ICTACT Journal on Communication Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Suppressed Carrier Frequency Division Multiplexing For Indoor Optical Wireless Communication


Affiliations
1 Department of Electronics and Telecommunication, St. Francis Institute of Technology, India
2 Department of Electronics and Telecommunication, Thakur College of Engineering, India
     

   Subscribe/Renew Journal


Asymmetrically clipped orthogonal frequency division multiplexing (ACO-OFDM) is one of the optical modulation techniques for indoor optical wireless communication systems (OWC) to enable intensity (IM) modulation and direct detection (DD). As compared to other techniques, ACO-OFDM is power efficient, bandwidth efficient and has zero impact of clipping noise. However, its high peak to average power ratio (PAPR) may lead to performance deterioration and also introduce nonlinear distortion in optical source. To further enhance its performance by reducing the PAPR, suppressed carrier frequency division multiplexing (SC-FDM) is proposed and the system is titled as interleaved coded ACO (ICACO)-OFDM. To evaluate the performance of the system, simulation has been carried out for 16-QAM, 256 subcarriers, 1000 symbols. By observing the curves generated by Complementary cumulative distribution function (CCDF) at the probability of 10-3, PAPR has been characterized. It is observed that PAPR of ICACO-OFDM is 4.98 dB less as compared to ACO-OFDM system.

Keywords

Asymmetrically Clipped Orthogonal Frequency Division Multiplexing (ACO-OFDM), Peak to Average Power Ratio (PAPR), Complementary Cumulative Distribution Function CCDF, Subcarrier Multiplexing
Subscription Login to verify subscription
User
Notifications
Font Size

  • J. Armstrong, “OFDM for Optical Communications”, Journal of Lightwave Technology, Vol. 27, No. 3, pp. 189204, 2009.

  • J. Kahn and J. Barry, “Wireless Infrared Communications”, Proceedings of IEEE, Vol. 85, No. 2, pp. 265-298, 1997.

  • H. Elgala, R. Meshleh and H. Haas, “Indoor Optical Wireless Communication: Potential and State-of-the Art”, IEEE Communication Magazine, Vol. 49, No. 9, pp. 56-62, 2011.

  • S.B. Weinstein and P.M. Ebert, “Data Transmission by Frequency-Division Multiplexing using the Discrete Fourier Transform”, IEEE Transactions on Communication Technology, Vol. 19, No. 5, pp. 628-634, 1971.

  • Zelalem Hailu Gebeyehu, Philip Kibet Langat and Ciira Wa Maina, “BER Performance of Stratified ACO-OFDM for Optical Wireless Communications over Multipath Channel”, Journal of Computer Networks and Communications, Vol. 23, No. 1, pp. 1-14, 2018.

  • S. D. Dissanayake and J. Armstrong, “Comparison of ACOOFDM, DCO-OFDM and ADO-OFDM in IM/DD Systems”, Journal of Lightwave Technology, Vol. 31, No. 7, pp. 1063-1073, 2013.

  • Dobroslav Tsonev, Sinan Sinanovic and Harald Haas, “Novel Unipolar Orthogonal Frequency Division Multiplexing (U-OFDM) for Optical Wireless”, Proceedings of IEEE Conference on Vehicular Technology, pp. 6-9, 2012.

  • N. Fernando, Y. Hong and E. Viterbo, “Flip-OFDM for Unipolar Communication Systems”, IEEE Transactions on Communications, Vol. 60, No. 12, pp. 3726-3733, 2012.

  • Jayasudha Koti and B.K. Mishra, “Performance Analysis of Unipolar Communication Techniques for Optical Wireless Communication”, Proceedings of IEEE Conference on Networking, Embedded and Wireless Systems, pp. 1-12, 2018.

  • Andrew J. Viterbi, “Convolutional Codes and their Performance in Communication Systems”, IEEE Transactions on Communications, Vol. 19, No. 5, pp. 751772, 1971.

  • Jayasudha Koti and B.K. Mishra, “Comparitive Analysis of ACO-OFDM and CACO-OFDM for Indoor Optical Wireless Communication”, Proceedings of IEEE Conference on Microwave Integrated Circuits, Photonics and Wireless Networks, pp. 1-9, 2019.

  • Jurong Bai, Chenfei Cao, Yi Yang, Feng Zhao and Xiangjun Xin, “Peak-to-Average Power Ratio Reduction for DCOOFDM Underwater Optical Wireless Communication System based on an Interleaving Technique”, Journal of Optical Engineering, Vol. 57, No. 8, pp. 1-15, 2018.

  • Abbas Ali Sharif, “PAPR Reduction of Optical OFDM Signals in Visible Light Communications”, ICT Express, Vol. 5, No. 3, pp. 202-205, 2019.


Abstract Views: 215

PDF Views: 0




  • Suppressed Carrier Frequency Division Multiplexing For Indoor Optical Wireless Communication

Abstract Views: 215  |  PDF Views: 0

Authors

Jayasudha Koti
Department of Electronics and Telecommunication, St. Francis Institute of Technology, India
B.K. Mishra
Department of Electronics and Telecommunication, Thakur College of Engineering, India

Abstract


Asymmetrically clipped orthogonal frequency division multiplexing (ACO-OFDM) is one of the optical modulation techniques for indoor optical wireless communication systems (OWC) to enable intensity (IM) modulation and direct detection (DD). As compared to other techniques, ACO-OFDM is power efficient, bandwidth efficient and has zero impact of clipping noise. However, its high peak to average power ratio (PAPR) may lead to performance deterioration and also introduce nonlinear distortion in optical source. To further enhance its performance by reducing the PAPR, suppressed carrier frequency division multiplexing (SC-FDM) is proposed and the system is titled as interleaved coded ACO (ICACO)-OFDM. To evaluate the performance of the system, simulation has been carried out for 16-QAM, 256 subcarriers, 1000 symbols. By observing the curves generated by Complementary cumulative distribution function (CCDF) at the probability of 10-3, PAPR has been characterized. It is observed that PAPR of ICACO-OFDM is 4.98 dB less as compared to ACO-OFDM system.

Keywords


Asymmetrically Clipped Orthogonal Frequency Division Multiplexing (ACO-OFDM), Peak to Average Power Ratio (PAPR), Complementary Cumulative Distribution Function CCDF, Subcarrier Multiplexing

References