International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Thermal Characteristics of a Cylindrical Heat Pipe using Multi-Layer Screen Mesh Wick


Affiliations
1 Dept. of Mech. Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, India
 

   Subscribe/Renew Journal


Heat pipe is the most widely used heat exchanging device in removal of heat from any given system at a faster rate. The thermal characteristics of heat pipe with single and multi-layered screen mesh wicks have been observed with two working fluids water and acetone. Heat pipe of length 250 mm and 12.7 mm outer diameter, made of copper material is used in all the trials of with and without wick structure. A 100 mesh stainless steel screen wire mesh is chosen as wick structure. Experiments were conducted at different heat loads and various inclinations with 100% fill ratio in evaporator. The performance is measured based on total thermal resistance and overall heat transfer coefficient. The heat pipe is found effective at 60° inclination with acetone as a working fluid and with four layered screen mesh wick. Uncertainty in thermal resistance and heat transfer coefficient is calculated for a heat input of 10W at 0° and 60° inclinations.

Keywords

Heat Pipe, Screen Wire Wick, Multi-Layer Screen Mesh, Uncertainty.
User
Subscription Login to verify subscription
Notifications
Font Size

  • A. Faghri. 2014. Heat pipes: Review, opportunities and challenges, Frontiers in Heat Pipe, 5, 1-48.

  • J. Raghuram, K.V.N.K. Phani kumar, G.V. Khiran, K. Snehith and S.B. Prakash. 2017. Thermal performance of a selected heat pipe at different tilt angles, Proc. IOP Conf. Series: Materials Sci. and Engg., 225(1). https://doi.org/10.1088/1757-899X/225/1/012043

  • S.S. Harikrishnan and V. Kotebavi. 2016. Performance study of solar heat pipe with different working fluids and fill ratios, Proc. IOP Conf. Series: Materials Sci. & Engg., 149(1). https://doi.org/10.1088/1757-899X/149/1/012224.

  • H. Jouhara, A. Chauhan, T. Nannou, S. Almahmoud, B. Delpech and L.C. Wrobel. 2017. Heat pipe based systems - Advances and applications, Energy, 128, 729-754. https://doi.org/10.1016/j.energy.2017.04.028.

  • S.E. Vannan, P.M. Shravan and A.S. Kumar. 2016. Experimental investigation of conventional heat pipe using different working fluids, Int. J. Engg. Trends and Tech., 38(7), 352-354. https://doi.org/10.14445/22315381/IJETT-V38P264.

  • A.K. Mozumder, A.F. Akon, M.S.H. Chowdhury and S.C. Banik. 2010. Performance of heat pipe for different working fluid and fill ratio, J. Mech. Engg., 41(2), 96-102.

  • T. Tharayil, L.G. Asirvatham, V. Ravindran, S. Wongwises. 2016. Effect of filling ratio on the performance of a novel miniature loop heat pipe having different diameter transport lines, Applied Thermal Engg., 106, 588-600. https://doi.org/10.1016/j.applthermaleng.2016.05.125.

  • R. Kempers, D. Ewing, C.Y. Ching. 2006. Effect of number of mesh layers and fluid loading on the performance of screen meshes wicked heat pipes, Applied Thermal Engg., 26, 589-595. https://doi.org/10.1016/j.applthermaleng.2005.07.004.

  • J.H. Liou, C.W. Chang, C. Chao, S.C. Wong. 2010. Visualization and thermal resistance measurement for the sintered mesh-wick evaporator in operating flat-plate heat pipes, Int. J. Heat and Mass Transfer, 53, 14981506. https://doi.org/10.1016/j.ijheatmasstransfer.2009.11.046.

  • M. Mahdavi, S. Tiari, S. D. Schampheleire and S. Qiu. 2018. Experimental study of the thermal characteristics of a heat pipe, Experimental Thermal and Fluid Sci., 93, 292-304. https://doi.org/10.1016/j.expthermflusci.2018.01.003.

  • W.N. Septiadi, N. Putra, M. Juarsa1, I.P.A. Putra1 and R. Sahmura. 2013. Characteristics of screen mesh wick heat pipe with nano-fluid as passive cooling system, Atom Indonesia, 39(1), 24-31. https://doi.org/10.17146/aij.2013.220

  • J.H. Boo and H.G. Kim. 2017. Experimental study on the performance characteristics of a cylindrical heat pipe having a screen wick subject to multiple heat sources, Applied Thermal Engg., 126, 1209-1215. https://doi.org/10.1016/j.applthermaleng.2017.02.097.


Abstract Views: 388

PDF Views: 123




  • Thermal Characteristics of a Cylindrical Heat Pipe using Multi-Layer Screen Mesh Wick

Abstract Views: 388  |  PDF Views: 123

Authors

R. Sankar Rao
Dept. of Mech. Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, India
S. Bhanu Prakash
Dept. of Mech. Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, India

Abstract


Heat pipe is the most widely used heat exchanging device in removal of heat from any given system at a faster rate. The thermal characteristics of heat pipe with single and multi-layered screen mesh wicks have been observed with two working fluids water and acetone. Heat pipe of length 250 mm and 12.7 mm outer diameter, made of copper material is used in all the trials of with and without wick structure. A 100 mesh stainless steel screen wire mesh is chosen as wick structure. Experiments were conducted at different heat loads and various inclinations with 100% fill ratio in evaporator. The performance is measured based on total thermal resistance and overall heat transfer coefficient. The heat pipe is found effective at 60° inclination with acetone as a working fluid and with four layered screen mesh wick. Uncertainty in thermal resistance and heat transfer coefficient is calculated for a heat input of 10W at 0° and 60° inclinations.

Keywords


Heat Pipe, Screen Wire Wick, Multi-Layer Screen Mesh, Uncertainty.

References





DOI: https://doi.org/10.4273/ijvss.10.5.08