zero.
Subscription Login to verify subscription
User
Notifications
Font Size

  • B. Mukherjee, “WDM Optical Communication Networks: Progress and Challenges”, IEEE Journal on Selected Areas in Communications, Vol. 18, No. 10, pp. 1810-1824, 2000.

  • B. Chomycz, “Planning Fiber Optic Networks”, McGraw-Hill, 2000.

  • K.R. Ramaswami, H. Sivarajan and H.G. Sasaki, “Optical Networks”, Elsevier, 2000.

  • P. Anuseetal and S. Singh, “Analysis of EDFA based 16-Channel C-Band Optical WDM System for Different Pumping Schemes”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 5, No. 6, pp. 12-18, 2016.

  • S. Semmalar and S. Malarkkan, “Optical Signal Power Analysis in Erbium-Doped Fiber Amplifier with Pump Power and Length Variation using Various Pumping Techniques”, ISRN Electronics, Vol. 16, No. 2, pp. 1-8, 2013.

  • B.H. Choi, H.H. Park and M.J. Chu, “New Pump Wavelength of 1540-nm Band for Long-Wavelength-Band Erbium-Doped Fiber Amplifier (L-Band EDFA)”, IEEE Journal of Quantum Electronics, Vol. 39, No. 10, pp. 1272-1280, 2003.

  • R.S. Kaler, Ajay K Sharma and T.S. Kamal, “Comparison of Pre, Post and Symmetrical Dispersion Compensation Schemes for 10Gb/s NRZ Links using Standard and Dispersion Compensated Fibers”, Elsevier Optics Communication, Vol. 209, No. 1-3, pp. 107-123, 2002.

  • P. Singh and R. Chahar, “Performance Analysis of Dispersion Compensation in Long Haul Optical Fiber using DCF”, International Journal of Engineering and Science, Vol. 2, No. 7, pp. 18-22, 2014.

  • Govind P. Agrawal, “Fiber Optics Communication Systems”, 3rd Edition, John Wiley and Sons, 2002.

  • Neheeda P, Pradeep M and Shaija P.J, “Analysis of WDM System with Dispersion Compensation Schemes”, International Conference on Advances in Computing and Communications, Vol. 93, No. 1, pp. 647-654, 2017.

  • M. Othman, “An Analysis of 10Gbits/s Optical Transmission System using fiber Bragg Grating (FBG)”, IOSR Journal of Engineering, Vol. 2, No. 7, pp. 55-61, 2012.

  • K. Kumar, “Performance Analysis of Dispersion Compensation using Fiber Bragg Grating (FBG) in Optical Communication”, International Journal of Current Engineering and Technology, Vol. 4, No. 3, pp. 1527-1531, 2014.

  • B. Prasad, K.C. Patra and N.K Barpanda, “Performance Analysis of Fiber Optical Communication using Fiber Bragg Grating as Dispersion Compensator”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 5, No. 4, pp. 2729-2733, 2016.

  • Mounia Chakkour, Otman Aghzout, Badiaa Ait Ahmed, Fahd Chaoui, and Mounir El Yakhloufi, “Chromatic Dispersion Compensation Effect Performance Enhancements using FBG and EDFA-Wavelength Division Multiplexing Optical Transmission System”, Internal Journal of Optics, Vol. 2017, pp. 1-8, 2017.

  • N. Mohammed, M. Solaiman and M. Aly, “Design and Performance Evaluation of a Dispersion Compensation Unit using Several Chirping Functions in a TANH Apodized FBG and Comparison with Dispersion Compensation Fiber”, Applied Optics, Vol. 53, No. 29, pp. 239-247, 2014.

  • M.L. Meena and Deepika Meena, “Performance Analysis of DWDM Optical Network with Dispersion Compensation Techniques for 4×8Gbps Transmission System”, ICTACT Journal on Microelectronics, Vol. 4, No. 2, pp. 613-617, 2018.


Abstract Views: 321

PDF Views: 0




  • Performance Investigation of Optical Transmission System using DCF-EDFA Techniques

Abstract Views: 321  |  PDF Views: 0

Authors

M. L. Meena
Department of Electronics Engineering, Rajasthan Technical University, India
Pragya Purohit
Department of Electronics Engineering, Rajasthan Technical University, India

Abstract


In this paper, a single channel optical system is proposed with dispersion compensation fiber techniques. Dispersion compensation method restricts the pulse broadening consequence of transmitted pulse in optical systems. To overcome dispersion trouble; dispersion compensation scheme modeled for investigate the performance of optical system. The proposed model is designed for 10Gbps with nonreturn- to-zero (NRZ) modulation format with erbium doped fiber amplifier (EDFA) over a length of 15km single mode fiber (SMF) and 3km dispersion compensation fiber (DCF). The performance of designed model is analyzed in terms of output power (dBm), gain (dB), noise figure (dB), Q-factor, BER and Eye-diagrams by varying the fiber length (km), input power (dBm) and attenuation constant (dB/km). The simulation is carried out in Opti-System7.0 simulator.

Keywords


Bit Error Rate, Dispersion Compensation Fiber, Erbium Doped Fiber Amplifier, Non-Return-to-Zero.

References