Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Design and Development of a forced Flow Type Dryer for Medicinal and Aromatic Crops


Affiliations
1 Central Institute of Agricultural Engineering, Regional Centre, COIMBATORE (T. N.), India
     

   Subscribe/Renew Journal


Medicinal and aromatic crops like curry leaf, patchouli, senna etc. are traditionally dried under sun resulting in inferior quality produce. In order to achieve better drying in terms of quality and drying time, an attempt was made to design and develop a mechanical dryer of forced flow type based on preliminary laboratory studies on drying curry leaf. The overall dimension of the dryer was 900 x 900 x 16500 mm. The dryer consists of a drying chamber, plenum chamber, heating chamber and a blower driven by 2HP motor. The performance of the dryer was evaluated for drying curry leaves. Moisture content of curry leaves decreased from about 67 per cent to about 5 per cent (w.b.) in approximately 6 hours for drying 50 kg of fresh curry leaf. The thermal efficiency of the dryer was found to be 45.6 per cent and the heat utilisation factor was 0.32. The quality of the dried curry leaf in terms of volatile oil content, colour and rehydration ratio was found to be good.

Keywords

Forced Flow Dryer, Design, Development, Drying, Curry Leaf, Performance, Quality.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Algirdas, Raila, Albinas, Lugauskas, Aurelija, Kemzûraitë, Egidijus, Zvicevièius, Ona, Ragaþinskienë and Marija, Railienë (2009). Different drying technologies and alternation of mycobiots In the raw material of Hyssopus officinalis L. Ann. Agric. Environ. Med., 16:93–101.
  • Calixto, J.B. (2000). Efficacy, safety, quality control, market and regulatory guidelines for herbal medicines (phytotherapeutic agents). Braz. J. Med. Biol. Res., 33:179-189.
  • Ceankoplis,C.J. (1993). Transport process and unit operations. 3rd Ed.. Prentice Hall, Englewood Cliff s, 508-512 pp.
  • Chakravety, A. (1988). Post harvest technology of cereals, Pulses and Oilseeds, Oxford & IBH Publishing Co.Pvt. Ltd., New Delhi, 49-50pp.
  • Dawn, C.P. Ambrose and Naik, Ravindra (2014). Studies on the mechanical drying of curry leaf. Internat. J. Proc. & Post Harvest Technol., 8 (1):8-11.
  • Ehiem, J.C., Irtwange S.V. and Obetta, S.E .(2009).Design and development of an industrial fruit and vegetable dryer. Res. J. Appl.Sci., Engg. & Technol., 1 (2):44-53.
  • Grover, J. K., Yadav, S. and Vats, V. (2002).Medicinal plants of India with anti-diabetic potential, J. Enthnopharmocol., 1(1):81-100.
  • Jambor, J. and Czosnowska, E. (2002). Herbal medicines from fresh plants. Posteßpy Fitoterapii, 8 (1–2):2–5.
  • Khanum, F., Anilakumar, K.R., Sudarshana, K.K.R. and Viswanathan, K.R. (2000). Anticarcinogenic effects of curry leaves in dimethylhydrazine – treated rats. Plant Foods Hum. Nutr. 55:347-355.
  • Khanum, H., Chawdhury, S. and Paul, S. (2000). Hook worms infections as influenced by hygienic and socio-economic conditions in some rural areas of Bangladesh. Univ. J. Zool. Rajshahi Univ., 19:83-86.
  • Mahapatra, A.K. and Nguyen, C.N. (2007).Drying of medicinal plants. Acta Hort. (ISHS) 756:47-54.
  • Mohammed, Ghasemi, Jafarpour, M. and Mortazeinezhad, F. (2013). Effect of different drying methods on the quality and quantity of the essential oil of lemon balm (Melissa officinalis L.). Internat. J. Agric. Crop Sci., 6:501-504.
  • Moyler, D.A. (1994). Spices–recent advances. In : G. Charalambous (Ed.), Spices, herbs and edible fungi, 1-70 pp.
  • Mujumdar, A.S. and Devahastin, S. (2000). Fundamental principles of drying. In: Devahastin, S. (Ed) Mujumdar’s practical guide to industrial drying. Exergex. Vorp, Montreal. 1–22 pp.
  • Omanakutty, Amma M., Rajaraman, K., Sankarikutty, B. and Sumathikutty, M.A. (1984). Processing of curry leaves. Indian Food Packer, 38 (4):32-36.
  • Palaniswamy, U.R. (2001). Asian horticultural crops and human dietetics. Hort. Technol., 11:504-509.
  • Raila, A., Lugauskas, A., Kemzûraitë, A., Zvicevièius, E., Ragaþinskienë, O. and Railienë, M. (2009). Different drying technologies and alternation of mycobiots in the raw material of Hyssopus offi cinalis L. Ann. Agric. Environ. Med., 16:93-101.
  • Ranganna, S. (1986). Manual of analysis of fruit and vegetable products. Tata McGraw-Hill Publishing Company Limited, New Delhi, 978 pp.
  • Rocha, R. P., Melo, E. C. and Radünz, L. L. (2011). Influence of drying process on the quality of medicinal plants: A review. J. Med. Plants Res., 5 (33):7076-7084.
  • Shaw, M., Meda, V., Tabil, Jr. L. and Leduc, P. (2005). Development and trends in drying of herbs and specialty crops in western Canada. CSAE/SCGR 2005 Meeting Winnipeg, Manitoba, Canada, June 26–29, 2005.
  • Vinita, Puranik, D.K. Chauhan, Mishra, Vandana and Rai , G.K. (2012). Effect of drying techniques on the physicochemical and bioactive components of selected medicinal herbs. Ann. Phytomedicine, 1(2):23-29.

Abstract Views: 273

PDF Views: 0




  • Design and Development of a forced Flow Type Dryer for Medicinal and Aromatic Crops

Abstract Views: 273  |  PDF Views: 0

Authors

Dawn C. P. Ambrose
Central Institute of Agricultural Engineering, Regional Centre, COIMBATORE (T. N.), India
S. J. K. Annamalai
Central Institute of Agricultural Engineering, Regional Centre, COIMBATORE (T. N.), India
Ravindra Naik
Central Institute of Agricultural Engineering, Regional Centre, COIMBATORE (T. N.), India

Abstract


Medicinal and aromatic crops like curry leaf, patchouli, senna etc. are traditionally dried under sun resulting in inferior quality produce. In order to achieve better drying in terms of quality and drying time, an attempt was made to design and develop a mechanical dryer of forced flow type based on preliminary laboratory studies on drying curry leaf. The overall dimension of the dryer was 900 x 900 x 16500 mm. The dryer consists of a drying chamber, plenum chamber, heating chamber and a blower driven by 2HP motor. The performance of the dryer was evaluated for drying curry leaves. Moisture content of curry leaves decreased from about 67 per cent to about 5 per cent (w.b.) in approximately 6 hours for drying 50 kg of fresh curry leaf. The thermal efficiency of the dryer was found to be 45.6 per cent and the heat utilisation factor was 0.32. The quality of the dried curry leaf in terms of volatile oil content, colour and rehydration ratio was found to be good.

Keywords


Forced Flow Dryer, Design, Development, Drying, Curry Leaf, Performance, Quality.

References