Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Investigation on Friction Stir Welding of AA 6082 Alloy Using Taguchi Technique


Affiliations
1 Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
     

   Subscribe/Renew Journal


Friction Stir Welding (FSW) is a solid state welding process in which the heat for welding is produced by the relative motion between the tool and the two interfaces being joined. In this present study, AA-6082 alloy is friction stir welded for different combination of tool rotation speed and tool feed. Here a cylindrical tapered tool along with a profiled probe is rotated and fed at a constant traverse rate in to the joint. Taguchi technique is used to design the experiments. Total four experiments are conducted. The UTS and hardness for all four welded parts are measured by UTM and Vickers hardness tester respectively. Analysis is done and the optimum parameters are obtained and presented.

Keywords

Friction Stir Welding, Orthogonal Arrays, Taguchi, ANOVA, AA-6082.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 189

PDF Views: 0




  • Experimental Investigation on Friction Stir Welding of AA 6082 Alloy Using Taguchi Technique

Abstract Views: 189  |  PDF Views: 0

Authors

P. V. R. Ravindra Reddy
Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
P. Radhakrishna Prasad
Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
G. Chandra Mohan Reddy
Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
A. Sarotham Reddy
Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India
K. Srikanth
Dept. of Mechanical Engg., CBIT, Gandipet, Hyderabad, India

Abstract


Friction Stir Welding (FSW) is a solid state welding process in which the heat for welding is produced by the relative motion between the tool and the two interfaces being joined. In this present study, AA-6082 alloy is friction stir welded for different combination of tool rotation speed and tool feed. Here a cylindrical tapered tool along with a profiled probe is rotated and fed at a constant traverse rate in to the joint. Taguchi technique is used to design the experiments. Total four experiments are conducted. The UTS and hardness for all four welded parts are measured by UTM and Vickers hardness tester respectively. Analysis is done and the optimum parameters are obtained and presented.

Keywords


Friction Stir Welding, Orthogonal Arrays, Taguchi, ANOVA, AA-6082.