![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_open_medium.gif)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_restricted_medium.gif)
Machining of Magnesium Alloys:A Review
Subscribe/Renew Journal
Magnesium and its alloys are widely used in a number of applications including automotive and aerospace. Because of its biocompatibility, it is also being used in many medical applications including orthopedics. Machining is a commonly used manufacturing process to produce components. Magnesium because of its characteristics like light weight and other mechanical properties is the easiest to machine. But there are several issues related to its machining. There has been considerable research work going on outside India regarding machinability studies of magnesium alloys, but there have been very minimal efforts going on in India. In order to understand the various issues related to machining of magnesium alloys, this review is an honest effort to review the literature available regarding the same and classify them based on areas of relevance in machining and then draw some major conclusions from the review. The authors feel this review will help prospective researchers to get necessary information about machining of magnesium alloys.
Keywords
Magnesium Machining, Cryogenic Machining, Surface Integrity, Optimization, Cutting Temperature.
User
Subscription
Login to verify subscription
Font Size
Information
- BeratBaris BULDUM et al.: Investigation of Mg alloys machinability, ‘International Journal of Electronics; Mechanical and Mechatronics engineering’, 2(3), 261-268
- Siobhan Fleming : A thesis of ‘An overview of Mg based alloys for Aerospace and Automotive applications’, Rensselaer Polytechnic Institute, Hartford, CT, 2012
- F.Z.Fang, et.al. : Mean flank temperature measurement in high speed dry cutting of Magnesium alloy, Journal of Materials Processing Technology, 167, 2005, 119–123
- B.L. Mordike, T. Ebert : Magnesium-Properties—applications—potential, ‘Materials Science and Engineering’, A302, 2001, 37 – 45
- HisaoWatarai : Trend of research and development for magnesium alloys. ‘Reducing the weight of structural materials in motor vehicles, Science and technology Trends, 18, 2006, 84-97
- Robert E. Brown, :Mechanical Engineers’ Handbook: Materials and Mechanical Design, Volume 1, Third Edition.John Wiley & Sons, Inc. 2006
- D. Carou et al. : Machinability of Mg and its Alloys: A Review, ‘Springer-Verlag, Berlin Heidelberg, 2015
- SukantaBhowmick et al.: Dry and minimum quantity lubrication drilling of cast Magnesium alloy (AM60), ‘International Journal of Machine Tools & Manufacture’, 50, 2010, 444 –457
- Jeong Du Kim and Keon-BeomLee : Surface roughness evaluation in dry-cutting of Magnesium alloy by Air pressure coolant, ‘Engineering’, 2, 2010, 788-792
- SukantaBhowmick: Minimum Quantity Lubrication Machining ofAluminum and Magnesium Alloys, Windsor, Ontario, Canada, 2011
- Zhengwen Pu: Cryogenic Machining And Burnishing of AZ31B Magnesium Alloy for Enhanced Surface Integrity and FunctionalPerformance, University of Kentucky, Lexington, Kentucky, 2012
- A.H. Kheireddine et al. : An FEM analysis with experimental validation to study the hardness of In-process cryogenically cooled drilled holes in Mg AZ31b, Procedia CIRP, 8, 2013, 588 – 593
- D. Carou et al.: Experimental investigation on surface finish during intermittent turning of UNS M11917 Magnesium alloy under dry and near dry machining conditions, ‘Measurement’, 56, 2014, 136–154
- Eva Mario Rubio et al.: Comparative Analysis of Sustainable Cooling Systems in Intermittent Turning of Magnesium Pieces, ‘International Journal Of Precision Engineering And Manufacturing’, 15(5), 2014, 929-940
- Z. Pu et al.: Finite element modeling of microstructural changes in dry and cryogenic machining of AZ31B Mg alloy, ‘Journal of Manufacturing Processes’, 16, 2014, 335–343
- Bogdan Chirita, Gheorghe Mustea and Gheorghe Brabie : A statistical analysis applied for optimal cooling system selection and for a superior surface quality of machined magnesium alloy parts, ‘J Engineering Manufacture’, 229(3), 2015, 392–408
- Mohd. Danish, Turnad Lenggo Ginta and Bambang Ari Wahjoedi: Enhanced functional properties of Mg alloys by Cryogenic machining, International Journal of Applied Engineering Research’, 11(7), 2016, 50555059
- Nikola TOMAC, Kjell TONNESSEN and TonciMIKAC : Study of Influence of Al content on Machinability of Mg alloys, ‘Strojarstvo’, 50(6), 2008, 363 - 367
- BirolAkyuz : Machinability of Mg and its alloys, ‘Journal of Science and Technology’, 1(3), 2011,31-38
- BirolAkyuz: Influence of Al content on machinability of AZ series Mg alloys, ‘Trans. Nonferrous Met. Soc. China’, 23, 2013, 2243-2249
- BirolAKYUZ : Comparison of the machinability and wear properties of Mg alloys, International ‘Journal of Advanced Manufacturing Technology’, 75, 2014, 1735–1742
- Birol AKYUZ: Influence of Al content on Machinability of AS series cast Mg alloys, ‘Trans. Nonferrous Met. Soc. China’, 24, 2014, 3452−3458
- BirolAkyuz, : Effects of Si and Zn on machinability and wear resistance of AZ91 and AS91 Mg alloys, ‘Materials Testing’, 56, 2014, 703-708
- BirolAkyuz : A study on wear and machinability of AZ series (AZ01-AZ91) cast Magnesium alloys, ‘Metallic Materials’, 52, 2014, 255–262
- C.C. Grigoras and G. Brabie : The influence of milling parameters on the material hardness in the case of Mg alloy AZ61A, ‘Materials Science and Engineering’, 95, 2015, 1-6
- Kaining Shi et al. : Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with a carbide tool, ‘Advances in Mechanical Engineering’, 8(1), 2016, 1–9
- B. RatnaSunil et al. : Effect of aluminium content on machining characteristics of AZ31 and AZ91 Mg alloys during drilling, ‘Journal of Magnesium and Alloys’, 4, 2016, 15–21
- JunzhanHou, Wei Zhou and Ning Zhao : Methods for Prevention of ignition during machining of Mg alloys, ‘Key Engineering Materials’, 447-448, 2010, 150-154
- JozefKuczmaszewski and Ireneusz Zagorski: Methodological problems of temperature measurement in the cutting area during milling Mg alloys, ‘Management and Production Engineering Review’, 4(3), 2013,26–33
- Viktor P. Astakhov, Surface Integrity – Definition and Importance in Functional Performance, ‘Surface Integrity in Machining’, Springer-Verlag London Limited, 2009, 1-35,
- Z Pu et al.: Surface integrity in Dry and Cryogenic Machining of AZ31B Mg alloy with varying cutting edge radius tools, ‘Procedia Engineering, 19, 2011, 282 – 287
- Z.Pu et al. : Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components, ‘International Journal of Machine Tools & Manufacture’ 56, 2012, 17 –27.
- Z. Pu et al.: FEM of microstructural changes in Dry and Cryogenic machining of AZ31B Mg alloy for enhanced corrosion resistance, ‘Proceedings of NAMRI/SME’, 41, 2013
- N.Wojtowicz et al. : The influence of cutting conditions on surface integrity of a wrought magnesium alloy, ‘Procedia Engineering’, 63, 2013, 20-28
- I. Danis et al. : Cutting conditions and surface integrity during dry plunge-milling of a wrought magnesium alloy, ‘Procedia Engineering’, 63, 2013, 3-44
- Jose Outeiro et al. : Residual stresses induced by dry and cryogenic cooling during machining of AZ31B Mg alloy, ‘Advanced Materials Research’, 996, 2014, 658-663
- Olga Gziut, JozefKuczmaszewski and IreneuszZagorski : Surface quality assessment following High performance cutting of AZ91HP Mg alloy, ‘Management and Production Engineering Review’, 6(1), 2015, 4–9
- H.K.Tonshoff and J.Winkle : The influence of tool coatings in machining of magnesium, ‘Surface and Coatings Technology’, 94-95, 1997, 610-616
- E. Gariboldi : Drilling a Mg alloy using PVD coated twist drills, ‘Journal of Material Processing Technology’, 134, 2003, 287-295
- Eva Maria Rubio et al. : Experimental study of the Dry machining of Magnesium pieces based on the surface roughness, ‘International Journal of Precision Engineering and Manufacturing’, 14(6), 2013, 995-1001
- D.Carou et al.: Experimental investigation on finish intermittent turning of UNS M11917 Magnesium alloy under Dry machining, ‘International Journal of Advanced Manufacturing Technology’, 75, 2014, 1417-1429
- D. Carou et al.: Analysis of ignition risk in intermittent turning of UNS M11917 Mg alloy at low cutting speeds based on the chip morphology, ‘J Engineering Manufacture’, 229(2), 2015, 365–371
- M. Villeta et al.: Surface finish optimization of Mg pieces obtained by Dry turning based on Taguchi techniques and Statistical tests, ‘Materials and Manufacturing Processes’, 26:12, 2011, 1503-1510
- Maria Villeta et al.: Efficient optimization of machining processes based on technical specifications for surface roughness: Application to Mg pieces in the aerospace industry, ‘International Journal of Advanced Manufacturing Technology’, 60, 2012, 1237 – 1246
- BerilEker et al.: Sustainable machining of the Magnesium alloy material in the CNC lathe machine and optimization of the cutting conditions, ‘MECHANIKA’, 20(3), 2014, 310-316
- Vishwanathan R. and Ramesh S. : Optimization of turning parameters on tool wear for Mg alloy using Taguchi techniques, ‘International Journal of Engineering’, 1-2, 2014, 46-50
- R. Vishwanathan and S.Ramesh : Optimization of machining parameters for Magnesium alloy using Taguchi approach and RSM, International Conference on Advances in Design and Manufacturing, ‘International Conference on Advances in Design and Manufacturing’, 2014, 337-340
- Kaining Shi, Dinghua Zhang and JunxueRen : Optimization of process parameters for surface roughness and microhardness in dry milling of Mg alloy using Taguchi with Grey relational analysis, ‘International Journal of Advanced Manufacturing Technology’, 81, 2015, 645–651
- S. Ramesh, R. Vishwanathan and S. Ambika: Measurement and Optimization of surface roughness and tool wear via Grey relational analysis, TOPSIS and RSA techniques, ‘Measurement’, 78, 2016, 63–72
- C.Blawert, N.Hort and K.U. Kainer : Automotive applications of Mg and its alloys, ‘Trans. Indian Institute of Metals’, 57(4), 2004, 397-408
- I. Ostrovsky*, Y. Henn : Present state and future of magnesium application in Aerospace industry, ‘International Conference “NEW CHALLENGES IN AERONAUTICS” ASTEC’07, 2007, 1-7
- Mustafa Kamal, Kulekci : Mg and its alloys applications in Automotive industry, ‘International Journal of Advanced Manufacturing Technology’ 39, 2008, 851–865
- Musfirah A.H. et al.: Mg and Al alloys in automotive industry, ‘Journal of Applied Sciences Research’, 8 (9), 2012, 4865-4875
- JithuJayaraja, et.al.: Magnesium – in Indian Context, ‘Indian Foundry Journal’, 61 (2), February 2015, 49-55.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 616
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 6