Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

The Enhancements In Storage Capacity And Long-term Data Retention Of Multidimensional Flash Memory In Modern Microcircuit Applications


Affiliations
1 SPC Free Zone, United Arab Emirates
     

   Subscribe/Renew Journal


Generally, flash memory is a type of permanent memory for computers in which the contents can be reprocessed or erased electronically. Compared to programmable read-only memory that can erase electricity, operations on it can be performed on modules located in different locations. Flash memory is much less expensive than EEPROM, which is why it has become a dominant technology. Especially, in situations, this stable and long-term data retention is required. Its use is allowed in various cases like digital audio players, photo and video cameras, mobile phones and smartphones, and specialized Android applications on the memory card. Additionally, it is also used on USB flash drives, traditionally used to store and transfer information between computers. The proposed model provides enhancements to the storage capacity of various flash memory modules. In a saturation point, the proposed model achieved 93.03% of NOR Memory management, 89.31% of NAND Memory management, 94.25% of Ferroelectric RAM Memory management, and 94.53% of Magnetic RAM Memory management, 96.05% of Ovonic Unified Memory management and 96.16% of Salcogenide RAM Memory management.

Keywords

Flash Memory, Permanent Memory, Read-Only Memory, EEPROM, Data Retention, USB Flash Drives
Subscription Login to verify subscription
User
Notifications
Font Size

  • Chyi Shiang Hoo, Kanesan Jeevan, Velappa Ganapathy and Harikrishnan Ramiah, “Variable-Order Ant System for VLSI Multi Objective Floorplanning”, Applied Soft Computing, Vol. 13, No. 7, pp. 3285-3297, 2013.
  • Jackey Z. Yan and Chris Chu, “Defer: Deferred Decision Making Enabled Fixed-Outline Floorplanning Algorithm”, IEEE Transactions on Computer Aided Design of Integrated Circuits and Systems, Vol. 29, No. 3, pp. 367-381, 2010.
  • Po Hsun Wu and Tsung Yi Ho, “Bus-driven Floorplanning with Thermal Consideration”, Integration the VLSI Journal, Vol. 16, No. 4, pp 369-381, 2013.
  • Teng Sheng Moh, Tsu Shuan Chang and S.L. Hakimi, “Globally Optimal Floorplanning for a Layout Problem”, IEEE Transactions on Circuits System I Fundamental Theory and Applications, Vol. 43, No. 5, pp. 713-720, 1996.
  • Chuan Lin, Hai Zhou and Chris Chu, “A Revisit to Floorplan Optimization by Lagrangian Relaxation”, Proceedings of IEEE/ACM International Conference on Computer Aided Design, pp. 164-171, 2006.
  • Jackey Z. Yan and Chris Chu, “SDS: An Optimal Slack Driven Block Shaping Algorithm in Fixed Outline Floorplanning”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 32, No. 2, pp. 175-188, 2013.
  • H. Jeon, Y.-B. Kim and M. Choi, “A Novel Technique to Minimize Standby Leakage Power in Nanoscale CMOS VLSI”, Proceedings of the International Conference on Instrumentation and Measurement Technology, pp. 1372-1375, 2009.
  • Kaushik Roy, “Leakage Current Mechanisms and Leakage Reduction Techniques in Deep-Sub micrometer CMOS Circuits”, Proceeding of the IEEE, Vol. 91, No. 2, pp. 305-327, 2003.
  • Cassondra Neau and Kaushik Roy, “Optimal Body Bias Selection for Leakage Improvement and Process Compensation Over Different Technology Generations”, IEEE International Symposium on Low-Power Electronics and Design, No.312, pp. 116-121, 2003.
  • Kyung Ki Kim, Yong-Bin Kim, Minsu Choi and Nohpill Park, “Leakage Minimization Technique for Nanoscale CMOS VLSI Based on Macro- Cell Modeling”, IEEE Design and Test of Computers, Vol. 24, No. 4, pp. 322-330, 2007.
  • Paul R. Gray, “Analysis and Design of Analog Integrated Circuits”, 4th Edition, Wiley, 1993.
  • Betty Lise Anderson and Richard L. Anderson, “Fundamentals of Semiconductor Devices”, McGraw-Hill, 2005.
  • Kyung Ki Kim and Yong-Bin Kim, “A Novel Adaptive Design Methodology for Minimum Leakage Power Considering PVT Variations on Nanoscale VLSI Systems”, IEEE Transactions on Very Large Scale Integrated Systems, Vol. 17, No. 4, pp. 517-528, 2009.
  • V. Muralitharan and M. Jagadeeswari, “An Enhanced Carry Elimination Adder for Low Power VLSI Implementation”, International Journal of Engineering Research and Applications, Vol. 2, No. 2, pp. 1477-1482, 2012.
  • N. R. Divya and K. Kannadasan, “Logic Complexity Reduction and VLSI Architecture for Image Compression using Conventional Adders”, International Journal of Electrical and Communication Engineering for Applied Research, Vol. 2, pp. 31-35, 2014.
  • N. R. Divya and K. Kannadasan, “Image compression using DA-DCT Logic Through VLSI structure with Power Enhancement Scheme”, International Journal of Graphics and Image Processing, Vol. 4, No. 1, pp. 32-37, 2014.
  • N. Do, “Scaling of Split-Gate Flash Memory with 1.05V Select Transistor for 28 nm Embedded Flash Technology”, Proceedings of IEEE International Workshop on Memory, pp. 1-3, 2018.
  • C. Duangthong, W. Phakphisut and P. Supnithi, “Capacity Enhancement of Asymmetric Multi-Level Cell (MLC) NAND Flash Memory using Write Voltage Optimization”, Proceedings of International Technical Conference on Circuits/Systems, Computers and Communications, pp. 1-4, 2019.
  • N. Shibata, “13.1 A 1.33Tb 4-bit/Cell 3D-Flash Memory on a 96-Word-Line-Layer Technology”, Proceedings of IEEE International Conference on Solid- State Circuits, pp. 210-212, 2019.
  • Y. Sugiyama, T. Yamada, C. Matsui and K. Takeuchi, “Reconfigurable SCM Capacity Identification Method for SCM/NAND Flash Hybrid Disaggregated Storage”, Proceedings of IEEE International Workshop on Memory, pp. 1-4, 2017.
  • D.H. Kim, “A 1 Tb 4b/cell 5th-Generation 3D-NAND Flash Memory with 2ms tPROG, 110us tR and 1.2Gb/s/pin Interface”, Proceedings of IEEE International Workshop on Memory, pp. 1-4, 2021.
  • D. Kim and S. Kang, “Partial Page Buffering for Consumer Devices with Flash Storage”, Proceedings of IEEE International Conference on Consumer Electronics, pp. 177-180, 2013.
  • N. Shibata, “13.1 A 1.33Tb 4-bit/Cell 3D-Flash Memory on a 96-Word-Line-Layer Technology”, Proceedings of IEEE International Conference on Solid-State Circuits, pp. 210-212, 2019.
  • M. Fukuchi, S. Suzuki, K. Maeda, C. Matsui and K. Takeuchi, “BER Evaluation System Considering Device Characteristics of TLC and QLC NAND Flash Memories in Hybrid SSDs with Real Storage Workloads”, Proceedings of IEEE International Symposium on Circuits and Systems, pp. 1-4, 2021.

Abstract Views: 166

PDF Views: 0




  • The Enhancements In Storage Capacity And Long-term Data Retention Of Multidimensional Flash Memory In Modern Microcircuit Applications

Abstract Views: 166  |  PDF Views: 0

Authors

Ajay Mathew
SPC Free Zone, United Arab Emirates

Abstract


Generally, flash memory is a type of permanent memory for computers in which the contents can be reprocessed or erased electronically. Compared to programmable read-only memory that can erase electricity, operations on it can be performed on modules located in different locations. Flash memory is much less expensive than EEPROM, which is why it has become a dominant technology. Especially, in situations, this stable and long-term data retention is required. Its use is allowed in various cases like digital audio players, photo and video cameras, mobile phones and smartphones, and specialized Android applications on the memory card. Additionally, it is also used on USB flash drives, traditionally used to store and transfer information between computers. The proposed model provides enhancements to the storage capacity of various flash memory modules. In a saturation point, the proposed model achieved 93.03% of NOR Memory management, 89.31% of NAND Memory management, 94.25% of Ferroelectric RAM Memory management, and 94.53% of Magnetic RAM Memory management, 96.05% of Ovonic Unified Memory management and 96.16% of Salcogenide RAM Memory management.

Keywords


Flash Memory, Permanent Memory, Read-Only Memory, EEPROM, Data Retention, USB Flash Drives

References