International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Light Weight Freight Rolling Stock Bogie Frame:Design Methodology Validated with Field Oscillation Trials


Affiliations
1 Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India
 

   Subscribe/Renew Journal


Indian railway has improved the laden to tare weight ratio by producing lighter as well as higher strength bogie frame of freight rolling stock. Bogie frame is the crucial component of the rail vehicle which carries static load in the form of gross weight and dynamic loads arising from various track and wheel irregularities. The three piece freight vehicle bogie frame comprises two side frames and one bolster. The side frame; fitted with three piece bogie frame and responsible for the ride quality of the freight vehicle, is considered in present study. The locations suitable for weight reduction are found by finite element analysis (FEA), using side frame solid model in MSC FEA environment. International standards of the association of American railroad (AAR specification M-203) load cases and boundary conditions are deployed for analysis in the context of the operating scenario of Indian railways. Typical Indian railway track signatures are used as input for transient analysis. Time dependent stresses at critical speeds are used for fatigue strength evaluation as per Goodman diagram. The modified design is approx. 13.90% lighter and sustains 25.00 ton axle load in comparison of earlier 22.00 ton. Suggested topological changes have been compared by using frequencies of the initial and modified designs. Further, based on Indian railways running conditions, actual assessment and trial of the modified design bogie frame prototype has been carried out by Research Designs and Standards Organisation (RDSO). The results of the trial are found to be satisfactory and within the prescribed range.

Keywords

Rail Vehicle, Side Frame, Axle Load, Solid Model, Goodman Diagram, Fatigue Strength.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Truck Side Frame, Cast or Structural Design and Testing Specification, Association of American Railroad (AAR) M-203, 2007.

  • Oscillation Trials of 25 t Axle Load Broad Gauge Bogie Open Wagon type GONDOLA 25t with up to Maximum Speed of 110 kmph in Empty and 85 kmph in Loaded Condition over CTC-PRDP Section of East Coast Railway, Report number MT-1383: 2014, Govt. of India, Ministry of Railways, Research Design and Standards Organisation, India.

  • R.K. Luo, B.L. Gabbitas and B.V. Brickle. 1996. Dynamic stress analysis of an open-shaped railway bogie frame, Engg. Failure Analysis, 3(1), 53-64.

  • Z. Ren, S. Sun, Q. Li and Z. Liu. 2011. Experimental studies of load characteristics of bogie frames for 350km/h EMUs, IMechE J. Rail & Rapid Transit, 226, 216-227. https://doi.org/10.1177/0954409711412012.

  • S. Stichel and K. Knothe. 1998. Fatigue life prediction for an S-train bogie, Vehicle Sys. Dyn. Supplement, 28, 390-403. https://doi.org/10.1080/00423119808969573.

  • D. Younesian, A. Solhmirzaei and A. Gachloo. 2009. Fatigue life estimation of MD36 and MD523 bogies based on damage accumulation and random fatigue theory, J. Mech. Sci. and Tech., 23, 2149-2156.

  • https://doi.org/10.1007/s12206-009-0622-y.

  • J.S. Kim. 2006. Fatigue assessment of tilting bogie frame for Korean tilting train: Analysis and static tests, Engg. Failure Analysis, 13, 1326-1337.

  • S. Dietz, H. Netter and D. Sachau. 1997. Fatigue life predictions by coupling finite element and multi body systems calculations, Proc. ASME Design Engg. Tech. Conf., 1-9.

  • Indian railways specification No. WD-17-CASNUB-22HS-BOGIE-92 (Revision-3) for CASNUB-22W, 22HS Cast Steel Bogies with Friction Damping Arrangement for Broad Gauge, 2006, RDSO, Ministry of Railways.

  • S. Shukla, R. Gupta and N.S. Vyas. 2010. Weight reduction in an Indian railway CASNUB bogie bolster considering fatigue strength, Int. J. Veh. Str. and Systems, 2(3), 102-109. http://dx.doi.org/10.4273/ijvss.2.3-4.03.

  • Programme of Tests to be Carried Out on Wagon with Steel Under Frame and Body (Suitable for Being Fitted With The Automatic Buffing and Draw Coupler) and on their Cast Steel Frame Bogies, ERRI B12/RP17, 1993, 7th Edition, European Rail Research Institute.

  • Casting Details, Castings, Steels, Association of American Railroad (AAR) - M-201, 2007.

  • J.E. Shigely. Mech. Engg. Design, McGraw-Hill Series in Mech. Engg., 10th Edition.

  • Motive Power Units, Bogie and Running Gear, Bogie Frame Structure Strength Tests, UIC 615-4, 1994, International Union of Railways.

  • V.K. Garg and R.V. Dukkipati. 1984. Dynamics of Railway Vehicle System.

  • Third Report of the Standing Criteria Committee, Revision-l, TG-CR-4.2.3-1, May 2013, Government of India, Ministry of Railways, Research Design and Standards Organisation, India.

  • UGS, NX 8.5, Users manual.

  • User guide MSC FEA software 2010.


Abstract Views: 562

PDF Views: 277




  • Light Weight Freight Rolling Stock Bogie Frame:Design Methodology Validated with Field Oscillation Trials

Abstract Views: 562  |  PDF Views: 277

Authors

S. Shukla
Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India
U. Kumar
Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India
S. K. Sharma
Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India
P. Gupta
Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India
A. Kumar
Govt. of India, Ministry of Railways, Research Designs and Standards Organisation, India

Abstract


Indian railway has improved the laden to tare weight ratio by producing lighter as well as higher strength bogie frame of freight rolling stock. Bogie frame is the crucial component of the rail vehicle which carries static load in the form of gross weight and dynamic loads arising from various track and wheel irregularities. The three piece freight vehicle bogie frame comprises two side frames and one bolster. The side frame; fitted with three piece bogie frame and responsible for the ride quality of the freight vehicle, is considered in present study. The locations suitable for weight reduction are found by finite element analysis (FEA), using side frame solid model in MSC FEA environment. International standards of the association of American railroad (AAR specification M-203) load cases and boundary conditions are deployed for analysis in the context of the operating scenario of Indian railways. Typical Indian railway track signatures are used as input for transient analysis. Time dependent stresses at critical speeds are used for fatigue strength evaluation as per Goodman diagram. The modified design is approx. 13.90% lighter and sustains 25.00 ton axle load in comparison of earlier 22.00 ton. Suggested topological changes have been compared by using frequencies of the initial and modified designs. Further, based on Indian railways running conditions, actual assessment and trial of the modified design bogie frame prototype has been carried out by Research Designs and Standards Organisation (RDSO). The results of the trial are found to be satisfactory and within the prescribed range.

Keywords


Rail Vehicle, Side Frame, Axle Load, Solid Model, Goodman Diagram, Fatigue Strength.

References





DOI: https://doi.org/10.4273/ijvss.9.4.10