![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_open_medium.gif)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_restricted_medium.gif)
The Efficient Implementation to Optimize Power and Delay Using Data Selector
Subscribe/Renew Journal
The objective of this paper is designing a 16:1 multiplexer using logic gates and CMOS logic. In this research, we have investigated the delay and power modulations of 16:1MUX. This demonstrates that the CMOS technique takes lead as it uses decreased number of transistors, have less capacitances and faster than others. In this research a comparative work is done and made the simulated results and it illustrates the superior nature of CMOS logic design and it dissipates very decreased power and delay. The simulations for the proposed model are done by using Synopsys tool HSPICE under 32 nm BSIM 4 model card for bulk CMOS technology of PTM model and examined the results with varying voltages. The minimum and maximum delay and power dissipation results are 68.82ps, 92.16ps and 103.96 μ W, 1471.4 μ W respectively. The overall transistor count we got in the Multiplexer is 282 and this is simulated and we got output waveforms of the MUX by using the advanced tool called HSPICE and they are represented in the results section.
Keywords
Multiplexer, 2 × 1 Multiplexer, 4 × 1 Multiplexer, 8 × 1 Multiplexer, 16 × 1 Multiplexer, Delay, Power Dissipation.
Subscription
Login to verify subscription
User
Font Size
Information
- Anjum Aara and Sushant Jain, “Design and Implementation of CMOS and CNT based 2:1 Multiplexer at 32nm Technology”, International Research Journal of Engineering and Technology, Vol. 6, No. 8, pp. 548-552, 2019.
- Tripti Dua and Anju Rajput, “2:1 Multiplexer using Different Design Styles: Comparative Analysis”, STM Journal of Advancements in Robotics, Vol. 7, No. 3, pp. 5-13, 2020.
- N. Sreenivasa Rao, Y. Vishnuvardhan Reddy, G. Shivamanikanta and B. Vijaysree, “Design the 2x1 Mux with 2T Logic and Comparing the Power Dissipation and Area with Different Logics”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 4, No. 3, pp. 1284-1290, 2015.
- V. Vaishali, S. Raja Rajeshwari and C. Saravana Kumar, “A Study on Low Power Implementation of Multiplexer”, International journal of Emerging Technology in Computer Science and Electronics, Vol. 25, No. 5, pp. 316-319, 2018.
- Aishwarya Tambe, Snehal Bhakre and Sankit Karsa, “Design and Analysis of (2x1) and (4x1) Multiplexer Circuit in Quantum Dot Cellular Automata Approach”, International Journal of Innovative Technology and Exploring Engineering, Vol. 8, No. 6, pp. 277-281, 2019.
- Rajinder Tiwari, Anil Kumar and Preeta Sharan, “Design and Implementation of 4:1 Multiplexer for Reversible ALU using QCA”, Proceedings of International Conference on Micro-Electronics and Telecommunication Engineering, pp 191-196, 2018.
- Debika Chaudhuri, Atanu Nag, Sukanta Bose, Suchismita Mitra and Hemanta Ghosh, “Power and Delay Analysis of a 4 to 1 Multiplexer Implemented in Different Logic Style”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, No. 9, pp. 118-123, 2015.
- Yalla Haresh and Yelithoti Sravana Kumar, “Design and Operation of 4x1 Lower Power Multiplexer using Different Logics”, International Journal of Emerging Science and Engineering, Vol. 4, No. 8, pp. 36-39, 2017.
- Vikash Kumar Sharma and Shyam Akashe, “Power Efficient Design of 4:1 Multiplexer using Low Power Techniques”, International Journal of Modern Engineering and Management Research, Vol. 4, No. 4, pp. 44-49, 2016.
- Li Hua Jiang and Chuan Huang, “Design and Realization of Multiplexer Based on Schematic and VHDL Language”, Proceedings of IEEE International Conference on Optics, Photonics and Energy Engineering, pp. 273-276, 2010.
- Guvvapotula Sreekanth and B. Jeevan Rao, “Design of 8x1 Low Power Multiplexer by using Transmission Gates”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 8, No. 11, pp. 2465-2470, 2019.
- Abhishek Dixit, Saurabh Khandelwal and Shyam Akashe, “Design Low Power High Performance 8:1 Mux using Transmission Gate Logic (TGL)”, International Journal of Modern Engineering and Management Research, Vol 2, No. 2, pp. 14-20, 2014.
- Deepak Mittal and Amit Niranjan, “Designing of Multiplexer and de-Multiplexer using different Adiabatic Logic in 90nm Technology”, Proceedings of International Conference on Computing, Communication and Networking Technologies, pp. 1-9, 2018.
- Ankit Dalal and Ankur Atri, “A General Overview of Multiplexer and Demultiplexer”, International Journal of Research, Vol. 1, No. 10, pp. 1293-1298, 2014.
- M. Morris Mano and Michael D. Ciletti, “Digital Design”, 5th Edition, Pearson Education, 2011.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 269
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 0