Open Access
Subscription Access
Experimental Investigation and Optimization of SiC Abrasive Water Jet Machining of Aluminium Alloys
Subscribe/Renew Journal
Investigation of the parameters variation over the abrasive water jet machining of aluminium 2014 alloy was studied using the Taguchi technique. Traverse speed, standoff distance, pressure and mass flow rate were considered as the process parameters and were varied at three levels. The depth of cut was taken as the response, and it was measured and analysed statistically. The optimal parameters to achieve the maximum depth of cut were identified with the main effect plot. Most influencing parameters over the depth of cut were identified with the analysis of variance and response table. A mathematical relationship was developed to predict the depth of cut.
Keywords
Water Jet Machining, Aluminium Alloy, Taguchi Methodology, Depth of Cut, Optimization.
User
Subscription
Login to verify subscription
Font Size
Information
- H. Hocheng and K.R. Chang. 1994. Material removal analysis in abrasive water jet cutting of ceramic plates, J. Materials Proc. Tech., 40(3-4), 287-304. https://doi.org/10.1016/0924-0136(94)90456-1.
- G.S. Choi and G.H. Choi. 1997. Process analysis and monitoring in abrasive water jet machining of alumina ceramics, Int. J. Machine Tools and Manu., 37(3), 295-307. https://doi.org/10.1016/S0890-6955(96)00049-1.
- A.W. Momber and R. Kovacevic. 1997. Test parameter analysis in abrasive water jet cutting of rocklike materials. Int. J. Rock Mechanics and Mining Sci., 34(1), 17-25. https://doi.org/10.1016/S1365-1609(97)80030-5.
- H. Hocheng, H.Y. Tsai, J.J. Shiue and B. Wang. 1997. Feasibility study of abrasive-water jet milling of fibrereinforced plastics, J. Manuf. Sci. and Engg., 119(2), 133-142. https://doi.org/10.1115/1.2831088.
- J. Wang and W.C. Wong. 1999. A study of abrasive water jet cutting of metallic coated sheet steels, Int. J. Machine Tools and Manuf., 39(6), 855-870. https://doi.org/10.1016/S0890-6955(98)00078-9.
- C.Z. Huang, R.G. Hou, J. Wang and Y.X. Feng. 2006. The effect of high pressure abrasive water jet cutting parameters on cutting performance of granite, Key Engg. Materials, 304, 560-564. https://doi.org/10.4028/087849-986-5.560.
- M.A. Azmir, A.K. Ahsan and A. Rahmah. 2009. Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite, Int. J. Material Forming, 2(1), 37-44. https://doi.org/10.1007/s12289-008-0388-2.
- D.A. Axinte, D.S. Srinivasu, M.C. Kong and P.W.B. Smith. 2009. Abrasive water jet cutting of polycrystalline diamond: A preliminary investigation, Int. J. Machine Tools and Manufacture, 49(10), 797-803. https://doi.org/10.1016/j.ijmachtools.2009.04.003.
- J. Kechagias, G. Petropoulos and N. Vaxevanidis. 2012. Application of Taguchi design for quality characterization of abrasive water jet machining of trip sheet steels, Int. J. Advanced Manuf. Tech., 62(5-8), 635-643. https://doi.org/10.1007/s00170-011-3815-3.
- V. Gupta, P.M. Pandey, M.P. Garg, R. Khanna and N.K. Batra. 2014. Minimization of kerf taper angle and kerf width using Taguchi's method in abrasive water jet machining of marble, Proc. Materials Sci., 6, 140-149. https://doi.org/10.1016/j.mspro.2014.07.017.
- F. Kartal, M.H. Çetin, H. Gökkaya and Z. Yerlikaya. 2014. Optimization of abrasive water jet turning parameters for machining of low density polyethylene material based on experimental design method, Int. Polymer Proc., 29(4), 535-544. https://doi.org/10.3139/217.2925.
- P.P. Badgujar and M.G. Rathi. 2014. Taguchi method implementation in abrasive water jet machining process optimization, Int. J. Engg., and Advanced Tech., 3(5), 66-70.
- M. Uthaya kumar, M.A. Khan, S.T. Kumaran, A. Slota and J. Zajac. 2016. Machinability of nickel-based superalloy by abrasive water jet machining, Materials and Manuf. Proc., 31(13), 1733-1739. https://doi.org/10.1080/10426914.2015.1103859.
- F. Cenac, R. Zitoune, F. Collombet and M. Deleris. 2015. Abrasive water-jet milling of aeronautic aluminum 2024T3, Proc. IMechE Part L: J. Materials: Design and Applications, 229(1), 29-37.
- K.J. Aultrin and M.D. Anand. 2014. Experimental framework and study of AWJM process for an aluminium 6061 alloy using RSM, Control, Instrumentation, Communication and Computational Techn., 1432-1440.
- S. Vasanth, T. Muthuramalingam, P. Vinoth kumar, T. Geethapriyan and G. Murali. 2016. Performance analysis of process parameters on machining titanium (Ti-6Al-4V) alloy using abrasive water jet machining process, Proc. CIRP, 46, 139-142. https://doi.org/10.1016/j.procir.2016.04.072.
Abstract Views: 427
PDF Views: 170