![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
Mitigation of Power Quality Problems Using Novel DSTATCOM Operating Under Stiff Source
Normally induction motors connected to a stiff source cannot be protected from voltage disturbances in a distribution system using a distribution static compensator (DSTATCOM). A normal DSTATCOM can operate either in Voltage Control Mode (VCM) or Current Control Mode (CCM). When an induction motor operated under stiff source may get faults either from voltage disturbances or current disturbances. To solve this, a new control algorithm is proposed to make as multifunctional i.e, operated in VCM under stiff source and CCM in normal operation. From this, a fast voltage regulation is achieved at the load terminal and protects induction machine drive system during voltage disturbances and current disturbances. In this paper major power quality faults i.e, sag is injected and compensated using multifunctional DSTATCOM. The complete project is carried out using MATLAB/SIMULINK.
Keywords
Stiff Source, DSTATCOM, Induction Motor, Sag, Load Angle.
User
Font Size
Information
- i. Chandan kumar and M.K.Mishra, “ A Multifunctional DSTATCOM operating under stiff source,” IEEE Trans. On industrial electronics, vol.61,no.7,pp.3131-3136, Jul.2014.
- ii. A. Bhattacharya and C. Chakraborty, “A shunt active power filter with enhanced performance using ANN-based predictive and adaptive controllers,”IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 421-428, Feb. 2011.
- iii. S. Rahmani, A. Hamadi, and K. Al-Haddad, “A Lyapunovfunctionbased control for a three-phase shunt hybrid active filter,” IEEE Trans. Ind. nElectron., vol. 59, no. 3, pp. 1418-1429, Mar.2012.
- iv. M. K. Mishra and K. Karthikeyan, “An investigation on design and switching dynamics of a voltage source inverter to compensate unbalanced and nonlinear loads,” IEEE Trans. Ind.Electron., vol. 56, no. 8, pp. 2802-2810, Aug. 2009.
- v. J. Liu, P. Zanchetta, M. Degano, and E. Lavopa, “Control design and implementation for high performance shunt active filters in aircraft powergrids,” IEEE Trans. Ind. Electron., vol. 59, no. 9, pp. 3604-3613, Sep. 2012.
- vi. A. Bhattacharya, C. Chakraborty, and S. Bhattacharya, “Parallel connected shunt hybrid active power filters operating at different switching frequencies for improved performance,” IEEE Trans. Ind. Electron., vol. 59, no. 11, pp. 4007-4019, Nov. 2012.
- vii. Q.-N. Trinh and H.-H. Lee, “An advanced current control strategy for three-phase shunt active power filters,” IEEE Trans. Ind. Electron., vol. 60, no. 12, pp. 5400-5410, Dec. 2013.
- viii. M. K. Mishra, A. Ghosh, and A. Joshi, “Operation of a DSTATCOM in voltage control mode,” IEEE Trans. Power Del., vol. 18, no. 1, pp. 258-264, Jan. 2003.
- ix. H. Fujita and H. Akagi, “Voltage-regulation performance of a shunt active filter intended for installation on a power distribution system,” IEEE Trans. Power Electron., vol. 22, no. 3, pp. 1046-1053, May 2007.
- x. R. Gupta, A. Ghosh, and A. Joshi, “Performance comparison of VSC based shunt and series compensators used for load voltage control in distribution systems,” IEEE Trans. Power Del., vol. 26, no. 1, pp. 268-78, Jan. 2011.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 191
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 1