Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Forming Limit Diagram for Austenitic Stainless Steels


Affiliations
1 Department of Production Technology, Madras Institute of Technology, Chrompet, Anna University, Chennai-600044, India
2 Metal Forming and Tribology Section, Indira Gandhi Center for Atomic Research, Kalpakkam, India
3 Department of Mechanical Engineering, St. Joseph’s College of Engineering, Chennai-600119, India
     

   Subscribe/Renew Journal


Austenitic stainless steels are special grades of steels with improved corrosion resistance and oxidation resistance. In this work forming limit diagrams (FLDs) for Austenitic stainless steels of grades AISI 316 and 316L of thickness 1.25mm have been studied and their suitability for forming applications have been examined. FLDs were experimentally found using the hemispherical punch forming test. The micro structural aspects, tensile properties, formability parameters of the above mentioned steels were studied and compared. The fracture surfaces of the formed samples were viewed using the scanning electron microscope (SEM) and the SEM images were correlated with the fracture behavior and formability of the sheet metal. It was found that the formability of AISI 316L posses good drawability and stretchability.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 212

PDF Views: 0




  • Forming Limit Diagram for Austenitic Stainless Steels

Abstract Views: 212  |  PDF Views: 0

Authors

R. Ramadoss
Department of Production Technology, Madras Institute of Technology, Chrompet, Anna University, Chennai-600044, India
A. Rajadurai
Department of Production Technology, Madras Institute of Technology, Chrompet, Anna University, Chennai-600044, India
S. Venugopal
Metal Forming and Tribology Section, Indira Gandhi Center for Atomic Research, Kalpakkam, India
S. Satishkumar
Department of Mechanical Engineering, St. Joseph’s College of Engineering, Chennai-600119, India

Abstract


Austenitic stainless steels are special grades of steels with improved corrosion resistance and oxidation resistance. In this work forming limit diagrams (FLDs) for Austenitic stainless steels of grades AISI 316 and 316L of thickness 1.25mm have been studied and their suitability for forming applications have been examined. FLDs were experimentally found using the hemispherical punch forming test. The micro structural aspects, tensile properties, formability parameters of the above mentioned steels were studied and compared. The fracture surfaces of the formed samples were viewed using the scanning electron microscope (SEM) and the SEM images were correlated with the fracture behavior and formability of the sheet metal. It was found that the formability of AISI 316L posses good drawability and stretchability.