Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Gauss Elimination Method Based Mathematical Model for Gap Current in CNC-WEDM for Effective Machining of AlSiC MMC


Affiliations
1 Mech. Engg. Department, Punjab Engineering Coilege, Chandigarh -160012, India
2 Production Engineering Department, Jadavpur University, Koikata-700032, India
     

   Subscribe/Renew Journal


In the experimental study, Taguchi method, a powerful tool in the design of experiment is used to optimize the parametric combination of CNC-Wire cut-EDM for effective machining of Al-SiC MMC. From experimental results and through analysis of variance (ANOVA) the significant factors are determined for favorable gap current (Ig). Mathematical model relating to the gap current is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of AI/SiC-MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 220

PDF Views: 0




  • Gauss Elimination Method Based Mathematical Model for Gap Current in CNC-WEDM for Effective Machining of AlSiC MMC

Abstract Views: 220  |  PDF Views: 0

Authors

A. Manna
Mech. Engg. Department, Punjab Engineering Coilege, Chandigarh -160012, India
B. Bhattacharya
Production Engineering Department, Jadavpur University, Koikata-700032, India

Abstract


In the experimental study, Taguchi method, a powerful tool in the design of experiment is used to optimize the parametric combination of CNC-Wire cut-EDM for effective machining of Al-SiC MMC. From experimental results and through analysis of variance (ANOVA) the significant factors are determined for favorable gap current (Ig). Mathematical model relating to the gap current is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of AI/SiC-MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.