Journal of Surface Science and Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Silicon Carbon Nitride Thin Films Produced by Magnetron Reactive Sputtering Physical Vapour Deposition:Structural, Chemical and Mechanical Characterisation


Affiliations
1 Laboratoire de Physique Fondamentale et Appliquee, UFR Sciences Fondamentales et Appliquees, Universite Nangui Abrogoua, 02 BP 801 Abidjan 02, Côte d'Ivoire
2 Ecole Supérieure Africaine des Technologies de l’Information et de la Communication (ESATIC), Abidjan, Côte d'Ivoire
3 C. R. P. Gabriel Lippmann, S. A. M., 41 rue du Brill, L-4422 Belvaux, Luxembourg
4 Institut Jean Lamour (IJL) CNRS UMR 7198, Universite de Lorraine, BP 239, F-54506 Vandoeuvre Cedex, France
     

   Subscribe/Renew Journal


Amorphous silicon carbon nitride films were deposited on silicon and WC-Co substrates by magnetron reactive sputtering in Ar/N2 gas mixture with carbon and silicon targets. The influence of experimental parameters on the films morphological, structural and mechanical properties was studied. The general morphology of the film is observed by SEM and TEM. EDXS and FTIR were used to determine the film chemical composition and the nature of chemical bonding. It was observed that C≡N bonds and nitrogen percentage in the film are promoted when the substrate is biased. The role of an underlayer and the influence of its nature on the film adhesion on WC/Co substrates were also studied. In this case, nanoscratch tests showed that a SiNx thin film could be an appropriate underlayer.

Keywords

Magnetron Sputtering, Silicon Carbon Nitride (SiCN), SEM, TEM, EDSX, FTIR, Scratch Tests.
Subscription Login to verify subscription
User
Notifications
Font Size


  • A. Y. Liu and M. L. Cohen, Science, 245, 841 (1989).

  • S. Muhl and J. M. Mendez, Diam. Relat. Mater., 8, 1809 (1999).

  • P. Kouakou, V. Brien, M. B. Assouar, V. Hody, M. Belmahi, H. N. Migeon and J. Bougdira, Plasma Process. Polym., 4, 210 (2007).

  • P. Kouakou, V. Brien, M. Belmahi, V. Hody, H. N. Migeon and J. Bougdira, Surf. Coat. Technol., in press.

  • L. C. Chen, C. Y. Yang, D. M. Bhusari, K. H. Chen, M. C. Lin, J. C. Lin and T. J. Chuang, Diam. Relat. Mater. 5, 514 (1996).

  • A. Badzian, T. Badzian, W. D. Drawl, R. Roy, Diam. Relat. Mater. 7, 1519 (1998).

  • L. C. Chen, K. H. Chen, S. L. Wei, P. D. Kichambare, J. J. Wu, T. R. Lu and C. T. Kuo, Thin Solid Films, 355, 112 (1999).

  • D. Sarangi, R. Sanjines and A. Karimi, Carbon, 42, 1107 (2004).

  • P. Gao, J. Xu, Y. Piao, W. Ding, D. Wang, X. Deng and C. Dong, Surf. Coat. Technol., 201, 5298 (2007).

  • H. Hoche, D. Allebrandt, M. Bruns, Ralf Riedel and C. Fasel, Surf. Coat. Technol., 202, 5567 (2008).

  • A. Qayyum, S. Zeb, S. Ali, A. Waheed, M. Zakaullah, Plasma Chemistry and Plasma Processing, 25 (2005) 551.

  • Y. Kusano, J. Evetts, R. Somekh and I. Hutchings, Thin Solid Films, 332 (1998) 56.

  • N. Mubumbila, P. Tessier, B. Angleraud and G. Turban, Surf. Coat. Technol., 151 (2002) 175.

  • A. Czyzniewski, W. Precht, M. Pancielejko, P. Myslinski and W. Walkowiak, Thin Solid Films, 317 (1998) 384.

  • A. Ricard, plasmas réactifs, SFV, ed. (1995).

  • J. Liu, F. Sun and H. Yu, Curr. Appl. Phys., 5 (2005) 625.

  • A. Champi, F. C. Marques and F. L. Freire, Diam. Relat. Mater. 13 (2004) 1538.

  • A. Champi and F. C. Marques, Thin Solid Films. 501 (2006) 362.

  • E. Xie, Z. Ma, H. Lin, Z. Zhang and D. He, Opt. Mater., 23, 151 (2003).

  • W. Zheng, N. Hellgren, H. Sjiistriim and J. Sundgren, Surf. Coat. Technol. 100, 287 (1998).

  • E. Broitman, N. Hellgren, O. Wänstrand, M. P. Johansson, T. Berlind, H. Sjöström, J. E. Sundgren, M. Larsson and L. Hultman, Wear, 248, 55 (2001).

  • M. Therasse and M. Benlahsen, Solid State, 129, 139 (2004).

  • N. Hellgren, M. P. Johansson, E. Broitman and P. Sandstrom, Thin Solid Films, 382, 146 (2001).

  • C. Fernandez-Ramo, J. C. Sanchez-Lopez, M. Belin, C. Donnet, L. Ponsonnet and A. Fernandez, Diamond Relat. Mater., 11, 169 (2002).

  • P. Y. Tessier, R. Kre N’guessan, B. Angleraud, V. Fernandez, N. Mubumbila and G. Turban, Surf. Coat. Technol., 125, 295 (2000).

  • J. F. D. Chubaci, K. Ogata, F. Fujimoto, S. Watanabe and J. P. Biersack, Nucl. Instrum. Methods. Phys. Res. B. 116, 452 (1996).

  • N. Mutsukura and K. Ichi Akita, Thin Solid Films, 349, 115 (1999).

  • C. Fernandez -Ramos, J. C. S. Lopez, M. Belin, C. Donnet, F. Pascaretti and A. Fernandez, Vacuum, 67, 551 (2002).

  • C. Fernandez- Ramos, J. C. S. Lopez, A. Justo, T. C. Rojas, I. Papst, F. Hofer and A. Fernandez, Surf. Coat. Technol., 180, 526 (2004).

  • Y. Zhou, D. Probst, A. Thissen, E. Kroke, R. Riedel, R. Hauser, H. Hoche, E. Broszeit, P. Kroll and H. Stafast, J. Eur. Ceram. Soc., 26, 1325 (2006).

  • M. Tabbal, P. Merel, S. Moisa, M. Chaker, E. Gat, A. Ricard, M. Moisan and S. Gujrathi, Surf. Coat. Technol., 98, 1092 (1998).

  • A. Majumdar, J. Schafer, P. Mishra, D. Ghose, J. Meichsner and R. Hippler, Surf. Coat. Technol., 201, 6437 (2007).

  • I. V. Afanasyev-Charkin and M. Nastasi, Surf. Coat. Technol., 186, 108 (2004).

  • S. E. Rodil, A. C. Ferrari, J. Robertson and S. Muhl, Thin Solid Films, 420, 122 (2002).

  • J. Wei, J. Appl. Phys., 89, 410 (2001).

  • C. Fernandez- Ramos, M. J. Sayagues, T. C. Rojas, M. D. Alcala, C. Real and A. Fernandez, Diamond Relat. Mater., 9, 212 (2000).

  • P. Jedrzejowski, J. Cizek, A. Amassian, J. E. K. Sapieha, J. Vlcek and L. Martinu, Thin Solid Films, 447, 201 (2004).


Abstract Views: 289

PDF Views: 3




  • Silicon Carbon Nitride Thin Films Produced by Magnetron Reactive Sputtering Physical Vapour Deposition:Structural, Chemical and Mechanical Characterisation

Abstract Views: 289  |  PDF Views: 3

Authors

P. Kouakou
Laboratoire de Physique Fondamentale et Appliquee, UFR Sciences Fondamentales et Appliquees, Universite Nangui Abrogoua, 02 BP 801 Abidjan 02, Côte d'Ivoire
P. Yoboue
Ecole Supérieure Africaine des Technologies de l’Information et de la Communication (ESATIC), Abidjan, Côte d'Ivoire
B. Ouattara
Laboratoire de Physique Fondamentale et Appliquee, UFR Sciences Fondamentales et Appliquees, Universite Nangui Abrogoua, 02 BP 801 Abidjan 02, Côte d'Ivoire
V. Hody
C. R. P. Gabriel Lippmann, S. A. M., 41 rue du Brill, L-4422 Belvaux, Luxembourg
P. Choquet
C. R. P. Gabriel Lippmann, S. A. M., 41 rue du Brill, L-4422 Belvaux, Luxembourg
M. Belmahi
Institut Jean Lamour (IJL) CNRS UMR 7198, Universite de Lorraine, BP 239, F-54506 Vandoeuvre Cedex, France

Abstract


Amorphous silicon carbon nitride films were deposited on silicon and WC-Co substrates by magnetron reactive sputtering in Ar/N2 gas mixture with carbon and silicon targets. The influence of experimental parameters on the films morphological, structural and mechanical properties was studied. The general morphology of the film is observed by SEM and TEM. EDXS and FTIR were used to determine the film chemical composition and the nature of chemical bonding. It was observed that C≡N bonds and nitrogen percentage in the film are promoted when the substrate is biased. The role of an underlayer and the influence of its nature on the film adhesion on WC/Co substrates were also studied. In this case, nanoscratch tests showed that a SiNx thin film could be an appropriate underlayer.

Keywords


Magnetron Sputtering, Silicon Carbon Nitride (SiCN), SEM, TEM, EDSX, FTIR, Scratch Tests.

References





DOI: https://doi.org/10.18311/jsst%2F2017%2F11022