International Journal of Vehicle Structures and Systems

Open Access Open Access  Restricted Access Subscription Access

Effect of Mg, SiC and Fly Ash Particulates in Aluminium Alloy for Automotive Wheel Rim Applications


Affiliations
1 Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Sci., Chennai, India
2 Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Scis., Tamil Nadu, India
 

   Subscribe/Renew Journal


For the past few decades the wheels of an automobile are usually made out of alloy materials. Due to the increased demand for peculiarity and enhanced outlook, metal matrix composites can be used for the alloy wheels. They enhance the performance of the vehicle by reducing its weight and thereby increasing its fuel efficiency. Many literature works are initiated and progressed on design and development of automotive alloy wheels. There is a scope for enhancing their properties with reinforcements. This study focuses on manufacturing a novel metal matrix composite material comprising aluminium as metal matrix and magnesium, silicon carbide and fly ash as reinforcements. The newly fabricated composition is tested. The alloy wheel is further analysed using ANSYS. The analysis results are compared with that of the existing aluminium alloy. The obtained results confirm that the proposed metal matrix composite is a reliable replacement for the aluminium alloy.

Keywords

Alloy Wheels, Aluminium Metal Matrix Composite, Finite Element Analysis, Mechanical Testing.
User
Subscription Login to verify subscription
Notifications
Font Size

  • S. Ganesh and P. Periyasamy. 2014. Design and analysis of spiral wheel rim for four wheeler, Int. J. Engg, and Sci., 3(4), 29-37.

  • H.N. Kale, C.L. Dhamejani and D.S. Galhe. 2015. A review on materials used for wheel rims, Int. J. Advance Res. & Innovative Ideas in Education. 1(5), 241-243.

  • L. Jian, S. Huixue, S. Shaoming and L. Xinxin. 2013. Research on influencing factors of magnesium alloy wheels forging forming force, Applied Mechanics and Materials, 456, 65-68. https://doi.org/10.4028/www.scientific.net/AMM.456.65.

  • J. Prem, P. Raghupathi and A. Kalaiyarasan. 2016. Analysis of magnesium alloys wheel four wheeler, Int. J. Recent Scientific Research, 7(8), 13126-13130.

  • G. Dede, S. Yıldızhan, K. Ökten, A. Çalık, E. Uludamar and M. Özcanli. 2017. Investigation of stress and displacement distribution in advanced steel rims, Int. J. Automotive Engineering and Technologies, 1, 34-37.

  • S.O. Igbudu and D.A. Fadare. 2015. Comparison of loading functions in the modelling of automobile aluminium alloy wheel under static radial load, Open J. Applied Sci., 5, 403-413. https://doi.org/10.4236/ojapps.2015.57040.

  • T.S. Prasad, T. Krishnaiah, Md.J. Iliyas and J.M. Reddy. 2014. A review on modelling and analysis of car wheel rim using CATIA & ANSYS, Int. Innovative Sci. and Modern Engg., 2(6), 1-5.

  • K.S. Rao, M. Rajeshand and G.S. Babu. 2017. Design and analysis of alloy wheels, Int. Research J. Engg., and Tech, 4(6), 2036-2042.


Abstract Views: 293

PDF Views: 132




  • Effect of Mg, SiC and Fly Ash Particulates in Aluminium Alloy for Automotive Wheel Rim Applications

Abstract Views: 293  |  PDF Views: 132

Authors

Abdul Hafeez Asif
Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Sci., Chennai, India
V. Jayakumar
Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Scis., Tamil Nadu, India
Chintala Sai Virinchy
Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Sci., Chennai, India
K. Shanmuganandam
Dept. of Mech. Engg., Saveetha School of Engg., Saveetha Institute of Medical and Technical Sci., Chennai, India

Abstract


For the past few decades the wheels of an automobile are usually made out of alloy materials. Due to the increased demand for peculiarity and enhanced outlook, metal matrix composites can be used for the alloy wheels. They enhance the performance of the vehicle by reducing its weight and thereby increasing its fuel efficiency. Many literature works are initiated and progressed on design and development of automotive alloy wheels. There is a scope for enhancing their properties with reinforcements. This study focuses on manufacturing a novel metal matrix composite material comprising aluminium as metal matrix and magnesium, silicon carbide and fly ash as reinforcements. The newly fabricated composition is tested. The alloy wheel is further analysed using ANSYS. The analysis results are compared with that of the existing aluminium alloy. The obtained results confirm that the proposed metal matrix composite is a reliable replacement for the aluminium alloy.

Keywords


Alloy Wheels, Aluminium Metal Matrix Composite, Finite Element Analysis, Mechanical Testing.

References





DOI: https://doi.org/10.4273/ijvss.10.6.10