International Journal of Electrical Engineering

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

RX-232 Based Low Cost Data IO Card


Affiliations
1 West Bengal Financial Corporation, West Bengal, India
2 Electrical Engineering Dept., Kalyani Govt. Engineering College
     

   Subscribe/Renew Journal


This is the generation of Computer based Automation. Now a days many Electrical Equipments are basically computer controlled. If an equipment is designed which is computer controlled then it is too much easy to change the Set points of the equipments and also to monitor different parameter of the equipment. But computer does not give directly the data from its ports as our required format or configuration. So a Data IO Card is needed to get the computer data in parallel or our required format and also to send external data to computer. So to work with Data IO Card we need to purchase it which around Rs.10 Thousands and also facing problem to found our required configuration. That is why many of the time we don't think about interfacing between electrical equipment and computer. Here we designed a low cost RS- 232 based Data IO Card. This can do IN or OUT Data externally as our required format. This paper contains more emphasis in this topic.

Keywords

Computer Based Automation, Data IO Card, RS-232 Based Data IO Card
Subscription Login to verify subscription
User
Notifications
Font Size


  • M. Smolnikar and M. Mohorcic, (2008) “A Framework for Developing a Microchip PIC Microcontroller Based Applications”, Issue 2, Volume 5, February 2008, WSEAS TRANSACTIONS on ADVANCES in ENGINEERING EDUCATION. ISSN: 1790-1979.

  • M.M. Haque, M.K. Hossain, M.M. Ali and M.R.I. Sheikh, (2011) “Microcontroller Based Single Phase Digital Prepaid Energy Meter for Improved Metering and Billing System”, International Journal of Power Electronics and Drive System (IJPEDS) Vol.1, No.2, December 2011, pp. 139~147. ISSN: 2088-8694.

  • K.K. Reddy, P.G. Jagadeesh, and S.V. Reddy, (2011) “TRAFFIC SIGNALS GENERATION WITH BICOLOR LEDS USING PIC 18F SERIES MICROCONTROLLER”, International Journal of Embedded Systems and Applications (IJESA) Vol.1, No.2, December 2011.

  • X. Wang and W. Guo, (2009) “The Design of RS232 and CAN Protocol Converter Based on PIC MCU”, Computer and Information Science, www.ccsenet.org/journal.html, Vol.2, No.-3, August 2009.

  • S.C. Hsiung, (2007) “The Use of PIC Microcontrollers in Multiple DC Motors Control Applications”, Journal of Industrial Technology, Volume 23, Number 3 - July 2007 through September 2007.


Abstract Views: 572

PDF Views: 0




  • RX-232 Based Low Cost Data IO Card

Abstract Views: 572  |  PDF Views: 0

Authors

Mousam Ghosh
West Bengal Financial Corporation, West Bengal, India
Satadal Mal
Electrical Engineering Dept., Kalyani Govt. Engineering College

Abstract


This is the generation of Computer based Automation. Now a days many Electrical Equipments are basically computer controlled. If an equipment is designed which is computer controlled then it is too much easy to change the Set points of the equipments and also to monitor different parameter of the equipment. But computer does not give directly the data from its ports as our required format or configuration. So a Data IO Card is needed to get the computer data in parallel or our required format and also to send external data to computer. So to work with Data IO Card we need to purchase it which around Rs.10 Thousands and also facing problem to found our required configuration. That is why many of the time we don't think about interfacing between electrical equipment and computer. Here we designed a low cost RS- 232 based Data IO Card. This can do IN or OUT Data externally as our required format. This paper contains more emphasis in this topic.

Keywords


Computer Based Automation, Data IO Card, RS-232 Based Data IO Card

References