Journal of the Association of Engineers, India

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Study of Glass Fibre Reinforced Polymer Surfaces Machined by Abrasive Water Jet Machining


Affiliations
1 Department of Mechanical Engineering, S.V.N.I.T., Surat, Gujarat, India
     

   Subscribe/Renew Journal


Glass fibre reinforced polymer composites are being used increasingly for numerous applications. Conventional machining of glass fibre reinforced polymers is difficult because of excessive tool wear, delamination, improper kerf properties, etc. In this paper, an experimental study of influence of abrasive water jet machining process parameters on surface roughness of glass fibre reinforced polymer is presented. Process parameters namely stand-off distance, water pressure, traverse rate and abrasive mass flow rate are considered in the present work. The influence of process parameters on surface roughness is investigated using analysis of variance approach. It is observed that water pressure and abrasive mass flow rate are the most significant factors in influencing surface roughness. A set of optimum process parameters is determined on the basis of analysis of experimental data. The experimental results are successfully verified by comparing with the available literature. A regression model is developed using multi-linear regression approach on the basis of experimental analysis.

Keywords

Abrasive Water Jet Machining, Glass Fibre Reinforced Polymer, Process Parameters, Surface Roughness.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Komanduri, R., Machining of Fiber-Reinforced Composites, Machining Science and Technology: An International Journal, Vol. 1, pp.113-152, 1997.

  • Ramulu, M. and Arola, D., The Influence of Abrasive Water jet Cutting Conditions on the Surface Quality of Graphite/Epoxy Laminates, International Journal of Machine Tools Manufacture., Vol. 34, pp.295–313, 1994.

  • Arola, D. and Ramulu, M., A Study of Kerf Characteristics in Abrasive Waterjet Machining of Graphite/Epoxy Composite, Journal of Engineering Materials and Technology, Vol. 118, pp.256-265, 1996.

  • Ramulu, M., Prasad, N. E., Malakondiah, G. and Guo, Z., Secondary Processing Effects and Damage Mechanisms in Continuous-Fiber Ceramic Composites, American Society for Testing and Materials, pp.274-288, 1997.

  • Lemma, E., Chen, L., Siores, E. and Wang, J., Study of Cutting Fiber-Reinforced Composites by Using Abrasive Water-Jet with Cutting Head Oscillation, Composite Structures, Vol. 57, pp.297–303, 2002.

  • Wang, J. and Liu H., Profile Cutting on Alumina Ceramics by Abrasive Waterjet Part 1: Experimental Investigation, Proceedings of the Institution of Mechanical Engineers, Vol. 220, pp.703-714, 2006.

  • Azmir, M., Ahsan, A. and Rahmah, A., Investigation on Abrasive Waterjet Machining of Kevlar Reinforced Phenolic Composite Using Taguchi Approach, Proceedings of International Conference on Mechanical Engineering (ICME 2007), Dhaka, Bangladesh, 2007.

  • Azmir, M. and Ahsan, A., A Study of Abrasive Water Jet Machining Process on Glass/ Epoxy Composite Laminate, Journal of Materials Processing Technology, Vol.209, pp.6168– 6173, 2009.

  • Haddad, M., Zitoune, R., Bougherara, H., Eyma, F. and Castanie, B., Study of Trimming Damages of CFRP Structures in Function of the Machining Processes and their Impact on the Mechanical Behaviour, Composites: Part B, Vol. 57, pp.136-143, 2014.


Abstract Views: 454

PDF Views: 4




  • Experimental Study of Glass Fibre Reinforced Polymer Surfaces Machined by Abrasive Water Jet Machining

Abstract Views: 454  |  PDF Views: 4

Authors

Pratik Bose
Department of Mechanical Engineering, S.V.N.I.T., Surat, Gujarat, India
Ajit Dhanawade
Department of Mechanical Engineering, S.V.N.I.T., Surat, Gujarat, India
Shailendra Kumar
Department of Mechanical Engineering, S.V.N.I.T., Surat, Gujarat, India

Abstract


Glass fibre reinforced polymer composites are being used increasingly for numerous applications. Conventional machining of glass fibre reinforced polymers is difficult because of excessive tool wear, delamination, improper kerf properties, etc. In this paper, an experimental study of influence of abrasive water jet machining process parameters on surface roughness of glass fibre reinforced polymer is presented. Process parameters namely stand-off distance, water pressure, traverse rate and abrasive mass flow rate are considered in the present work. The influence of process parameters on surface roughness is investigated using analysis of variance approach. It is observed that water pressure and abrasive mass flow rate are the most significant factors in influencing surface roughness. A set of optimum process parameters is determined on the basis of analysis of experimental data. The experimental results are successfully verified by comparing with the available literature. A regression model is developed using multi-linear regression approach on the basis of experimental analysis.

Keywords


Abrasive Water Jet Machining, Glass Fibre Reinforced Polymer, Process Parameters, Surface Roughness.

References





DOI: https://doi.org/10.22485/jaei%2F2016%2Fv86%2Fi3-4%2F130830