Open Access
Subscription Access
Open Access
Subscription Access
Design and Implementation of High Speed Latched Comparator Using gm/Id Sizing Method
Subscribe/Renew Journal
Design of an analog circuit depends on several factors such as design methodology, good modeling and technology characterization. This work focuses on designing a high speed (1.6GHz) latched comparator with low power consumption suitable for ADCs in SoC applications. The latched comparator is designed with StrongArm latch as the primary decision and amplification stage followed by a latching element to drive the output load. The StrongArm latch is a proven circuit topology suitable for all seasons. The zero static power consumption of StrongArm latch is exploited to design a low power comparator. The output latch is used to hold the previous output value during the tracking time of the comparator. The designed comparator achieves zero setup time at a clock frequency of 1.6GHz and produces digital output with a maximum delay of 180ps.The comparator is implemented with SAED 32nm technology libraries. The performance has been analyzed using HSPICE simulator.
Keywords
Latched Comparator, Strong Arm Latch, High Speed, Low Power.
Subscription
Login to verify subscription
User
Font Size
Information
- Shubhara Yewale and Radheshyam Gamad, “Design of Low Power and High Speed CMOS Comparator for A/D Converter Application”, Wireless Engineering and Technology, Vol. 3, No. 2, pp. 90-95, 2012.
- Fernando da Rocha Paixao Cortes, Eric E. Fabris and Sergio Bampi, “Analysis and Design of Amplifiers and Comparators in CMOS 0.35μm Technology”, Microelectronics Reliability, Vol. 44, No. 4, pp. 657-664, 2003.
- T. Kobayashi, K. Nogami, T. Shirotori, Y. Fujimoto and O. Watanabe, “A Current-Mode Latch Sense Amplifier and a Static Power Saving Input Buffer for Low-Power Architecture”, Proceedings of Symposium on VLSI Circuits Digest of Technical Papers, pp. 28-29, 1992.
- F. Silveira, D. Flandre and P.G.A. Jespers, “A g/Sub m//I/sub D/ base Methodology for the Design of CMOS Analog Circuits and its Application to the Synthesis of a Silicon-on-Insulator Micropower OTA”, IEEE Journal of Solid-State Circuits, Vol. 31, No. 9, pp. 1314-1319, 1996.
- Behzad Razavi, “The Strong ARM Latch A Circuit for all Seasons”, IEEE Solid-State Circuits Magazine, Vol. 7, No. 2, pp. 12-17, 2015.
- Shankar, G. Vasudeva and J.R. Girish, “Design of High Performance CMOS Comparator using 90nm Technology”, International Journal of Modern Trends in Engineering and Research, Vol. 3, No. 5, pp. 333-337, 2016.
- Nikhila Paruchuri, Maya S. Patil and K. Ramesh Babu, “Design of a Low-Voltage, Power and Double Tail Comparator Using CNTFET”, International Journal of Advance Engineering and Research Development, Vol. 1, No. 9, pp. 113-124, 2014.
Abstract Views: 301
PDF Views: 1