Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Performance Analysis of Dwdm Optical Network with Dispersion Compensation Techniques for 4×8 Gbps Transmission System


Affiliations
1 Department of Electronics Engineering, Rajasthan Technical University, India
     

   Subscribe/Renew Journal


In this article, a new 4-channel dense wavelength division multiplexing (DWDM) optical transmission system model is proposed with dispersion compensation techniques. Dispersion compensation mechanism limits the pulse broadening effects of transmitted light in optical communication systems. To overcome dispersion problem; Pre, Post and Symmetrical dispersion compensation scheme are modeled, analyzed and compared for investigate the performance of DWDM system. The proposed model is designed for 8Gbps using non-return-to-zero (NRZ), return-to-zero (RZ) and Gaussian modulation format with erbium doped fiber amplifier (EDFA) over a length of 150km single mode fiber (SMF) and 30km dispersion compensation fiber (DCF). The performance of designed model is compared in terms of bit error rate (BER) & Q-Factor and it is observed that, the symmetrical dispersion compensation scheme with RZ pulse generator modulation gives best performance for long-haul transmission system.

Keywords

Bit Error Rate, Dense Wavelength Division Multiplexing, Dispersion Compensation Fiber, Erbium Doped Fiber Amplifier.
Subscription Login to verify subscription
User
Notifications
Font Size

  • B. Mukherjee, “WDM Optical Communication Networks: Progress and Challenges”, IEEE Journal on Selected Areas in Communications, Vol. 18, No. 10, pp. 1810-1824, 2000.
  • B. Chomycz, “Planning Fiber Optic Networks”, McGraw-Hill, 2000.
  • R. Ramaswami, K.N. Sivarajan and G.H. Sasaki, “Optical Networks”, Morgan Kaufmann, 2000.
  • P. Anuseetal and S. Singh, “Analysis of EDFA based 16-Channel C-band optical WDM System for Different Pumping Schemes”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 5, No. 6, pp. 4709-4715, 2016.
  • S. Semmalar and S. Malarkkan, “Output Signal Power Analysis in Erbium-Doped Fiber Amplifier with Pump Power and Length Variation using Various Pumping Techniques”, ISRN Electronics, Vol. 2013, pp. 1-6, 2013.
  • B.H. Choi, H.H. Park and M.J. Chu, “New Pump Wavelength of 1540-nm Band for Long-Wavelength-Band Erbium-Doped Fiber Amplifier (L-Band EDFA)”, IEEE Journal of Quantum Electronics, Vol. 39, No. 10, pp. 1272-1280, 2003.
  • R.S. Kaler, Ajay K Sharma and T.S. Kamal, “Comparison of Pre, Post and Symmetrical Dispersion Compensation Schemes for 10Gb/s NRZ Links using Standard and Dispersion Compensated Fibers”, Optics Communications, Vol. 209, No. 1-3, pp. 107-123, 2002.
  • P. Singh and R. Chahar, “Performance Analysis of Dispersion Compensation in Long Haul Optical Fiber using DCF”, International Journal of Engineering and Science, Vol. 3, No. 2, pp. 18-22, 2014.
  • Govind P. Agrawal, “Fiber Optics Communication Systems”, 3rd Edition, Wiley, 2002.
  • P. Neheeda, M. Pradeep and P.J. Shaija, “Analysis of WDM System with Dispersion Compensation Schemes”, Procedia Computer Science, Vol. 93, pp. 647-654, 2017.

Abstract Views: 356

PDF Views: 0




  • Performance Analysis of Dwdm Optical Network with Dispersion Compensation Techniques for 4×8 Gbps Transmission System

Abstract Views: 356  |  PDF Views: 0

Authors

M. L. Meena
Department of Electronics Engineering, Rajasthan Technical University, India
Deepika Meena
Department of Electronics Engineering, Rajasthan Technical University, India

Abstract


In this article, a new 4-channel dense wavelength division multiplexing (DWDM) optical transmission system model is proposed with dispersion compensation techniques. Dispersion compensation mechanism limits the pulse broadening effects of transmitted light in optical communication systems. To overcome dispersion problem; Pre, Post and Symmetrical dispersion compensation scheme are modeled, analyzed and compared for investigate the performance of DWDM system. The proposed model is designed for 8Gbps using non-return-to-zero (NRZ), return-to-zero (RZ) and Gaussian modulation format with erbium doped fiber amplifier (EDFA) over a length of 150km single mode fiber (SMF) and 30km dispersion compensation fiber (DCF). The performance of designed model is compared in terms of bit error rate (BER) & Q-Factor and it is observed that, the symmetrical dispersion compensation scheme with RZ pulse generator modulation gives best performance for long-haul transmission system.

Keywords


Bit Error Rate, Dense Wavelength Division Multiplexing, Dispersion Compensation Fiber, Erbium Doped Fiber Amplifier.

References