International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Evaluation of Human Exposure to Vibration Subjected to Active Suspension Actuators


Affiliations
1 Dept. of Mechatronics Engg., SRM University, Tamil Nadu, India
2 Dept. of Mech. Engg., Rajalakshmi Engg. College, Tamil Nadu, India
 

   Subscribe/Renew Journal


This paper details the assessment of human response to vibration through modelling of seated human body using seven degrees of freedom lumped mass model. Continued human exposure to chronic vibrations may subsequently leads to person’s discomfort. To avoid this discomfort, an active suspension with combination of electro-hydraulic, pneumatic or air spring actuator is introduced between sprung mass and the unsprung mass which is controlled by a PID controller. For the simulation, ISO D-class road is given as input for the designed Matlab Simulink model and the results were compared. The simulation result shows that air spring actuators based active suspension can effectively attenuate the vertical vibration acceleration and increase the riding comfort.

Keywords

Human Body, Lumped Mass, Vibration Control, Active Suspension, Hydraulic and Pneumatic Actuator.
User
Subscription Login to verify subscription
Notifications
Font Size

  • A.M. Abd-El-Tawwab. 2013. Theoretical and experimental fuzzy control on vehicle pneumatic semiactive suspension system, J. American Science, 9(1), 498-507.

  • J.S. Chiou and M.T. Liu. 2009. Using fuzzy logic controller and evolutionary genetic algorithm for automotive active suspension system, Int. J. Automotive Tech., 10(6), 703-710. https://doi.org/10.1007/s12239-009-0083-4.

  • A. Podzorov and V. Prytkov. 2011. The vehicle ride comfort increase at the expense of semi-active suspension system, J. KONES Powertrain and Transport, 18(1).

  • A. Agharkakli, U.S. Chavan and S. Phvithran. 2012. Simulation and analysis of passive and active suspension system using quarter car model for non uniform road profile, Int. J. Engg. Research and Applications, 2(5), 900-906.

  • D.M. Barbu, I. Barbu and C. Drugă. 2007. Theoretical considerations concerning the human body behaviour in a vibrational medium, Annals of the Oradea University, Fascicle of Management and Tech. Engg., 6(16), 812-820.

  • C.C. Liang and C.F. Chiang. 2008. Modeling of a seated human body exposed to vertical vibrations in various automotive postures, Industrial Health, 46, 125-137. https://doi.org/10.2486/indhealth.46.125.

  • S. Badran, A. Salah, W. Abbas and O.B. Abouelatta. 2012. Design of optimal linear suspension for quarter car with human model using genetic algorithms, The Research Bulletin of Jordan ACM, 2(2), 42-51.

  • Q. Zhao, Y. Chen and H. Feng. 2011. Vehicle seat suspension vibration reduction based on CMAC and PID compound control, Int. Conf. Transportation, Mech., and Electrical Engg., Chang Chun, China.

  • H. Yanquan, L. Shaojun, Z. Hao and C. Dan. 2006. Fuzzy control of vehicle semi-active seat suspension using magneto-rheological damper, Automobile Engg., (7), 667-670.

  • X. Song and M. Ahmadian. 2004. Study of semi-active adaptive control algorithms with magnetorheological seat suspension, SAE Int., 1648-1661.

  • L. Huiying, G. Yuxian and Z. Chao. 2006. Active control and system simulation of vertical vibration in a vehicle seat, China Mech. Engg., 17(12), 1227-1230.

  • P.E. Boileau and SS. Rakheja. 1998. Whole-body vertical bio-dynamic response characteristics of the seated vehicle driver measurement and model development, Int. J. Industrial Ergonomics, 22, 449-472. https://doi.org/10.1016/S0169-8141(97)00030-9.

  • M. Presthus. 2002. Derivation of Air Spring Model Parameters for Train Simulation, Master Thesis, Lulea University of Tech., Sweden.

  • Zulfatman and M.F. Rahmat. 2009. Application of self-tuning fuzzy PID controller on industrial hydraulic actuator using system identification approach, Int. J. Smart Sensing and Intelligent Systems, 2(2), 246-261.

  • J.S. Lin and I. Kanellakopoulos. 1997. Nonlinear design of active suspensions, Contr. Syst. Mag., 17, 45-59. https://doi.org/10.1109/37.588129.

  • M. Senthil kumar and S. Vijayarangan. 2007. Analytical and experimental studies on active suspension system of light passenger vehicle to improve ride comfort, Mechanika,3(65), 34-41.

  • J. Lin, R.J. Lian, C.N. Huang and W.T. Sie. 2009. Enhanced fuzzy sliding mode controller for active suspension systems, Mechatronics, 19, 1178-1190. https://doi.org/10.1016/j.mechatronics.2009.03.009.

  • V. Gavriloski and J. Jovanova. 2010. Dynamic behavior of an air spring elements, 4-5, 24-27.

  • G. Quaglia and M. Sorli. 2001. Air suspension dimensionless analysis and design procedure, Veh. Syst. Dyn., 35, 443-475. https://doi.org/10.1076/vesd.35.6.443 .2040.

  • K. Ramji, A. Gupta, V.H. Saran, V.K. Goel, and V.Kumar. 2004. Road roughness measurements using PSD approach, J. Institution of Engineers, 85, 193-201.

  • Int. Organization for Standardization. 1997. Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements, ISO 2631-1.

  • C. Kaneko and T. Hagiwara. 2005. Scaling and evaluation of wholebody vibration by the category judgment method, Yamaha Motor Tech. Review, 1, 20.

  • M. Senthikumar and Vijayarangan. 2006. Linear quadratic regulator controller design for active suspension system for random road surfaces, J. Scientific and Research, 65, 213-226.


Abstract Views: 348

PDF Views: 172




  • Evaluation of Human Exposure to Vibration Subjected to Active Suspension Actuators

Abstract Views: 348  |  PDF Views: 172

Authors

R. Rajalakshmi
Dept. of Mechatronics Engg., SRM University, Tamil Nadu, India
S. Rajesh Kumar
Dept. of Mechatronics Engg., SRM University, Tamil Nadu, India
J. Thiyagarajan
Dept. of Mechatronics Engg., SRM University, Tamil Nadu, India
A. Vinothkumar
Dept. of Mech. Engg., Rajalakshmi Engg. College, Tamil Nadu, India

Abstract


This paper details the assessment of human response to vibration through modelling of seated human body using seven degrees of freedom lumped mass model. Continued human exposure to chronic vibrations may subsequently leads to person’s discomfort. To avoid this discomfort, an active suspension with combination of electro-hydraulic, pneumatic or air spring actuator is introduced between sprung mass and the unsprung mass which is controlled by a PID controller. For the simulation, ISO D-class road is given as input for the designed Matlab Simulink model and the results were compared. The simulation result shows that air spring actuators based active suspension can effectively attenuate the vertical vibration acceleration and increase the riding comfort.

Keywords


Human Body, Lumped Mass, Vibration Control, Active Suspension, Hydraulic and Pneumatic Actuator.

References





DOI: https://doi.org/10.4273/ijvss.9.2.01