International Journal of Agricultural Engineering

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Study on Tractor Implement Combination and Optimum Field Capacity for some Selected Farms


Affiliations
1 Department of Farm Machinery and Power Engineering, Punjab University, Ludhiana Punjab, India
2 Department of Farm Machinery and Power Engineering, Facul ty of Agicul tural Engineering, Indira Gandhi Krishi Vishwavidyalaya, Raipur C.G., India
3 Department of Agriculture and Food Engineering, Indian Institute of Technology, Kharagpur W.B., India
4 Agricultural Mechanization Division, Central Institute of Agricultural Engineering, Bhopal M.P., India
     

   Subscribe/Renew Journal


In this study, the optimum size of tractor and optimum field capacity requirements of implements for three different farms i.e., Agricultural Engineering Farm (AEF), Adhartal Farm (AF), and Dusty Acre Farm (DAF) of Jawaharlal Nehru Krishi Vishwa Vidyalaya Jabalpur was analyzed. Primary data were obtained through log book, history book and field survey of the university farms. Results showed that an optimum hp requirement for AEF was maximum (138.59hp). For DAF and AF it was 101.19 and 124.92 hp, respectively. The optimum field capacity of plough for all the three farm varied between 0.23 - 0.46 ha/h, cultivator was between 0.82 - 1.40 ha/h, disk harrow was between 0.90 - 1.52 ha/h and for seed drill was 1.00 - 2.01 ha/h when the labour cost varies between Rs. 100 - 180. For the selected farms the size of plough ranged between 2bottom-30cm to 4 bottom-35cm, the size of the cultivator and seed drill varied 9 - 19 tynes and for disk harrow between 8 - 16 disk.

Keywords

Farm Equipment, Optimum Size, Power, Tractor
Subscription Login to verify subscription
User
Notifications
Font Size


Abstract Views: 311

PDF Views: 0




  • Study on Tractor Implement Combination and Optimum Field Capacity for some Selected Farms

Abstract Views: 311  |  PDF Views: 0

Authors

Apoorv Prakash
Department of Farm Machinery and Power Engineering, Punjab University, Ludhiana Punjab, India
R. K. Naik
Department of Farm Machinery and Power Engineering, Facul ty of Agicul tural Engineering, Indira Gandhi Krishi Vishwavidyalaya, Raipur C.G., India
Brajesh Nare
Department of Agriculture and Food Engineering, Indian Institute of Technology, Kharagpur W.B., India
N. S. Chandel
Agricultural Mechanization Division, Central Institute of Agricultural Engineering, Bhopal M.P., India

Abstract


In this study, the optimum size of tractor and optimum field capacity requirements of implements for three different farms i.e., Agricultural Engineering Farm (AEF), Adhartal Farm (AF), and Dusty Acre Farm (DAF) of Jawaharlal Nehru Krishi Vishwa Vidyalaya Jabalpur was analyzed. Primary data were obtained through log book, history book and field survey of the university farms. Results showed that an optimum hp requirement for AEF was maximum (138.59hp). For DAF and AF it was 101.19 and 124.92 hp, respectively. The optimum field capacity of plough for all the three farm varied between 0.23 - 0.46 ha/h, cultivator was between 0.82 - 1.40 ha/h, disk harrow was between 0.90 - 1.52 ha/h and for seed drill was 1.00 - 2.01 ha/h when the labour cost varies between Rs. 100 - 180. For the selected farms the size of plough ranged between 2bottom-30cm to 4 bottom-35cm, the size of the cultivator and seed drill varied 9 - 19 tynes and for disk harrow between 8 - 16 disk.

Keywords


Farm Equipment, Optimum Size, Power, Tractor