Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Optimization of Machining Parameters for Multi-Tool Milling Operations Using Memetic Algorithm


Affiliations
1 School of Mechanical Engineering, Shanmugha Arts, Science, Technology & Research Academy, Thanjavur-613402, India
2 Department of Production Engineering, Regional Engineering College, Tiruchirappalli-620015, India
3 Department of Mechanical Engineering, J.J. College of Engineering & Technology, Tiruchirappalli-620009, India
     

   Subscribe/Renew Journal


In metal cutting process, cutting conditions have an influence on reducing the production time and cost. The variables affecting the economics of machining operations are numerous and include machine tool capacity, cutting conditions of velocity, feed rate and depth of cut. This paper describes a procedure to calculate the machining conditions for milling operations according to maximum profit rate as the objective function. In this work optimization procedures based on the Memetic Algorithm were developed for the optimization of machining parameters for multi-tool milling operation. An example has been presented at the end of the paper to give clear picture from the application of the system and its efficiency The results are compared and analyzed with Method of feasible direction and Handbook recommendations.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 225

PDF Views: 0




  • Optimization of Machining Parameters for Multi-Tool Milling Operations Using Memetic Algorithm

Abstract Views: 225  |  PDF Views: 0

Authors

N. Baskar
School of Mechanical Engineering, Shanmugha Arts, Science, Technology & Research Academy, Thanjavur-613402, India
P. Asokan
Department of Production Engineering, Regional Engineering College, Tiruchirappalli-620015, India
R. Saravanan
Department of Mechanical Engineering, J.J. College of Engineering & Technology, Tiruchirappalli-620009, India
G. Prabhaharan
Department of Production Engineering, Regional Engineering College, Tiruchirappalli-620015, India

Abstract


In metal cutting process, cutting conditions have an influence on reducing the production time and cost. The variables affecting the economics of machining operations are numerous and include machine tool capacity, cutting conditions of velocity, feed rate and depth of cut. This paper describes a procedure to calculate the machining conditions for milling operations according to maximum profit rate as the objective function. In this work optimization procedures based on the Memetic Algorithm were developed for the optimization of machining parameters for multi-tool milling operation. An example has been presented at the end of the paper to give clear picture from the application of the system and its efficiency The results are compared and analyzed with Method of feasible direction and Handbook recommendations.