International Journal of Agricultural Engineering

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Development and Evaluation of Tractor Operated Plastic Mulch Laying Equipment


Affiliations
1 Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, University of Agricultural Sciences, Raichur (Karnataka), India
     

   Subscribe/Renew Journal


A tractor operated plastic mulch laying equipment was developed to mechanize the conventional plastic mulching. A plastic mulch roller was mounted on the main frame of equipment and drip roll carrier assembly also mounted on main frame. The soil covering unit and press wheel assembly have been attached to it with the help of clamps. A 35 hp tractor was used as a power unit for both plastic mulching and drip laying operation. Various parameters such as soil moisture content, draft, fuel consumption and soil temperature were measured. The average soil moisture of the plastic mulched beds was 19.20, 19.30 and 19.20 % at forward speed of 2.0, 3.0 and 4.0 km h-1, respectively. The average values of draft were 3139, 3193 and 3222 N at forward speed of 2.0, 3.0 and 4.0 km h-1, respectively.

Keywords

Plastic Mulch Roller Units, Drip Roll Carrier Assembly, Soil Covering Unit, Press Wheel Assembly.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Heipner, A.S., Schmidt and Von, E.B. (2005). Comparison of plastic mulch films with different optical properties for soil covering in horticulture: test under simulated environmental conditions. J. Sci. & Food Agric., 85 : 539-548.

  • Jiménez, L., Martína, M. and Ibarrab, M. (2004). The effect of plastic mulch and row covers on the growth and physiology of cucumber: Australian J. Experi. Agric., 44 : 91-94.

  • Joel, F.R. (1995). Polymer science and technology: introduction to polymer science. 3rd Edn. Prentice Hall, Upper Saddle River, p: 4-9.

  • Kepner, R.A., Roy, Bainer and Barger, E.L. (2005).Principles of farm machinery.CBS Publishers and Distributers (Pvt.) Ltd., New Delhi. p: 133.

  • Scott, G. and Gilead, D. (1995). Degradable polymers: principles and applications. Kluwer Academic/Chapman and Hall.

  • Tarara, J.M. (2000). Microclimate modifications with plastic mulch.Hort. Sci:, 35 (2):169-180.


Abstract Views: 244

PDF Views: 0




  • Development and Evaluation of Tractor Operated Plastic Mulch Laying Equipment

Abstract Views: 244  |  PDF Views: 0

Authors

Siddesh Marihonnappanavara
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, University of Agricultural Sciences, Raichur (Karnataka), India
M. Veerangouda
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, University of Agricultural Sciences, Raichur (Karnataka), India

Abstract


A tractor operated plastic mulch laying equipment was developed to mechanize the conventional plastic mulching. A plastic mulch roller was mounted on the main frame of equipment and drip roll carrier assembly also mounted on main frame. The soil covering unit and press wheel assembly have been attached to it with the help of clamps. A 35 hp tractor was used as a power unit for both plastic mulching and drip laying operation. Various parameters such as soil moisture content, draft, fuel consumption and soil temperature were measured. The average soil moisture of the plastic mulched beds was 19.20, 19.30 and 19.20 % at forward speed of 2.0, 3.0 and 4.0 km h-1, respectively. The average values of draft were 3139, 3193 and 3222 N at forward speed of 2.0, 3.0 and 4.0 km h-1, respectively.

Keywords


Plastic Mulch Roller Units, Drip Roll Carrier Assembly, Soil Covering Unit, Press Wheel Assembly.

References