Open Access
Subscription Access
Open Access
Subscription Access
Exploratory Studies on Utilization of Lops and Tops of Poplar for Development of Fibre Board
Subscribe/Renew Journal
This work was initiated to explore the utility of lops and tops for composites. Medium density fibre board (MDF) was prepared using lops and tops of poplar. Boards were prepared at two pressure levels 17.5kg/cm2 and 21.0 kg/cm2 and at two pressing times (15 and 20 minutes). Phenol formaldehyde was used as binder at 8% and 10% loading levels. The main use of lops and tops of the poplar at industry level is as fuel for boilers. Physical properties except thickness swelling could not meet the standard 12406 (2003). Screw withdrawal could meet the standard for 8% and 10% resin loading.
Keywords
Fibre Board, Phenol Formaldehyde, Physical Properties, Mechanical Properties, Wax.
Subscription
Login to verify subscription
User
Font Size
Information
- CristianeInacio de CamposI. and Francisco Antonio Rocco Lahr (2004). Production and characterization of MDF using eucalyptus fibres and castor oil-based polyurethane resin. Mat. Res., 7 (3) : 421-425.
- Dix, B.,Thole, V. and Marutzky, R. (1999). Poplar and eucalyptus wood as raw material for wood-based panels Industrial end-uses of fast-grown species:Eurowood Technical Workshop. Proceedings. Florence, May 31st - June 1st.
- Hiziroglu, S., Bauchongkol, P., Fueangvivat, V., Soontonbura, W. and Jarusombuti, S. (2007). Selected properties of medium density fibreboard (MDF) panels made from Bamboo and Rice Straw. Forest Prod. J., 57(6) : 46-50.
- IS: 2380 (1981). Indian Standard methods of test for wood particle boards and boards from other lignocellulosic materials. Bureau of Indian Standards. 9, Bahadur Shah Zafar Marg, New Delhi, India.
- IS: 12406 (2003). Indian Standard Medium Density Fibre Boards for general purpose specification. Bureau of Indian Standards. 9, Bahadur Shah Zafar Marg, New Delhi, India.
- Philip, Ye X., James Julson, MonlinKuo, Al Womac and Deland Myers (2007). Properties of medium density fibreboards made from renewable biomass. Bioresource Technol., 98 : 1077-1084.
- Shukla, K.S., Shah, R.S. and Bagga, J.K. (1985). Suitability of Leucaenaleucocephala (Su-babul) for hard boards. Indian Forester, 111(3) : 140-144.
- Shukla, K.S. (1987). The influence of Populus deltoides bark in wood as raw materials for hardboard. Indian Forester, 113(6) : 409-417.
- Shukla, K.S., Chauhan, B.R.S. and Bist, J.P.S. (1987). Hardboard from unbarked Eucalyptus hybrid. Indian Forester, 113(3) : 185-190.
- Singh, S.P., Singh, J.P. and Rawat, S.S. (1995). Particleboard from Populus deltoides. J. Timber. Dev. Assoc. (Indian), 41 (4) 17-21.
- Singh, S.P., Singh, J.P. and Rawat, S.S. (1996). Utilization of bark from Populusdeltoidis for particleboard. J. Ind. Acad. Wood. Sci., 26-27 (1 &2) 15-19.
Abstract Views: 251
PDF Views: 0