ICTACT Journal on Microelectronics

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Overview of MEMS Sensors and Associated Aspects


Affiliations
1 Systems Engineering Group, ISRO Satellite Centre, Bangalore, India
     

   Subscribe/Renew Journal


MEMS technology is pervading in all domains ranging from commercial to strategic sectors so it is imperative that application oriented development encompassing fabrication, characterization, assembly and packaging aspects to be looked into to get the reliable product. This article details the overview of MEMS sensors and various aspects such as thin film process, process characterization tools, assembly along with challenges in realization are presented. Reduction in measurement inaccuracy is extremely important and main parameters associated with the sensors are explained.

Keywords

MEMS, Sensors, Fabrication Process, Assembly.
Subscription Login to verify subscription
User
Notifications
Font Size

  • G.K. Ananthasuresh, K.J. Vinoy, S. Gopalakrishnan, K.N.Bhat and V.K. Aatre,“Micro and Smart Systems”, Wiley India, 2010.

  • Sunipa Roy and Chandan Kumar Sarkar, “MEMS and Nanotechnology for Gas Sensors”, 1st Edition, CRC Press 2016.

  • Kamaljeet Singh, “Substrate Material Considerations in MEMS Processes for RF Applications”, Nano and Microsystems Technology, Vol. 19, No. 7, pp. 428-431, 2017.

  • Kamaljeet Singh and A.V. Nirmal, “Reliability Aspects in RF-MEMS Circuits for Space Applications”, Journal of Engineering and Technology Research, Vol. 4, No. 6, pp. 1-11, 2016.

  • Amit Saxena, Satya N Behera, Kamaljeet Singh and Paritosh Jain, “Process Optimization and Role of Process Parameters for Repeatable Metal Etching”, Proceedings of National Conference on Micro and Nano Fabrication, pp. 1-4, 2013.

  • R Osiander, M.A.G. Darren and J.L. Champion, “MEMS and Microstructures in Aerospace Applications” , 1st Edition, CRC Press, 2005.

  • Janusz Bryzek,“Principles of MEMS: Handbook of Measuring System Design”, John Wiley and Sons, 2011.

  • Kamaljeet Singh, A.V. Nirmal and S.V. Sharma, “Investigation of Drift Phenomena Observed in Platinum Thin Film based Temperature Sensor for Metrological Applications”, Proceedings of 2nd National Conference on Recent Developments in Electronics, pp. 12-16, 2017.

  • Kamaljeet Singh and A.V. Nirmal, “Development and Characterization of RF-MEMS Shunt Switch at Ka-Band”, Proceedings of 8th International Conference on Smart Materials, Structures and Systems, pp. 31-32, 2017.

  • N. Yazdi, F Ayazi and K Najafi, “Micromachined Inertial Sensors”, Proceedings of IEEE, Vol. 86, No. 8, pp. 1640-1657, 1998.

  • Jan Grym, “Semiconductor Technologies”, InTech Publisher, 2010.

  • Mohamed Gad-El-Hak, “The MEMS Handbook” , 1st Edition, CRC Press, 2002.

  • P. Malshe, W.D. Brown, W.P. Eaton and W.M. Miller, “Challenges in the Packaging of MEMS” , International Journal of Microcircuits and Electronic Packaging, Vol. 22, No. 3, pp. 233-241, 1999.


Abstract Views: 273

PDF Views: 6




  • Overview of MEMS Sensors and Associated Aspects

Abstract Views: 273  |  PDF Views: 6

Authors

Kamaljeet Singh
Systems Engineering Group, ISRO Satellite Centre, Bangalore, India

Abstract


MEMS technology is pervading in all domains ranging from commercial to strategic sectors so it is imperative that application oriented development encompassing fabrication, characterization, assembly and packaging aspects to be looked into to get the reliable product. This article details the overview of MEMS sensors and various aspects such as thin film process, process characterization tools, assembly along with challenges in realization are presented. Reduction in measurement inaccuracy is extremely important and main parameters associated with the sensors are explained.

Keywords


MEMS, Sensors, Fabrication Process, Assembly.

References