Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Performance Evaluation of Bullock Drawn Cotton Planter


Affiliations
1 Department of Farm Power and Machinery, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola (M.S.), India
2 Department of Farm Power and Machinery, Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani, India
     

   Subscribe/Renew Journal


A 3-row bullock drawn cotton planter was evaluated on field of the Department of Farm Power and Machinery, Dr. PDKV, Akola using NHH-44 variety of cotton. The average moisture content of soil was 33 per cent. The field performance tests conducted over an 0.182 ha area revealed that the average horse power for the planter was 0.467 for an average draft of 48.53 kgf and average speed of 2.6 km/hr. The theoretical field capacity, effective field capacity, field efficiency obtained for continuous operations of planter were 0.47 ha/day, 0.34 ha/day and 72.51 per cent, respectively. In view of the above performance it can be concluded that newly developed bullock drawn cotton planter is suitable for cotton planting.

Keywords

Spacing Adjustment, Gear Ratio, Hopper, Seed Plate, Ground Wheel.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Anonymous (1983). Test code and procedure for planter. Regional network for agriculture machinery, Philipines. RANAM: 67-97.
  • Gupta, M.L. and Vusta, D.K. and Verma, M.K. (1999). Development and evaluation of multicrop planter for hill regions, AMA, 30(1) : 17-19.
  • Kamble, A.K. (2001). Modification and testing of multipower operated cotton planter. M. Tech. Thesis, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola, M.S. (INDIA).
  • Kathirvel, K. and Maniram, R. (2003). Development and performance evaluation of till planter for cotton. AMA, 34(1) : 20-23.
  • Kathrivel, K., Shivaji, K.P. and Manian, R. (2001). Development and evaluation of till planter for cotton crop. Agric. Mechanization in Asia, Africa & Latin America, 32(1) : 23-27.
  • Sahay, J. (2002). Elements of agricultural engineering, Standard Publications, DELHI (INDIA).
  • Sharma, D.N., Bansal, N.K. and Jain, M.L. (1983). Design, development and testing of a Bullock Drawn single row seed cum fertilizer drill. Agric. Mechanization in Asia, Africa & Latin America, 14(2): 37-40.
  • Vaiyapuri, K. (2004). Studies on inter cropping unconventional green manures in irrigated hybrid cotton. Ph. D. Thesis, Agronomy. Department of Agronomy. Tamil Nadu Agricultural University, Coimbatore, T.N. (INDIA).

Abstract Views: 339

PDF Views: 0




  • Performance Evaluation of Bullock Drawn Cotton Planter

Abstract Views: 339  |  PDF Views: 0

Authors

S. H. Thakare
Department of Farm Power and Machinery, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola (M.S.), India
D. M. Kadam
Department of Farm Power and Machinery, Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani, India
V. V. Saraf
Department of Farm Power and Machinery, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola (M.S.), India

Abstract


A 3-row bullock drawn cotton planter was evaluated on field of the Department of Farm Power and Machinery, Dr. PDKV, Akola using NHH-44 variety of cotton. The average moisture content of soil was 33 per cent. The field performance tests conducted over an 0.182 ha area revealed that the average horse power for the planter was 0.467 for an average draft of 48.53 kgf and average speed of 2.6 km/hr. The theoretical field capacity, effective field capacity, field efficiency obtained for continuous operations of planter were 0.47 ha/day, 0.34 ha/day and 72.51 per cent, respectively. In view of the above performance it can be concluded that newly developed bullock drawn cotton planter is suitable for cotton planting.

Keywords


Spacing Adjustment, Gear Ratio, Hopper, Seed Plate, Ground Wheel.

References