Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

The Influence of Electrode Polarity and Welding Current on Mechanical Properties of Submerged Arc Weld


Affiliations
1 Defence Metallurgical Research Laboratory, Hyderabad - 258, India
2 Welding Research Laboratory, University of Roorkee, Roorkee, India
     

   Subscribe/Renew Journal


An experimental study has been made on the effect of electrode polarity on macrostruclure and mechanical properties of multipass submerged arc welds. The influence of welding current with two polarities has been studied. The welds are made by using C-Mn filler wire and basic flux. Weld deposites were characterised on the basis of tensile properties, hardness measurements and charpy impact toughness. The study of macro structure of weld deposites shows that the amount of reheat refined weldmetal increases with decreasing welding current with DCEP than that observed with DCEN. Hardness survey on the transverse section along the vertical line of the weld deposite revealed that higher hardness occured in the coarse micro structural region than the reheat refined region of the weld deposite. The charpy V-notch impact results show better toughness in the welds deposited at lower level of current with DCEP than that observed at DCEN. Yield strength and ultimate tensile strength are higher with DCEN than that observed in case of DCEP.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 304

PDF Views: 4




  • The Influence of Electrode Polarity and Welding Current on Mechanical Properties of Submerged Arc Weld

Abstract Views: 304  |  PDF Views: 4

Authors

G. Madhusudhan Reddy
Defence Metallurgical Research Laboratory, Hyderabad - 258, India
P. K. Ghosh
Welding Research Laboratory, University of Roorkee, Roorkee, India
Ashok Khanna
Welding Research Laboratory, University of Roorkee, Roorkee, India

Abstract


An experimental study has been made on the effect of electrode polarity on macrostruclure and mechanical properties of multipass submerged arc welds. The influence of welding current with two polarities has been studied. The welds are made by using C-Mn filler wire and basic flux. Weld deposites were characterised on the basis of tensile properties, hardness measurements and charpy impact toughness. The study of macro structure of weld deposites shows that the amount of reheat refined weldmetal increases with decreasing welding current with DCEP than that observed with DCEN. Hardness survey on the transverse section along the vertical line of the weld deposite revealed that higher hardness occured in the coarse micro structural region than the reheat refined region of the weld deposite. The charpy V-notch impact results show better toughness in the welds deposited at lower level of current with DCEP than that observed at DCEN. Yield strength and ultimate tensile strength are higher with DCEN than that observed in case of DCEP.