ICTACT Journal on Microelectronics

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of MOSFET Aspect Ratio on Current Mirror Using Different Current Sources


Affiliations
1 Department of Electronics Engineering, University of Mumbai, India
     

   Subscribe/Renew Journal


A highly efficient current mirror circuit is the need of every analog integrated circuits. They are mainly used to bias amplifier stages in analog ICs. Current mirror circuit should provide constant, predictable and precise current. In order to do so reference current given to current mirror should be constant, predictable and precise. Objective of this paper is to discuss the various reference current generation schemes and their dependency on the Aspect Ratio of Current Mirror’s MOSFET. Current mirror circuit with Resistor based and MOSFET based reference current generation schemes is implemented in this paper and simulated for different values of Aspect Ratio of current Mirror’s MOSFET. Effect of change in Aspect Ratio of current mirror’s MOSFET on reference current value is compared for different current generation schemes to find which current generation scheme is more suitable for current mirror circuit using MOSFET.

Keywords

Current Mirror, Aspect Ratio, Reference Current, Current Generation Schemes.
Subscription Login to verify subscription
User
Notifications
Font Size

  • N. Domala and G. Sasikala, “Low Power Low Voltage Current Mirror for Analog and Mixed Signal Applications”, Proceedings of International Conference on Electronics, Communication and Aerospace Technology, pp. 1-11, 2020.

  • Y. He, M. Choi and Y.B. Kim, “A Compensation Technique for Threshold Mismatch in Sub-threshold Current Mirror”, Proceedings of International Conference on Microelectronics Design and Test, pp. 1-4, 2021.

  • B. Chunfeng, S. Xingyue, Q. Donghai and Z. Heming, “A Compact Low Voltage CMOS Current Mirror with High Output Resistance”, Proceedings of International Conference on IC Design and Technology, pp. 1-3, 2019.

  • H.A. Aghayan, “Wide Range Current Mirror Implemented with Triode Region Transistors”, Proceedings of International Conference on Electronics and Nanotechnology, pp. 138-142, 2020.

  • Gyan Prakash Pal, Rajesh Meh and Sadhana Pal, “Performance Analysis of Constant Current Source for Different Aspect Ratio”, Proceedings of IEEE International Conference on Computational Intelligence and Communication Technology, pp. 1-6, 2015.

  • Mannedra Singh and Rajkumar Sarma, “Design and Implementation of MOSFET based Folded Cascode Current Mirror”, Proceedings of International Conference on Intelligent Circuits and Systems, pp. 1-5, 2018.

  • Fei Yu, Ping Li, Lei Gao, Shuo Cai, Ke Gu and Weizheng Wang, “A Second Generation Current Controlled Current Conveyor Realization using Cascode Current Mirror”, Proceedings of International Conference on Communications, Circuits and Systems, pp. 1-4, 2018.

  • Gabriel Bonteanu and Arcadie Cracan, “A High-Gain Programmable Current Mirror for Large Bias Currents Generation”, Proceedings of International Conference on Electrical and Electronics Engineering, pp. 1-4, 2017.

  • Ritesh Kumar Rai, Ashish Gupta, Jitender Kumar and Amendra Bhandari, “Compensation in MOS Current Mirror Circuits”, Proceedings of International Conference on Recent Advancements in Management, Science, Technology, Education and Legal Issues, pp. 333-339, 2019.

  • D.K. Shedge, D.A. Itole, S.B. Dhonde, P.W. Wani and M.S. Sutaone, “Comparison of CMOS Current Mirror Sources”, International Journal on Recent Trends in Engineering and Technology, Vol. 8, No. 2, pp. 1-13, 2013.

  • B Razavi, “Design of Analog CMOS Integrated Circuits”, Tata Mcgraw Hill, 2002.

  • R.J. Baker, H.W. Li and D.E. Boyce, “CMOS Circuit Design, Layout and Simulation”, IEEE Press, 1998.


Abstract Views: 291

PDF Views: 0




  • Effect of MOSFET Aspect Ratio on Current Mirror Using Different Current Sources

Abstract Views: 291  |  PDF Views: 0

Authors

Faiz Rangari
Department of Electronics Engineering, University of Mumbai, India
Irfan Landge
Department of Electronics Engineering, University of Mumbai, India

Abstract


A highly efficient current mirror circuit is the need of every analog integrated circuits. They are mainly used to bias amplifier stages in analog ICs. Current mirror circuit should provide constant, predictable and precise current. In order to do so reference current given to current mirror should be constant, predictable and precise. Objective of this paper is to discuss the various reference current generation schemes and their dependency on the Aspect Ratio of Current Mirror’s MOSFET. Current mirror circuit with Resistor based and MOSFET based reference current generation schemes is implemented in this paper and simulated for different values of Aspect Ratio of current Mirror’s MOSFET. Effect of change in Aspect Ratio of current mirror’s MOSFET on reference current value is compared for different current generation schemes to find which current generation scheme is more suitable for current mirror circuit using MOSFET.

Keywords


Current Mirror, Aspect Ratio, Reference Current, Current Generation Schemes.

References