International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Microstructural and Mechanical Investigations of Mg-based Alloys


Affiliations
1 Dept. of Mech. Engg., Maharaja Agrasen University, Baddi, Himachal Pradesh, India
2 Mech. Engg. Dept., Maharishi Markandeshwar (Deemed to be University), Mullana, Haryana, India
 

   Subscribe/Renew Journal


In the present work, an attempt has been made to study the microstructural and mechanical behaviour of Mg-alloy prepared by powder metallurgy process. Highly pure Mg powder is used for the fabrication of Mg-alloy at different additive percentages. The investigation of constituent phases was successfully completed for the Mg-alloy using standard X-ray diffractometers. Scanning electron microscopy was used for the morphological studies. Tensile strength and percentage elongation of Mg-alloys were also evaluated at room temperature. The minimum and maximum ultimate stress varies from 67 to 108MPa. The percentage elongation also increased 1.03 to 1.57%.

Keywords

Microstructure, Powder Metallurgy, Magnesium Alloy, Tensile Strength.
User
Subscription Login to verify subscription
Notifications
Font Size

  • B.L. Mordike and T. Ebert. 2001. Magnesium: properties-applications-potential, Material Sci. and Engg.; 302, 37-45. https://doi.org/10.1016/S0921-5093(00)01351-4.

  • H. Somekawa and T. Mukai. 2005. Effect of texture on fracture toughness in extruded AZ31, Scripta Materialia, 53(5), 541-545.

  • X.N. Gu, X.H. Xie, N. Li, Y.F. Zheng and L. Qin. 2012. In vitro and in vivo studies on a Mg-Sr binary alloy system developed as a new kind of biodegradable metal, Acta Biomat., 8, 2360-2374. https://doi.org/10.1016/j.actbio.2012.02.018.

  • I.S. Berglund, H.S. Brar, N. Dolgova, A.P. Acharya, B.G. Keselowsky, M. Sarntinoranont and M.V. Manuel. 2012. Synthesis and characterization of Mg-Ca-Sr alloys for biodegradable orthopedic implant applications, J. Biomed. Mat. Res., 100, 1524-1534. https://doi.org/10.1002/jbm.b.32721.

  • X. Zhang, G. Yuan, L. Mao, J. Niu and W. Ding. 2012. Bio-corrosion properties of as-extruded Mg-Nd-Zn-Zr alloy compared with commercial AZ31 and WE43 alloys, Materials Letters, 66, 209-211.

  • X. Gu, Y. Zheng, Y. Cheng, S. Zhong, T. Xi. 2009. In vitro corrosion and biocompatibility of binary magnesium alloys, Biomaterials, 30, 484-498. https://doi.org/10.1016/j.biomaterials.2008.10.021.

  • Y. Huang, W. Gan, K.U. Kainer and N. Hort. 2014. Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys, J. Magnesium and Alloys, 2, 1-7. https://doi.org/10.1016/j.jma.2014.01.005.

  • S. Tekumalla, S. Seetharaman, A. Almajid, M. Gupta 2015. Mechanical properties of magnesium-rare earth alloy systems - A review, Metals, 5, 1-39. https://doi.org/10.3390/met5010001.

  • L.C. Li, J.C. Gao and Y. Wang. 2004. Evaluation of cyto-toxicity and corrosion behaviour of alkali-heattreated magnesium in simulated body fluid, Surface Coating Tech., 185, 92-98. https://doi.org/10.1016/j.surfcoat.2004.01.004

  • G. Song and S. Song. 2010. A possible biodegradable magnesium implant material. Advanced Engg. Materials, 9, 298-302. https://doi.org/10.1002/adem.200600252.

  • L.L. Hench and I. Thompson. 2010. Twenty-first century challenges for biomaterials, J. Royal Society Interface, 7, S379-S391. https://doi.org/10.1098/rsif.2010.0151.focus.

  • http://www.mddionline.com/article/three-generations-biomaterials.

  • https://www.alliedmarketresearch.com/medical-implants-market.

  • B. Liu and Y.F. Zheng. 2011. Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron, Acta Biomat., 7, 1407-1420. https://doi.org/10.1016/j.actbio.2010.11.001.

  • H. Li, Y. Zheng and L. Qin. 2014. Progress of biodegradable metals, progress in natural science, Materials Int., 24, 414-422.

  • N. Li and Y. Zheng. 2013. Novel magnesium alloys developed for biomedical application - A Review, J. Material Sci. and Tech., 29, 489-502. https://doi.org/10.1016/j.jmst.2013.02.005

  • D. Ding. 2016. Opportunities and challenges for the biodegradable magnesium alloys as next-generation biomaterials, Regenerative Biomaterials, 79-86. https://doi.org/10.1093/rb/rbw003.

  • N. Sharma, T. Raj and K.K. Jangra. 2016. Microstructural evaluation of Ni Ti-powder, steatite, and steel balls after different milling conditions, Mat. and Manuf. Proc., 31, 628-632. https://doi.org/10.1080/10426914.2015.1004710.

  • M.N. Samani, A.R. Kamali and R. Mobarra. 2010. Phase transformation of Ni-15 wt. % B powders during mechanical alloying and annealing, Materials Letters, 64, 309-312. https://doi.org/10.1016/j.matlet.2009.10.070.

  • K.K. Mustafa. 2008. Magnesium and its alloys applications in automotive industry, Int. J. Adv. Manuf. Tech. 39, 851-865. https://doi.org/10.1007/s00170-007-1279-2.


Abstract Views: 318

PDF Views: 128




  • Microstructural and Mechanical Investigations of Mg-based Alloys

Abstract Views: 318  |  PDF Views: 128

Authors

Amit Singla
Dept. of Mech. Engg., Maharaja Agrasen University, Baddi, Himachal Pradesh, India
Neeraj Sharma
Mech. Engg. Dept., Maharishi Markandeshwar (Deemed to be University), Mullana, Haryana, India
Sushil Kumar
Dept. of Mech. Engg., Maharaja Agrasen University, Baddi, Himachal Pradesh, India

Abstract


In the present work, an attempt has been made to study the microstructural and mechanical behaviour of Mg-alloy prepared by powder metallurgy process. Highly pure Mg powder is used for the fabrication of Mg-alloy at different additive percentages. The investigation of constituent phases was successfully completed for the Mg-alloy using standard X-ray diffractometers. Scanning electron microscopy was used for the morphological studies. Tensile strength and percentage elongation of Mg-alloys were also evaluated at room temperature. The minimum and maximum ultimate stress varies from 67 to 108MPa. The percentage elongation also increased 1.03 to 1.57%.

Keywords


Microstructure, Powder Metallurgy, Magnesium Alloy, Tensile Strength.

References





DOI: https://doi.org/10.4273/ijvss.10.3.06