Metal Injection Molding - A Review
Subscribe/Renew Journal
Metal Injection Molding (MIM) is relatively a new technology for producing metal components of complex geometry. MIM is an extension of powder metallurgy process. Various products of metals and its alloys including difficult-to-machine materials such as titanium, tungsten etc., can be effectively manufactured by MIM process. MIM process comprises of four steps; mixing of metal powders with binders, injection molding of coated-metal powders to produce green parts, de-binding to separate binders from green part and the final stage is sintering. The process parameters in mixing, injection molding, de-binding and sintering play a vital role in the quality of final product.
This paper is aimed at reviewing the MIM process parameters and materials.
Keywords
- Moballegh, L; Morshedian, J; Esfandeh, M: Copper injection molding using a thermoplastic binder based on paraffin wax, 'Materials Letters', vol. 59, no. 22, 2005, 2832-2837.
- Liu, ZY; Loh, NH; khor, KA; Tor, SB: Sintering of injection molded M2 high-speed steel, 'Material Letters', vol. 45, no. 1, 2000, 32-38.
- Ozgun, Ozgur; Gulsoy, H Ozkan; Yilmaz, Ramazan; Findik, Fehim: Injection molding of nickel based 625 superalloy: Sintering, heat treatment, microstructure and mechanical properties, 'Journal of Alloys and Compounds', vol. 546, 2013, 192-207.
- Ebel, T: Metal Injection Molding of Titanium, 'Materials Science Forum', vol. 690, 2011, 181-184.
- Luo, TG; Qu, XH; Qin, ML; Ouyang, ML: Dimension precision of metal injection molded pure tungsten, 'Int. Journal of Refractory Metals & Hard Materials', vol. 27, no. 3, 2009, 615-620.
- Loh, NH; Tor, SB; Khor, KA: Production of metal matrix composite part by powder injection molding, 'Journal of Materials Processing Technology', vol. 108, no. 3, 2001, 398-407.
- Li, Duxin; Hou, Haitao; Tan, Zhaoqiang; Lee, Kun: Metal injection Molding of pure Molybdenum, 'Advanced Powder Technology', vol. 20, no. 5, 2009, 480-487.
- Ye, Hezhou; Liu, Xing Yang; Hong, Hanping: Fabriction of metal matrix composites by metal injection molding - A review, 'Journal of Materials Processing Technology', vol. 200, no. 1-3, 2008, 12-24.
- Kryachek, VM: Injection Molding (Review), 'Powder Metallurgy and Metal Ceramics', vol. 43, no. 7-8, 2004.
- Bose, Animesh; Otsuka, Isamu, Yoshida, Takafumi; Toyashima, Hisataka: Metal Injection Molding of Ultra-Fine 316L Stainless Steel Powders, 'Advances in Powder Metallurgy & Particulate Materials', 2007.
- Loh, NH; Tor, SB; Khor, KA: Production of metal matrix composite part by powder injection molding, 'Journal of materials processing technology', vol. 108, no. 3, 2001, 398-407.
- Hwang, KS: Common defects in metal injection molding (MIM).
- Piotter, V: Micro metal injection molding (MicroMIM).
- Shu-quan, Liang; Yan, Tang; Bai-yun, Huang: Rheology in metal powder injection molding, J.Cent . South Univ. Technol., 2007, sl-0372-06
Abstract Views: 397
PDF Views: 1