Open Access
Subscription Access
Open Access
Subscription Access
Stress Analysis of Smart Support for Process Pipeline Systems by CAESAR Software
Subscribe/Renew Journal
Process pipeline system designs are governed by Industrial or International Codes and Standards to transport the fluid, steam or air through the employed pipe system in plants of many industries. Such piping arrangements consist of components like pipes, different valves, flanges, different fittings, varying elbows, different gaskets, and further specialties. The code AS ME B31.3 for process design piping has been used throughout this study. This code is applied in refineries of petroleum, oil and gas industries, chemical plants, textile plants, semi-conductor plants, paper mills, and many other industrial plants. Here the objective is to clearly explain the flexibility characteristics, elemental forces and displacements and also the stress analysis that have been kept in agreeable limits as per typical standards for major load conditions like hydrostatic - HYD, sustained - SUS, operating - OPE and experimental - EXP cases. The study was conducted on nitrogen pipeline network of a process plant at Durgapur, West Bengal in India.
Keywords
Process Pipelines, Piping Support, Loading Conditions, Stresses, Deflections.
User
Subscription
Login to verify subscription
Font Size
Information
- Mazumdar, A., Jaman, H. and Das, S., Modification of Hunter’s Curve in the Perspective of Water Conservation, Journal of Pipeline Systems Engineering and Practice, Vol. 5, No. 1, pp. 04013007(1-9), 2013.
- Satyanarayana, T.V.V., Sreenivasulu, V. and Kiran, U.C., Modelling and stress analysis of flare piping, International Journal of Latest Trends in Engineering and Technology, Vol. 2, No. 1, pp. 219-225, 2013.
- Mandi, S., Stress analysis with critical review of supports for a steam pipeline of Sagardighi thermal power plant using Caesar Software, M.E. Thesis, School of Water Resources Engineering, Jadavpur University, Kolkata, India, 2015.
- Mondal, S., Stress analysis of steam pipelines of 2x100 MW Captive power plant by Caesar Software, M.E. Thesis, School of Water Resources Engineering, Jadavpur University, Kolkata, India, 2015.
- Mukherjee, B., Das, S. and Mondal, S., Behaviour of Stresses in Steam Pipelines of a Captive Power Plant under Various Loading Conditions: A Case Study, 103rd Indian Science Congress Conference, ISCA, University of Mysore, India, 2016.
- Mukherjee, B., Das, S. and Mazumdar, A., Stress analysis of smart support system for a steam pipeline of Sagardighi Thermal Power Plant, West Bengal, India, International Journal of Innovative and Emerging Research in Engineering, Vol. 4, No. 1, pp. 137146, 2017.
- Mukherjee, B., Pipeline design and analysis of distribution network of Dhapa water treatment plant, KMC by EPANET and HAMMER software, M.E. Thesis, School of Water Resources Engineering, Jadavpur University, Kolkata, India, 2012.
- Chatterjee, B., Pipeline transient analysis of Mejia Thermal Power Station, DVC by HAMMER Software, M.E. Thesis, School of Water Resources Engineering, Jadavpur University, Kolkata, India, 2011.
- Mukherjee, B., Das, S. and Mazumdar, A., TransientAnalysis of a Pipeline Networkfor Drinking Purpose in Assam, India, Journal of the Institution of Public Health Engineers, India, Vol. 2014-2015, No. 4, pp. 26-32, 2014.
- Alvarado, M., Rodr'yguez-Toral, M.A., Rosas, A. and Ayala, S., Decision-making on pipe stress analysis enabled by knowledge-based systems, Knowledge and Information Systems, Vol. 12, No. 2, pp. 255-278, 2007.
- Stawniczy, G., Bak, W.R. and Hau, G., Piping Stress-Strain Correlation for Seismic Loading, Journal of Pressure Vessel Technology, Vol. 110, No. 4, pp. 444-450, 1988.
- Mair, D., Stress Intensification Factors for Fabricated Lateral Piping Connections, Journal of Pressure Vessel Technology, Vol. 136, No. 6, pp. 061206, 2014.
- Sadd, M.H. and Avent, R.R., Stress Analysis and Stress Index Development for a Trunnion Pipe Support, Journal of Pressure Vessel Technology, Vol. 104, No. 2 , pp. 73-78, 1982.
- Sawa.T., Higurashi, N. andAkagawa, H., A Stress Analysis of Pipe Flange Connections, Journal of Pressure Vessel Technology, Vol. 113, No. 4, pp. 497-503, 1991.
- Josefson, B.L., Stress Redistribution During Annealing of a Multi-Pass Butt-Welded Pipe, Journal of Pressure Vessel Technology, Vol. 105, No. 2, pp. 165-170, 1983.
- Hinnant, C., Paulin, T., Becht, C. and Lock, W.S., Experimental Evaluation of the Markl Fatigue Methods and ASME piping stress Intensification factor, ASME 2014 Pressure Vessels and Piping Conference, Anaheim, California, USA, Vol. 3, pp.V003T03A025, 2014.
- Huang, K., Wu, J., Hu, M., Xiang, H. and Zhang, Z., Optimization and Stress Analysis of Underground Oil Pipelines in High and Steep Slope Areas, The Open Civil Engineering Journal, Vol. 9, pp. 477- 483, 2015.
- Feng, L., Gengyu, Z. and Haiyang, Q., Analytical Determination of Stress Indices and Stress Intensification Factor for an Extruded Nozzle of Super Pipe, ASME 2018 Pressure Vessels and Piping Conference, Prague, Czech Republic, pp. V06BT06A024, 2018.
- Bae, K.D., Kim, C.G., Kim, S.J., Lee, H.J. and Kim, Y.J.,AStudy of the Stress Intensity Factor and Crack opening Displacement Relationship Between Uniform Thickness pipe Bends and Non-Uniform Thickness Bends, ASME 2016 Pressure Vessels and Piping Conference, British Columbia, Canada, Vol. 6A, pp. V06AT06A022, 2016.
- Azuma, K., Li, Y., Hasegawa, K. and Shim, D.J., Stress Intensity Factor Solutions for Circumferential Surface Cracks With Large Aspect Ratios in Pipes Subjected to Global Bending, ASME 2016 Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, pp. V01AT01A012, 2016.
Abstract Views: 480
PDF Views: 2