International Journal of Agricultural Sciences

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Engineering Properties of Turmeric Crop for Development of a Digger


Affiliations
1 Department of Farm Machinery and Power Engineering, College of Agricultural Engineering Jawaharlal Nehru Krishi Vishwa Vidyalaya, Jabalpur (M.P.), India
     

   Subscribe/Renew Journal


Three variety of turmeric crop were selected for determination of physical and engineering properties for developing ischolar_main crop digger. Fresh turmeric crop sample was selected for determination of linear dimensions viz., length, width and thickness, geometric mean diameter, sphericity, surface area, bulk density and found as the average of 68.99, 35.76 and 24.72 mm, 37.55, 0.55, 4592.25 mm2 and 476.50 kg/mm2, respectively for Suparbha variety sample and 68.99, 35.76 and 24.72 mm, 38.59, 0.53, 4697.93 mm2 and 479.42 kg/mm2, respectively for Surma variety and 61.09, 32.12 and 23.25 mm, 34.30, 0.56, 3815.63 mm2 and 468.32 kg/mm2, respectively for Prathibha variety. The co-efficient of static friction for plywood, mild steel (MS), aluminium galvanized iron (GI) and stainless steel was found to be 0.34, 0.53, 0.43, 0.42 and 0.28, respectively in Supabha variety, 0.31, 0.52, 0.41, 0.0.39 and 0.26 in Surma variety and 0.37, 0.59, 0.51, 0.48 and 0.32 and Prathiba variety, respectively. The average peak load required for crushing and cutting of turmeric crop was found to be 438.49 N and 80.69N for Suparbha variety, 402.71N and 69.28N for Surma variety and 486.58N and 97.18N for Prathibha variety, respectively.

Keywords

Linear Dimension, Geometric Mean Diameter, Sphericity, Surface Area, Bulk Density.
Subscription Login to verify subscription
User
Notifications
Font Size


  • AOAC (1999). Official Methods of Analysis of the Association of Official Analytical Chemists Washington D.C. pp. 211.

  • Bahnasawy, A.H., EI-Haddad, Z.A., EI-Ansary, M.Y. and Sorour, H.M. (2004). Physical and mechanical properties of some Egyptian onion cultivars. J. Food Engg., 62: 255-261.

  • Ghaffari, H., Marghoub, N., Sheikhdarabadi, M.S., Hakimi, A. and Abbasi, F. (2013). Physical properties of three Iranian onion varieties. Internat. Res. J. Appl. Basic Sci., 7(9): 587593.

  • Krishandas, M. Indian Spice Economy -An Analytical Approach to the Production and Export Performance LAP Lambert Academic Publishing, 112.

  • Mohsenin, N.N. (1970). Physical properties and Animal Materials. Gordon and Breach Science Publishers. New York.

  • Mohsenin, N.N. (1986). Physical properties of plant and animal materials. Second revised. Gordon and Breach Sci. Publ., New York.

  • Olaoye, J.O. (2000). Some physical properties of castor nut relevant to the design of processing equipment. J. Agric. Engg. Res., 77(1) : 113-118.


Abstract Views: 184

PDF Views: 0




  • Engineering Properties of Turmeric Crop for Development of a Digger

Abstract Views: 184  |  PDF Views: 0

Authors

Narender
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering Jawaharlal Nehru Krishi Vishwa Vidyalaya, Jabalpur (M.P.), India
A. K. Shrivastava
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering Jawaharlal Nehru Krishi Vishwa Vidyalaya, Jabalpur (M.P.), India

Abstract


Three variety of turmeric crop were selected for determination of physical and engineering properties for developing ischolar_main crop digger. Fresh turmeric crop sample was selected for determination of linear dimensions viz., length, width and thickness, geometric mean diameter, sphericity, surface area, bulk density and found as the average of 68.99, 35.76 and 24.72 mm, 37.55, 0.55, 4592.25 mm2 and 476.50 kg/mm2, respectively for Suparbha variety sample and 68.99, 35.76 and 24.72 mm, 38.59, 0.53, 4697.93 mm2 and 479.42 kg/mm2, respectively for Surma variety and 61.09, 32.12 and 23.25 mm, 34.30, 0.56, 3815.63 mm2 and 468.32 kg/mm2, respectively for Prathibha variety. The co-efficient of static friction for plywood, mild steel (MS), aluminium galvanized iron (GI) and stainless steel was found to be 0.34, 0.53, 0.43, 0.42 and 0.28, respectively in Supabha variety, 0.31, 0.52, 0.41, 0.0.39 and 0.26 in Surma variety and 0.37, 0.59, 0.51, 0.48 and 0.32 and Prathiba variety, respectively. The average peak load required for crushing and cutting of turmeric crop was found to be 438.49 N and 80.69N for Suparbha variety, 402.71N and 69.28N for Surma variety and 486.58N and 97.18N for Prathibha variety, respectively.

Keywords


Linear Dimension, Geometric Mean Diameter, Sphericity, Surface Area, Bulk Density.

References