Journal of Scientific and Technical Research (Sharda University, Noida)

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Carbon Nanotubes for Energy


Affiliations
1 Department of Chemistry, Dr. Hari Singh Gour University, Sagar, Madhya Pradesh, India
     

   Subscribe/Renew Journal


Because of their various nanostructures, carbon nanotubes (CNTs) and graphene have garnered considerable attention, making it a particularly appealing and broad topic in nanotechnology. Graphene and carbon nanotubes (CNTs) both have unique electrical, mechanical, thermal, catalytic, and electrochemical features because they are made up of sp2 hybridized carbon atoms. Carbon nanotube hybrid nanostructured materials (CNT hybrid nanocomposites), Carbon nanotubes (CNTs), and nanotechnology have the potential to improve energy conversion and storage device applications. Carbon nanotubes are being evaluated for application in renewable energy sources, including solar cells and hydrogen storage. Carbon nanotubes (CNTs) are utilized in storage technologies such as Li-ion batteries, supercapacitors, and thermal energy harvesting.

Keywords

Carbon Nanotube, Energy, Li-Ion Batteries, Renewable Energy Sources, Supercapacitors.
User
Subscription Login to verify subscription
Notifications
Font Size

  • S. Iijima, “Helical microtubules of graphitic carbon,” Nature, vol. 354, no. 6348, pp. 56-58, 1991.

  • T. Belin, and F. Epron, “Characterization methods of carbon nanotubes: A review,” Materials Science and Engineering: B, vol. 119, no. 2, pp. 105-118, 2005.

  • H. W. Kroto, and D. R. M. Walton, “Fullerenes: New horizons for the chemistry, physics, and astrophysics of carbon,” NASA STI/Recon Technical Report N, vol. 96, 1993, Art. no. 10755.

  • M. Rahmandoust, and A. Öchsner, “Buckling behavior and natural frequency of zigzag and armchair single-walled carbon nanotubes,” Journal of Nano Research, vol. 16, pp. 153-160, 2011.

  • M. T. Ahmadi, J. F. Webb, R. Ismail, and M. Rahmandoust, “Carbon-based materials concepts and basic physics,” Advanced Nanoelectronics, pp. 49-82, 2018.

  • K. Varshney, “Carbon nanotubes: A review on synthesis, properties, and applications,” International Journal of Engineering Research and General Science, vol. 2, no. 4, pp. 660-677, 2014.

  • B. K. Kaushik, and M. K. Majumder, Carbon NanotubeBased VLSI Interconnects Analysis and Design. New Delhi: Springer India, 2015, pp. 1-14.

  • K. Kierzek et al., “Electrochemical capacitors based on highly porous carbons prepared by KOH activation,” Electrochim. Acta, vol. 49, no. 4, pp. 515-523, 2004.

  • C. E. Banks, and R. G. Compton, “New electrodes for old: From carbon nanotubes to edge plane pyrolytic graphite,” Analyst, vol. 131, no. 1, pp. 15-21, 2006.

  • E. T. Thostenson, Z. Ren, and T. W. Chou, “Advances in the science and technology of carbon nanotubes and their composites: A review,” Composites Science and Technology, vol. 61, no. 13, pp. 1899-1912, 2001.

  • K. I. Tserpes, and P. Papanikos, “Finite element modeling of single-walled carbon nanotubes,” Composites Part B: Engineering, vol. 36, no. 5, pp. 468-477, 2005.

  • C. Li, and T. W. Chou, “A structural mechanics approach for the analysis of carbon nanotubes,” International Journal of Solids and Structures, vol. 40, no. 10, pp. 2487-2499, 2003.

  • D. Vairavapandian, P. Vichchulada, and M. D. Lay, “Preparation and modification of carbon nanotubes: Review of recent advances and applications in catalysis and sensing,” Analytica Chimica Acta, vol. 626, no. 2, pp. 119-129, 2008.

  • M. S. Dresselhaus, G. Dresselhaus, and R. Saito, “Physics of carbon nanotubes,” Carbon, vol. 33, no. 7, pp. 883-891, 1995.

  • M. Trojanowicz, “Analytical applications of carbon nanotubes: A review,” TracTrends in Analytical Chemistry, vol. 25, no. 5, pp. 480-489, 2006.

  • T. Guo, P. Nikolaev, A. Thess, D. T. Colbert, and R. E. Smalley, “Catalytic growth of single-walled nanotubes by laser vaporization,” Chemical Physics Letters, vol. 243, no. 1-2, pp. 49-54, 1995.

  • J. H. Hafner, M. J. Bronikowski, B. R. Azamian, P. Nikolaev, A. G. Rinzler, D. T. Colbert,... and R. E. Smalley, “Catalytic growth of single-wall carbon nanotubes from metal particles,” Chemical Physics Letters, vol. 296, no. 1-2, pp. 195-202, 1998.

  • S. Lebedkin, P. Schweiss, B. Renker, S. Malik, F. Hennrich, M. Neumaier,... and M. M. Kappes, “Singlewall carbon nanotubes with diameters approaching 6 nm obtained by laser vaporization,” Carbon, vol. 40, no. 3, pp. 417-423, 2002.

  • A. Venkataraman, E. V. Amadi, Y. Chen, and C. Papadopoulos, “Carbon nanotube assembly and integration for applications,” Nanoscale Research Letters, vol. 14, no. 1, pp. 1-47, 2019.

  • F. L. Darkrim, P. Malbrunot, and G. P. Tartaglia, “Review of hydrogen storage by adsorption in carbon nanotubes,” International Journal of Hydrogen Energy, vol. 27, no. 2, pp. 193-202, 2002.

  • D. Shi, Z. Guo, and N. Bedford, “Carbon nanotubes,” Nanomaterials and Devices, pp. 49-82, 2015.

  • G. G. Tibbetts, G. P. Meisner, and C. H. Olk, “Hydrogen storage capacity of carbon nanotubes, filaments, and vapor-grown fibers,” Carbon, vol. 39, no. 15, pp. 2291-2301, 2001.

  • Y. T. Ong, A. L. Ahmad, S. H. S. Zein, and S. H. Tan, “A review on carbon nanotubes in environmental protection and green engineering perspective,” Brazilian Journal of Chemical Engineering, vol. 27, no. 2, pp. 227-242, 2010.

  • K. V. Wong, and B. Bachelier, “Carbon nanotubes used for renewable energy applications and environmental protection/remediation: A review,” Journal of Energy Resources Technology, vol. 136, no. 2, 2014.

  • V. Sgobba, and D. M. Guldi, “Carbon nanotubes as integrative materials for organic photovoltaic devices,” Journal of Materials Chemistry, vol. 18, no. 2, pp. 153-157, 2008.

  • S. Cataldo, P. Salice, E. Menna, and B. Pignataro, “Carbon nanotubes and organic solar cells,” Energy and Environmental Science, vol. 5, no. 3, pp. 5919-5940, 2012.

  • M. C. Scharber, D. Mühlbacher, M. Koppe, P. Denk, C. Waldauf, A. J. Heeger, and C. J. Brabec, “Design rules for donors in bulk-heterojunction solar cells - Towards 10% energy-conversion efficiency,” Advanced Materials, vol. 18, no. 6, pp. 789-794, 2006.

  • W. Fan, L. Zhang, and T. Liu, Graphene-Carbon Nanotube Hybrids for Energy and Environmental Applications. Springer Singapore, 2017.

  • W. Yuan, Y. Zhang, L. Cheng, H. Wu, L. Zheng, and D. Zhao, “The applications of carbon nanotubes and graphene in advanced rechargeable lithium batteries,” Journal of Materials Chemistry A, vol. 4, no. 23, pp. 8932-8951, 2016.

  • A. C. Dillon, “Carbon nanotubes for photoconversion and electrical energy storage,” Chemical Reviews, vol. 110, no. 11, pp. 6856-6872, 2010.

  • P. J. Hall, M. Mirzaeian, S. I. Fletcher, F. B. Sillars, A. J. Rennie, G. O. Shitta-Bey,... and R. Carter, “Energy storage in electrochemical capacitors: Designing functional materials to improve performance,” Energy and Environmental Science, vol. 3, no. 9, pp. 1238-1251, 2010.

  • S. Yoon, C. Lee, S. M. Oh, Y. K. Park, and W. C. Choi, “Preparation of mesoporous carbon/manganese oxide materials and its application to supercapacitor electrodes,” Journal of Non-Crystalline Solids, vol. 355, no. 4-5, pp. 252-256, 2009.

  • E. Frackowiak, K. Metenier, V. Bertagna, and F. Beguin, “Supercapacitor electrodes from multiwalled carbon nanotubes,” Applied Physics Letters, vol. 77, no. 15, pp. 2421-2423, 2000.

  • J. M. Moon, K. H. An, Y. H. Lee, Y. S. Park, D. J. Bae, and G. S. Park, “The high-yield purification process of single-walled carbon nanotubes,” The Journal of Physical Chemistry B, vol. 105, no. 24, pp. 5677-5681, 2001.

  • H. G. Hertz, and S. K. Ratkje, “Theory of thermocells,” Journal of the Electrochemical Society, vol. 136, no. 6, p. 1698, 1989.

  • M. S. Romano, S. Gambhir, J. M. Razal, A. Gestos, G. G. Wallace, and J. Chen, “Novel carbon materials for thermal energy harvesting,” Journal of Thermal Analysis and calorimetry, vol. 109, n.3, pp. 1229-1235,2012.

  • R. Goncalves, and T. Ikeshoji, “Comparative studies of a thermoelectric converter by a thermogalvanic cell with a mixture of concentrated potassium ferrocyanide and potassium ferricyanide aqueous solutions at great temperature differences,” J. Braz. Chem. Soc, vol. 3, no. 3, pp. 98-101, 1992.

  • Q. Zhang, Z. Bai, F. Du, and L. Dai, “Carbon nanotube energy applications,” Nanotube Superfiber Materials. William Andrew Publishing, 2019, pp. 695-728.

  • J. B. Allen, and R. F. Larry, Electrochemical Methods Fundamentals and Applications. John Wiley & Sons, 2001.


Abstract Views: 255

PDF Views: 0




  • Carbon Nanotubes for Energy

Abstract Views: 255  |  PDF Views: 0

Authors

Bharat Kachhi
Department of Chemistry, Dr. Hari Singh Gour University, Sagar, Madhya Pradesh, India
Sarita Rai
Department of Chemistry, Dr. Hari Singh Gour University, Sagar, Madhya Pradesh, India

Abstract


Because of their various nanostructures, carbon nanotubes (CNTs) and graphene have garnered considerable attention, making it a particularly appealing and broad topic in nanotechnology. Graphene and carbon nanotubes (CNTs) both have unique electrical, mechanical, thermal, catalytic, and electrochemical features because they are made up of sp2 hybridized carbon atoms. Carbon nanotube hybrid nanostructured materials (CNT hybrid nanocomposites), Carbon nanotubes (CNTs), and nanotechnology have the potential to improve energy conversion and storage device applications. Carbon nanotubes are being evaluated for application in renewable energy sources, including solar cells and hydrogen storage. Carbon nanotubes (CNTs) are utilized in storage technologies such as Li-ion batteries, supercapacitors, and thermal energy harvesting.

Keywords


Carbon Nanotube, Energy, Li-Ion Batteries, Renewable Energy Sources, Supercapacitors.

References